• Macromolecular Research
• /
• v.10 no.3
• /
• pp.168-173
• /
• 2002

Unstabilized low-density polyethylene (LDPE) films and films formulated with hindered amine light stabilizer (HALS) were exposed to UV-radiation; and the physicochemical changes during photooxidation processes have been investigated using tensile, FTIR spectre-photometric and thermal analytical (DSC) techniques. The dependence of tensile properties (elongation- and stress-at-break), carboxyl index and heat of fusion on UV-irradiation time have been discussed. The use of HALS is found to be effective in maintaining the UV-mechanical properties of the LDPE films. The experimental results showed that there exists no correlation between mechanical properties and carbonyl index, whereas crystallinity correlates well with carbonyl index in unstabilized and stabilized films for irradiation times greater than 100 h. The rate of formation of carbonyl groups is found to be dependent on UV exposure time. Crystallinity of the film samples is strongly influenced by both exposure time and presence of HALS.

• Journal of Korea Foundry Society
• /
• v.38 no.5
• /
• pp.95-102
• /
• 2018

The dependence of the tensile properties on variations in the porosity of A356 aluminium alloys was investigated in terms of the quality index of the tensile properties based upon the ultimate tensile strength and elongation as well as the variation of the strength coefficient and strain-hardening exponent with regard to a T6 treatment. The test specimens were prepared by low-pressure die-casting and a subsequent T6 treatment, and the experimental results of a tensile test carried out at room temperature were compared to the theoretical description using a modified constitutive model. The nominal value of the quality index of A356 alloys increases gradually with a lapse of the ageing time upon a T6 treatment, despite the fact that this value is temporarily decreased during the initial stage of ageing from a solutionised condition. Additionally, the quality index depends practically upon the porosity variation with a power law relationship without regard to whether in solutionised or artificial aged conditions. The theoretical description indicates that the strength coefficient directly determines the nominal level of the quality index. Moreover, the overall dependence of the quality index on the porosity variation is remarkably weakened with an increase in the tensile strain, whereas the quality index depends sensitively upon the porosity variation with a low value of the strain-hardening exponent.

• The Journal of Engineering Geology
• /
• v.34 no.1
• /
• pp.67-105
• /
• 2024

This study compares the quartzites of four quartzite units: The Fagfog Quartzite, Dunga Quartzite (member of the Robang Formation), Pandrang Quartzite (member of the Kalitar Formation) and the Chisapani Quartzite. The analysis shows variations in flakiness and elongation, as the Fagfog Quartzite displays low flakiness whereas the Pandrang and the Chisapani have moderate and the Dunga Quartzite has shown variations. The density values of the four quartzite units remain consistent, indicating uniform physical properties and porosity levels. However, bulk density values differ among the quartzites, suggesting variations in particle arrangement, porosity, and density. Regarding strength measures, the Pandrang and the Chisapani Quartzite have higher strength characteristics as compared to the Fagfog and the Dunga Quartzites. The Pandrang Quartzite has the highest average point load strength index, classifying it as "Extremely Strong". The resistance to impact and crushing forces varies among the quartzites, with lower Aggregate Impact Value (AIV) and Aggregate Crushing Value (ACV) indicating higher strength and durability. Durability tests show that the Fagfog Quartzite has high durability against slaking, with a slight decrease observed after the fifth cycle. The Dunga Quartzite shows varying degrees of weathering, while the Pandrang and the Chisapani Quartzite have minimal weight changes, indicating strong resistance to weathering. Magnesium sulfate soundness tests indicate high durability and resistance to degradation for all four units. The Los Angeles abrasion value (LAAV) tests indicate favorable resistance to abrasion for the majority of the Fagfog, Dunga, and the Pandrang Quartzites samples, while Chisapani Quartzite shows more variability in LAAV values. The Pandrang Quartzite shows a higher proportion of elongated particles but lower flakiness index values as compared to Fagfog and Dunga Quartzites while Chisapani Quartzite stands out with a significantly higher presence of flaky particles and lower elongation index values. Mechanically, the Fagfog and Dunga Quartzite show higher strength and better resistance to abrasion and freeze and thaw. The Pandrang Quartzite shows moderate resistance to crushing and sudden effect, while the Chisapani Quartzite has variable resistance to effect. This comparative study emphasizes the diversity and complexity of quartzite rock types, showing the need for comprehensive characterization and assessment to determine their suitability for specific applications.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.13-19
• /
• 2020

4,4'-Methylenebis(2-chlorobenzenamine) (MOCA)-free fast curing polyurethanes were prepared. In this study, the processibility of a fast curing polyurethane system was characterized by assessing the pot life. The obtained pot life of the polyurethane was 6-8 s, indicating that this prepolymer-curative system is appropriate for ribbon flow casting. The influence of the NCO index on the viscosity and mechanical properties was evaluated. The viscosity, tensile strength, tear strength, and hardness of the as-prepared polyurethanes showed an increasing trend, with an increase in the NCO index, whereas the elongation at break increased initially and then decreased with an increase in the NCO index. The gel fraction and crosslink density showed a direct correlation with the NCO index, which substantiated the improved mechanical properties at the higher NCO index. The coefficients of friction and abrasion deteriorated with an increase in the NCO index.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.31-35
• /
• 1973

Strength, elongation and elasticity are essential properties with regard to the tensile properties of raw silk thread. The reasonable harmony of the above three physical characters appears to be the specific nature of the raw silk thread and the dynamical functions are determined by the cocoon filament forming the raw silk. From such viewpoint, the author has studied the tensile property of the thread when the cocoon filament is stretched and transformed. The results obtained are as follows: 1) The stretching strength of the inner layer filament is stronger than that of the outer and medium layer ones. 2) The stretching strength of the filaments is influenced by the moisture-heat denaturalization of cocoon layer sericin in the drying process. 3) The more transformed functions by the stretching become, the lower the elasticity index of the cocoon filament was shown. 4) When cocoon layer sericin is denatured by moisture and heat, elasticity index of the filament is decreased.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1408-1410
• /
• 1997

Arrhenius plots are useful in predicting long-term use temperatures of organic materials and in choosing parameters for accelerated aging. The effects of antioxidant on the heat resistance and temperature index of EPDM rubber used for electrical insulation were investigated. The short-time points were obtained by 50% retention of elongation at break.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.155-162
• /
• 2010

Nylon 6 was blended with a brominated epoxy resin, tetrabromobisphenol A diglycidyl ether (DGEBBA), to enhance flame retardant property. Thermal properties of the blends were analyzed by DSC. Melting point and crystallization temperature decreased as the amount of epoxy resin increased. Melt index and relative viscosity decreased as the amount of the epoxy resin increased. When the blended amount of the epoxy resin was below 5%, the melt index decreased while the relative viscosity slightly increased. The blend resin was successfully spun into fiber without swelling or drawing the resonance phenomena. However, both the tenacity and elongation of the fiber decreased by increasing the amount of the DGEBBA.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.297-302
• /
• 2004

In many engineering applications, the final decision is based on the evaluation of a number of alternatives in terms of a number of criteria. This problem may become very intricate when the selection criteria are expressed in terms of different units or the pertinent data are difficult to be quantified. The Analytic Hierarchy Process (AHP) is an effective way in dealing with such kind of complicated problems. Cotton fiber is selected or graded, in the spinning industries, based on several quality criteria. However, the existing selection or grading method based on Fiber quality Index (FqI) is rather crude and ambiguous. This paper presents a novel approach of cotton fiber selection using the AHP methodology of Multi Criteria Decision Making.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.602-606
• /
• 2014

In this study, we observed changes in the physical properties of norbornene dialkyl ester applied to a PVC. The PVC specimens were prepared by blending PVC, norbornene dialkyl ester and stabilizers. Then, the hardness, tensile strength, elongation, tearing strength, transmittancy, haze and yellowness index of these specimens were measured, and were compared with DOP. The hardness of compounds except dicyclohexyl-5-norbornene-2,3-dicarboxylate (DCHN) were an equal to or higher than that of DOP. The tearing strength and tensile characteristic of DCHN could not be analyzed due to its high hardness. Tensile properties such as the tensile strength and elongation were improved for six compounds except diisononyl-5-norbornene-2,3-dicarboxylate (DINN). All compounds measured showed better tearing strength and transmittancy than those of DOP. Also all norbornene derivatives except DDN showed good haze indices. The yellowness index of DON and DPN showed similar values as DOP.

• Clean Technology
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2006

In this study, photo-cuarable urethane methacrylate oligomers were synthesized from polyether type polyol (PP series, GP series), isocyanate (2,4-toluene diisocyanate) and hydroxy acrylate (hydroxypropyl methacrylate). We measured basic property including color, viscosity and refractive index of resulting urethane methacrylate. Also we measured tensile strength, elongation, and Young's modulus after photo curing. Photo curing speed was investigated using photo-DSC (TA instrument). In the case of similar polyol structure, as the molecular weight of polyol is increased, tensile strength, Young's modulus, curing rate were decreased, but elongation was increased. As the number of functionality of urethane methacrylate oligomer is increased, tensile strength, Young's modulus, curing rate were increased, but elongation was decreased.