• Elastomers and Composites
• /
• 제47권2호
• /
• pp.121-128
• /
• 2012

제대로 재활용되지 못하고 있는 폐 EPDM 즉, 자동차 Weather strip이나 세탁기 가스켓 등에서 재생한 폐EPDM 분말을 적합하고 경제성있는 Polyolefin계 Elastomer와 수지(Binder), 그리고 Filler 및 기타 첨가제를 선정하여, 다양한 배합조건으로 고무 복합소재를 압출 제조하였다. 본 실험에 유익한 기초 실험으로서, 폐 EPDM의 초음파처리 효과, 폐 EPDM복합소재의 폐타이어 복합소재와의 물성 비교, Virgin EPDM과 Devulcanized EPDM과의 비교, 그리고 12 축압출기로 압출한 재료의 물성에의 영향을 고찰하였다. 폐 EPDM을 이용하여 인조잔디 충전재와 카매트용 복합소재를 2 축압출기를 사용하여 압출한 후, 인장시편을 사출하여 인장강도, 신율, 경도의 세가지 물성을 주요 평가지표로 삼고 경제적인 배합처방을 개발하였다.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.246-255
• /
• 2023

In this study, we investigated for natural rubber foam to replace petrochemical-based neoprene foam. Experiments were conducted on vulcanization system and 2-step foaming process of natural rubber. The vulcanization system were EV(Efficient Vulcanization Cure), Semi-EV(Semi-Efficient Vulcanization Cure) and CV(Conventional Vulcanization Cure). In the 2-step foaming process, first molding temperature was 140℃, times were 15, 20, 25, and 30minutes, and the second molding temperature was 160℃, the times 5, 10, 15, and 20minutes. The cure and viscosity characterization were evaluated by oscillating disc rheometer (ODR) and mooney viscosmeter. Various mechanical characteristics, including hardness, tensile strength, elongation at the point of rupture, and tear strength, were quantified. Subsequently, an assessment of alterations in these mechanical attributes was conducted post-immersion in a NaCl solution. In addition degree of volume change was measured after immersing the NR foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. And expansion ratio and shrinkage ratio of NR foam were evaluated for 28 days. As a result the EV vulcanization system showed the least change in physical properties before and after salt water immersion, and the lowest shrinkage ratio for 28 days. In addition it was confirmed that the 2-step foaming optimum condition differed depending on the appropriate vulcanization condition.

• 접착 및 계면
• /
• 제23권1호
• /
• pp.8-16
• /
• 2022

본 연구에서는 폴리올의 혼합으로 폴리우레탄의 물성 저하를 보완하고자 하였다. 신발 및 소재 코팅용으로서 자가치유 기능을 가지는 수분산 폴리우레탄 수지를 합성하기 위해 내구성 및 내열성이 우수한 polyether 폴리올과 기계적 물성이 뛰어난 polycarbonate 폴리올을 병용하여 합성하였으며, 자가치유 기능의 부여를 위해 disulfide기를 도입하였다. 합성된 자가치유 기능 수분산 폴리우레탄은 fourier transform-infrared spectroscopy (FT-IR)을 통해 확인되었으며, universial testing machine (UTM)과 scanning electron microscope (SEM) 측정을 통해 물리적 특성 및 자가치유 특성을 확인하였다. Polycarbonate 폴리올을 병용함으로써 인장강도 및 경도가 증가하였고, 신장율은 감소하였다. 또한 열적 특성의 비교 결과, polycarbonate 폴리올의 함량이 증가함에 따라 열 안정성이 증가하였다. 치료효율은 poly(tetramethylene ether)glycol : polycarbonate polyol = 0.75 : 0.25일 때 가장 높은 효율을 보여주었으며, 현미경 및 SEM을 이용한 표면 관찰을 통해 손상 부분이 치유된 것을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1055-1062
• /
• 2022

In this study, the mechanical properties of 80% cold-rolled austenitic 316L stainless steel were evaluated using specimens subjected to reverse transformation at 500-750℃ for 20 minutes and reverse transformation at 700℃ for 2-60 minutes. Also, for the elastic wave obtained from the tensile test, the dominant frequency according to the reverse transformation condition was investigated by time-frequency analysis. The SEM image of the 80% cold-rolled material was transformed into martensite and showed line and cross shapes. The TEM image showed that line shapes were shown at the grain, and grain boundary of martensite. The higher the heat treatment temperature and the longer time, the larger the grain. Tensile strength decreased as the heat treatment temperature and time increased, but elongation increased. Hardness was proportional to tensile strength. This is because the grain with different directions showed the same direction due to reverse transformation. The dominant frequency was decreased and then increased as the temperature and time increased. This is because the direction of the grain is different at a low temperature and the same direction is shown at a high temperature.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.107-116
• /
• 2018

Simplification of the manufacturing process in shoe making is essential to improve productivity and reduce production costs. To improve the adhesion of EVA foam used as a midsole, EVA/itaconated EPDM(EPDM-g-IA)(80/20wt%) blend was prepared using Torque Rheometer-Plasti-Corder, and 1,6-hexamethylenediamine/crosslinking agent/foaming agent/additive were mixed, followed by amidation reaction and foaming to prepare EVA/EPDM-g-IA foam for shoe midsole. In this study, we investigate the effect of the content of 1,6-hexamethylenediamine(0, 0.5, 1.0, 2.0, 3.0) on the mechanical properties, water-contact angle and adhesion of EVA/itaconated EPDM foam. As the content of 1,6-hexamethylenediamine increased, mechanical properties such as tensile strength, tear strength, tensile elastic modulus, hardness, and water-contact angle were lowered, but elongation at break and compression set(%) were increased. Both normal type and non-UV type adhesive strength increased with increasing diamine content. In particular, it was found that the adhesion strength of the non-UV type adhesion increased sharply with increasing diamine content. As a result, an adherend rupture occurs in a foam sample having a content of 1,6-hexamethylenediamine of 3phr. From this, it can be seen that the EVA/itaconated EPDM foam for shoe midsoles, which can be used for non-UV adhesion without primer and UV treatments, have been developed.

• Elastomers and Composites
• /
• 제6권1호
• /
• pp.71-81
• /
• 1971

The intention of this study is to investigate the properties of polymer blend, NBR/PVC vulcanizates and blending procedures such as roll-mixing temperatures and sequences for polymer blending of NBR and PVC(resin type). The results obtained are as follows: 1. The roll temperature applied for polymer blending is around $150^{\circ}C$. At this temperature region, the degradation of rubber stock, which may be caused by heat, can be minimized and mill processing in practical application in industries can also be facilitated. 2. It is obviously necessary that a small amount of plasticizers should be added to the stock for improving processibility of roll mixing and physical properties. 3. On roll-mixing sequence, it is more effective that PVC compounded with plasticizer is added to NBR milled on hot roll. 4. The vulcanizates of the blends with different degree of polymerization of PVC ale similar to one another in properties. 5. NBR/PVC(70/30) blends shows the better physical characters than eve,-made foreign latex blend except abrasion-resistance. 6. As PVC addition ratio is increased, the physical properties such as resistance to ozone, tear, heat and oil and tensile strength, modulus, hardness have also improved, on the other hand, tension set and rebound character decreased. 7. The curve of ultimate elongation have point of inflection at the ratio of $30\sim40$ part of PVC. 8. While CR is blended, the physical properties such as brittle point, rebound and resistance to oil in high temperature have improved. 9. Polymer blend of NBR and domestic PVC is applied for the industrial utility such as rubber sole and heel, electric wire cover and oil-resistant packing, coating and gasket, printing roll, film for food packing etc.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.105-114
• /
• 2017

High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments using three different solvent dyes based on log P calculations. We evaluated the dyeing characteristics of dyed high tenacity polyethylene filaments based on dyeing temperature, dyeing time and concentration of solvent dyes. We also analyzed the tensile strength and elongation properties of dyed high tenacity polyethylene filaments with various dyeing temperature and dyeing times. The optimized dyeing condition can be found at $120^{\circ}C$ for dyeing time of 1 hour with 4%(o.w.f.) of solvent dyes.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.499-503
• /
• 2012

The present study is intended to comparatively investigate the changes in microstructure and tensile properties at room and elevated temperatures in commercial AM50(Mg-5%Al-0.3%Mn) and 0.3 wt%CaO added ECO-AM50 alloys produced by permanent mould casting. The typical microstructure of AM50 alloy was distinctively characterized using two intermetallic compounds, ${\beta}(Mg_{17}Al_{12})$ and $Al_8Mn_5$, along with ${\alpha}$-(Mg) matrix in an as-cast state. The addition of a small amount of CaO played a role in reducing dendrite cell size and quantity of the ${\beta}$ phase in the AM50 alloy. It is interesting to note that the added CaO introduced a small amount of $Al_2Ca$ adjacent to the ${\beta}$ compounds, and that inhomogeneous enrichment of elemental Ca was observed within the ${\beta}$ phase. The ECO-AM50 alloy showed higher hardness and better YS and UTS at room temperature than did the AM50 alloy, which characteristics can be mainly ascribed to the finer-grained microstructure that originated from the CaO addition. At $175^{\circ}C$, higher levels of YS and UTS and higher elongation were obtained for the ECO-AM50 alloy, demonstrating that even 0.3 wt%CaO addition can be beneficial in promoting the heat resistance of the AM50 alloy. The combinational contributions of enhanced thermal stability of the Ca-containing ${\beta}$ phase and the introduction of a stable $Al_2Ca$ phase with high melting point are thought to be responsible for the improvement of the high temperature tensile properties in the ECO-AM50 alloy.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.87-94
• /
• 2023

TMCP(Thermo Mechanical Control Process) steel was continuously cast (CC) by varying the argon gas flow rate and vacuum time in the Ruhrstahl Heraeus (RH) refining process. Using the CC specimens, the distribution of the inclusions and the mechanical properties were evaluated. A lot of oxides and Al-O type inclusions were observed. The average Vickers hardness did not show a constant, but showed dispersion in a certain range. The shape and scale parameters of the CC specimen with an argon gas flow rate of 160Nm³ and a vacuum time of 12 minutes was the best. Mechanical properties (tensile strength, yield strength and elongation) were consistent with the Weibull probability distribution analysis results. The impact resistance was the best for CC specimens with an argon flow rate of 140 Nm³ and a vacuum time of 12 minutes. Although the inclusions and mechanical properties of the CC specimens were evaluated according to the argon gas flow rate and vacuum time, these values were no significant difference.

• 폴리머
• /
• 제34권6호
• /
• pp.574-578
• /
• 2010

본 연구에서는 고리화합물인 카프로락톤으로부터 2-hydroxyethyl acylate(2-HEA)를 개시제로 사용하여 caprolactone modified hydroxy acrylate(CHA)를 합성한 후, hexamethylene diisocyanate trimer(HDT)와 축중합을 통해 카프로락톤 변성 우레탄 아크릴레이트(UA) 올리고머를 합성하였다. 카프로락톤과 2-HEA의 몰비에 따른 CHA의 분자량은 수산가를 이용하여 계산되었으며, 계산된 분자량은 이론분자량과 거의 일치하였다. UA 올리고머의 점도는 2-HEA 대한 CHA의 함량이 증가할수록 감소하는 경향을 보였다. UA 올리고머와 반응형 희석제를 광개시제와 함께 광경화한 후, 형성된 경화필름의 내열성 및 내열 변색성을 측정하였다. 경화필름의 가교밀도가 증가할수록 내열성 및 내열변색성이 우수하였으나 가교밀도가 증가할수록 경도는 증가하지만, 신율은 상대적으로 감소하였다.