• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.137-143
• /
• 2011

The pitch motion of a gravity-gradient satellite can be chaotic, depending on the ratio of mass moments of inertia and the eccentricity of the satellite orbit. For a precise prediction of motion, chaotic pitch motion has to be changed to non-chaotic motion. Feedback control can be used to obtain nonchaotic pitch motion. For chaos control and stabilization of the pitch motion of a gravity-gradient satellite, a feedback control system is designed, based on the linear nonautonomous system obtained by linearizing the nonlinear pitch motion. The control law obtained has two parameters and is applied to chaotic nonlinear pitch motion. The nonlinear control system satisfies the proposed control objectives in the range of the nonchaotic parameter space.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.575-581
• /
• 2013

In this paper, we experimentally investigated the effects of attached cylindrical tripwires on the aerodynamic performance. The research was carried out with a simple two-dimensional (2-D) rectangular airfoil fabricated from thin flat-plate aluminium, with elliptical leading and trailing edges. Tripwires of varying widths and thicknesses, and attack angles of $-5^{\circ}{\sim}20^{\circ}$ were used to investigate the aerodynamic characteristics (e.g. lift and drag forces) of the airfoil. We found that attaching the tripwires to the lower surface of the airfoil enhanced the lift force and increased the lift-to-drag ratio for low attack angles. However, attaching the tripwires to the upper surface tended to have the opposite effects. Moreover, we found that attaching the tripwires to the trailing edge had similar effects as a Gurney flap. The aerodynamic characteristics of the flat-plate airfoil with tripwires can be used to develop passive control devices for aircraft wings in order to increase their aerodynamic performance when gliding at low attack angles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.879-886
• /
• 2006

In this paper, we proposed an advanced authentication structure for reducing the certificate acquisition time which is one of the factors that should be improved in a conventional wireless PKI. A conventional key exchange method simply performs the key exchange setup step based on discrete algebraic subjects. But the mutual-authentication procedure of wireless PKI for reducing authentication time uses an elliptical curve for a key exchange setup step. We simulated and compared the authentication structure proposed by Sufatrio, K. Lam[4] and the our authentication structure in terms of the authentication time. Simulation results show that the proposed method reduces the authentication time comparing to the conventional wireless PKI authentication method.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.699-704
• /
• 2008

By the dependence on Web from popularization of internet and increasing number of users, web services capability and security problem of communication is becoming a great issue. Existing web services technology decrease the capability of web application server by limiting the number of synchronous client, decreasing the processing load and increasing average response time. The encryption process to secure communication and the early expense of handshake decrease transmission speed and server capability by increasing the calculation time for connecting. Accordingly, this paper executes an encryption procedure by elliptical encryption algorithm to satisfy secure demands, improve the overload of server for web services and get reliability and security of web server architecture and proposes an improved mobile web sever which provides better ability and the techniques for deferred processing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.274-275
• /
• 2006

A linear ultrasonic motor was designed by a combination of the longitudinal and bending mode. Linear ultrasonic motors are based on an elliptical motion on the surface of elastic body, such as bar or plates. The corresponding eigen-mode of one resonance frequency can be excited twice at the same time with a phase shift of 90 degrees in space and time. That is excite symmetric and anti-symmetric modes. Then it determines the thrust and speed of the motor. Linear ultrasonic motors are investigated experimentally in according to be fabricated a general classification to motor structure and material characteristic. There was the first to simulate as use of finite element analysis ANSYS 9.0. The AL-T2W8-ARM14-LEG18-ANGLE80 motor has a maxim efficiency 17 [%] under the speed 0.14 [m/s], thrust 345 [gf] and preload 280 [gf], operating frequency is 57.6 [kHz].

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.113-119
• /
• 2008

A series of amphiphilic dendrons n-18 (n: generation number, 18: octadecyl chain) based on an aliphatic polyether denderitic core and octadecyl peripheries were synthesized using a convergent dendron synthesis consisting of a Williamson etherification and hydroboration/oxidation reactions. This study investigated their thermal and self-assembling behavior in the solid state using differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) absorption spectroscopy, and small angle X-ray scattering (SAXS). DSC indicated that the melting transition and the corresponding heat of the fusion of the octadecyl chain decreased with each generation. FT-IR showed that the hydroxyl focal groups were hydrogen-bonded with one another in the solid state. DSC and FT-IR indicated microphase-separation between the hydrophilic dendritic cores and hydrophobic octadecyl peripheries. SAXS data analysis in the solid state suggested that the lower-generation dendrons 1-18 and 2-18 self-assemble into lamellar structures based upon a bilayered packing of octadecyl peripheries. In contrast, the analyzed data of higher-generation dendron 3-18 is consistent with 2-D oblique columnar structures, which presumably consist of elliptical cross sections. The data obtained could be rationalized by microphase-separation between the hydrophilic dendritic core and hydrophobic octadecyl peripheries, and the degree of interfacial curvature associated with dendron generation.

• Journal of Chest Surgery
• /
• v.47 no.3
• /
• pp.283-286
• /
• 2014

A 61-year-old man was diagnosed with aortic stenoinsufficiency with periannular abscess, which involved the aortic root of noncoronary sinus (NCS) that invaded down to the central fibrous body, whole membranous septum, mitral valve (MV), and tricuspid valve (TV). The open complete debridement was executed from the aortic annulus at NCS down to the central fibrous body and annulus of the MV and the TV, followed by the left ventricular outflow tract reconstruction with implantation of a mechanical aortic valve by using a leaflet of the half-folded elliptical bovine pericardial patch. Another leaflet of this patch was used for the repair of the right atrial wall with a defect and the TV.

• Tribology and Lubricants
• /
• v.28 no.5
• /
• pp.197-202
• /
• 2012

In this study, with the purpose of fundamentally improving the unbalance response vibration of a large PRT motor-generator rotor by design, a performance improvement design analysis is carried-out by retrofitting tilting pad bearings, replacing the plain partial journal bearings that were originally applied for operation at a rated speed of 1,800 rpm. In this process, a goal of the design analysis is to obtain a design solution for maximizing the direct stiffness of the bearings while satisfying the key basic lubrication performance requirements such as the minimum lift-off speed and maximum oil-film temperature. The results show that with a careful design application of tilting pad journal bearings for operation at such a relatively low speed of 1,800 rpm, direct stiffness increment of the bearings by about two times can be effectively achieved. Prevention of pad unloading is also considered in the analysis. Moreover, the designs of elliptical and offset half journal bearings are also analyzed and reviewed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.653-659
• /
• 2002

This paper describes a probabilistic fracture mechanics(PFM) analysis based on Monte Carlo(MC) simulation. In the analysis of CANDU pressure tube, the depth and aspect ratio of an initial semi-elliptical surface crack, a fracture toughness value and delayed hydride cracking(DHC) velocity are assumed to be probabilistic variables. As an example, some failure probabilities of piping and CANDU pressure tube are calculated using MC method with the stratified sampling MC technique, taking analysis conditions of normal operations. In the stratified MC simulation, a sampling space of probabilistic variables is divided into a number of small cells. For the verification of analysis results, a comparison study of the PFM analysis using other commercial code is carried out and a good agreement was observed between those results.

• Parasites, Hosts and Diseases
• /
• v.49 no.3
• /
• pp.323-326
• /
• 2011

While the presence of pinworm eggs in archaeological samples has been reported by many researchers in the New World, those have been detected very scarcely in the Old World, especially in East Asian countries. In fact, many parasite species were recovered from the archeological remains in Korea, eggs of Enterobius vermicularis had not been found. Recently, a female mummy buried in the 17th century was discovered in the Joseon tomb from Dangjin-gun, Chungcheongnam-do, Korea. After rehydration process for 12 days, investigations were carried on the luminal surface of the colon. From them, 3 eggs of E. vermicularis were recovered. They were elliptical, transparent with a thin egg shell, $50.3{\pm}5.2\;{\mu}m$ (length) and $28.2{\pm}3.9\;{\mu}m$ (width) in size. This is the first discovery of E. vermicularis eggs in East Asia.