• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.171-186
• /
• 2009

Various Earth-Moon transfer trajectories are designed and analyzed to prepare the future Korea's Lunar missions. Minimum fuel trajectory solutions are obtained for the departure year of 2017, 2020, 2022, and every required mission phases are analyzed from Earth departure to the final lunar mission orbit. N-body equations of motion are formulated which include the gravitational effect of the Sun, Earth and Moon. In addition, accelerations due to geopotential harmonics, Lunar J2 and solar radiation pressures are considered. Impulsive high thrust is assumed as the main thrusting method of spacecraft with launcher capability of KSLV-2 which is planned to be developed. For the method of injecting a spacecraft into a trans Lunar trajectory, both direct shooting from circular parking orbit and shooting from the multiple elliptical intermediate orbits are adapted, and their design results are compared and analyzed. In addition, spacecraft's visibility from Deajeon ground station are constrained to see how they affect the magnitude of TLI(Trans Lunar Injection) maneuver. The results presented in this paper includes launch opportunities, required optimal maneuver characteristics for each mission phase as well as the trajectory characteristics and numerous related parameters. It is confirmed that the final mass of Korean lunar explorer strongly depends onto the initial parking orbit's altitude and launcher's capability, rather than mission start time.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.188-195
• /
• 1997

Copper ions were adsorbed on amorphous Si films by spincoating of Cu solutions and were employed as surface nucleation sites for low-temperature crystallization. The crystallization temperature can bc lo~vered down to $500^{\circ}C$ and rhe crystallization time can be shortened by Cu adsorption. The Cu-adsorbed amorphous films were crystallized by fractal growth with the shape of tree branches. The fractal size ranged from $30 to 300{\mu}m$, depending on the Cu solution concentration. The fractals consisted of f e a t h e r like elliptical grains with the size of $0.3~0.4{\mu}m$. which was comparable to that of the intrinsic films crystallized at $600^{\circ}C$. Both the nucleation activation energy and grotvth activation energy decreased as the Cu concentration in the solution increased. The results suggest thcit the adsorbed Cu increases preferred nucleation sites at the surface and enhmces crystallization by reducing thc activation energies of nucleation and growth.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.69-74
• /
• 2006

Basal rot of freesia caused by a Sclerotium sp. occurred at Incheon areas. Incidence of the disease reached up to 45% and averaged 17.0% in the fields. Typical symptoms consisted of sheath dry and leaf blight due to rots on basal leaves. The causal fungus was identified as Sclerotium sp. based on following mycological characteristics. The fungus formed sclerotia on cultural media and plant tissues, but did not produce asexual spores. On cultural medium, aerial mycelia of the fungus changed color from white to clay with cultural age and smelled musty odor. Numerous irregular and elliptical black microsclerotia of the fungus were formed on potato dextrose agar (PDA) after 5 days of incubation at $25^{\circ}C$ and sized $115{\sim}200{\times}95{\sim}150 (av. 145{\sim}126.5){\mu}m$. The fungus grew at $10{\sim}32^{\circ}C$ and $pH 4.0{\sim}8.5$. However, the optimal temperature and pH for mycelial growth of the fungus were $24^{\circ}C$ and 5.5 respectively. The isolate showed present pathogenicity to not only freesia but gladiolus in the pathogenicity test, and the symptoms were similar to those observed in the fields. Basal rot of freesia caused by Sclerotium sp. is firstly reported in Korea.

• Parasites, Hosts and Diseases
• /
• v.57 no.6
• /
• pp.657-664
• /
• 2019

We identified the echinostome metacercariae in Chinese mystery snails, Cipangopaludina chinensis malleata, from Xiengkhuang Province, Lao PDR with morphologies of adult worms recovered. Total 20 snails were examined with artificial digestion method and then the collected metacercariae were orally infected to a mouse and a rat. Adult worms recovered from experimental animals were observed with a light microscope and a SEM. The metacercariae were round, 125×123 ㎛ in average size, with a moderately thick cyst wall, collar spines distributed in the head collar and excretory granules in 2 canals of excretory tube. Adult flukes (3-week-old in a rat) were elongated, ventrally curved and 5.310×1.023 mm in average size. Head collar distinct, bearing 43 collar spines with 5 end group ones on each side. Oral sucker subterminal, prepharynx very short, pharynx well developed, and esophagus relatively short. Cirrus sac well developed, with a saccular seminal vesicle, and ventral sucker very large. Ovary round and on the median line of the body. Testes tandom and elongated. Eggs operculated, elliptical and 90×57 ㎛ in average size. In the SEM observation, the head crown prominent, with 43 collar spines resembled with horns of younger stag. Scale-like tegumental spines were densely distributed on the surface between the head collar and ventral sucker, and their densities were decreased posteriorly. Conclusively, the metacercariae detected in C. chinensis malleata from Lao PDR were identified as those of Echinostoma macrorchis based on the morphological characteristics of adult worms.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.152-163
• /
• 1994

The characteristics and fluctuations of structures and spatial distributions of warm eddies (anticyclonic eddies) in the southwestern part of the East Sea (the Japan Sea) are discussed based on the data gathered y the Fisheries Research and Development Agency, Korea from 1967 to 1968. The warm eddies existed very often in the southwest of the Ullung Island. The warm eddies are elliptical in shape and the mean size is about 130 km in diameter. Bimonthly distributions of warm eddies, the largest value of observed frequency and diameter in August and the least in June, indicate that the generation of the warm eddy is related with the development of the East Korean Warm Current. The warm eddies move west, north or southward with 0.80∼2.50 cm/sec or stay over a few months at the same place southwest of the Ullung Island. Movement of warm eddies may be influenced by the neighboring currents, the Rossby wave and the topography. The relationship between the position of warm eddies and the bottom topography suggests that the development and the movement of warm eddies are controlled by the Ullung Basin. The warm eddies should be divided into two groups. One group is the shallow warm eddy with strong baroclinic characteristics and the other is the deep one with strong Barotropic characteristics. The shallow group seems to be closely related with positive values (in summer) of the sea level difference between Pusan and Mozi (the Tsushima Current), while the deep group has no relation with that.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.62-65
• /
• 2010

This study was carried out to estimate the size and exine pattern of pollen grains in seven species of the genus Lilium by using scanning electron microscope. Exine of pollen grains, which were all monad, took the prolate forms with a pollen aperture. However, there were various L/W ratio between length (L) and width (W) of pollen grains among selected Lilium species. The pollen of L. distichum was oblong shape which had the highest L/W ratio of 2.59. On the other hand, that of L. concolor var. partheneion was broadly elliptical shape close to circle which had the lowest L/W ratio of 1.82. The surface patterns of exine were reticulate in all Lilium species that have showed diverse forms in their lumina. Pollen length and width in L. lancifolium had the greatest value, 115.90 and $46.54{\mu}m$, respectively, in comparison with those of L. tsingtauense, 70.33 and $38.72{\mu}m$, respectively. Except L. distichum and L. leichtlinii var. maximowiczii which had a similar pollen length within standard errors, the others in Lilium species showed different sizes, respectively. Therefore, these results indicated that pollen length could be a better standard for the classification of Lilium species than exine surface patterns or pollen dissection area.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.107-114
• /
• 2019

In many military aircraft, s-shaped diffusers are used to prevent the fan blades of the turbofan engine from being exposed to the outside. The inlet configurations of the air intakes for military aircraft vary, such as the rectangular intake of the F-22, the crescent-like intake of the F-16, elliptical intake of the MQ-25. In this study, the aerodynamic performance of s-shaped diffusers with various inlet configurations was evaluated using numerical analysis. In addition, the configuration of the middle section of an s-shape duct was changed to the crescent shape, and the effects on its aerodynamic performance were investigated. As a result, there was a slight difference in total pressure recovery according to various inlet configurations with ellipse-shaped middle sections. Also, the total pressure distortion was the lowest in the rectangular inlet shape. When the configuration of the middle section was changed from an ellipse to a crescent shape, the total pressure recovery remained at a high level, except for the ellipse-shaped inlet configuration. In terms of total pressure distortion, the duct with the crescent-shaped middle section showed a significantly more uniform pressure distribution than that with the ellipse-shaped middle section.

• Korean Journal of Plant Taxonomy
• /
• v.34 no.3
• /
• pp.245-264
• /
• 2004

For nine taxa of the genus Carex which consist of C. arenicola, C. chordorhiza, C. curta, C. gibba, C. laevissima, C. leiorhyncha, C. neuromrpa, C. maakii and C. remouscula with mixed pistillate and staminate flowers, morphological characters such as inflorescense, spikelet, inflorescence bract, utricle, pistillate and staminate scales, achene, length between two spikelets were observed to find useful characters for their identification. Especially, the shape and the number of spikelet were very useful characters to divide the treated nine taxa into two groups, the their keys were prepared. The first group was comprised of five species of C. arenicola, C. chordorhiza, C. curta, C. gibba, and C. remouscula, which were characterized by broadly oboval or narrowly elliptical shape of spikelet, and 3-9 spikelets per infIorescence and gradual decrease in length between two spikelets. The second group was composed of four species of C. laevissima, C. leiorhyncha, C. neurocarpa, C. maakii, which were distinguished by oval shape of spikelet, and 17-20 spikelets per infIorescence and repetition of increase.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.68-77
• /
• 2013

This report is based on the investigation of potholes which are formed by fluvial erosion. A pothole is called so because it is a hole that looks like a coffeepot. The results of previous studies are applied to the 'Jakgwaecheon Porthole' of this study. The study is focused on the dimension and morphology of the Pothole and investigates the effects of stream sediments, river flow, geological structural lines, etc. on the formation of potholes. As a result of measuring 61 potholes in this area, we recognized that the elliptical dish-shaped cross sections are dominant and inferred that their longitudinal direction on the plain is affected by the direction of the stream flow. Also, 'Jakgwaecheon Pothole' is very characterized in terms of scale and morphology. Furthermore, it is harmonious with the beautiful landscape, humanity, and historical values and it can be suggested that it is qualified to be registered as a geoheritage structure.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.107-116
• /
• 2020

The compaction grouting technique is widely used to improve the liquefaction resistance of loose sands that are liquefaction-prone. Particularly, the horizontal injection of compaction grout is proposed for the liquefiable ground with an overlying structure as it does not allow the vertical compaction grouting. However, there has been limited number of researches on the horizontal compaction grouting. Therefore, this study explores the grout bulb shape and expansion direction in loose sand. A series of scaled two-dimensional experiments on the horizontal compaction grouting was conducted varying the overburden stress. The results show that the grout bulb grows in an elliptical shape though its directivity of major axis changes with the overburden effective stress and relative density. The grout bulb expands faster in a horizontal direction under a low overburden stress with a small relative density. The higher overburden stress and the greater relative density cause the more circular shape with the faster expansion in a vertical direction. The presented finding is expected to contribute to accurate and efficient design of the horizontal compaction grouting method.