• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.168-172
• /
• 2008

A new peanut variety "Charmpyeong" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2007. It was developed from the cross between the high-yielding cultivar "Shindaekwang" and the very short stem cultivar "ICGV94216". This Virginia plant typed "Charmpyeong" has 33 cm stem height and 18 branch number Each pod with ellipse-shaped large kernel has two grains with brown testa and 100 seed weight was 88 g in the regional yield trials (RYT). This variety also showed more resistant to web blotch compared with check one. Especially it has resistance to lodging until harvesting owing to short stem. In the regional yield trials "Charmpyeong" was outyielded than check variety by 13% with 4.35 MT/ha for grain.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.58-62
• /
• 2008

A new vegetable peanut cultivar "Charmwon" (Arachis hypogaea ssp. fastigiata.L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang 2006. It was developed from the cross between the disease resistant cultivar "HYQ(CG)S-10" and the high-yielding cultivar "Sinkwang". "Charmwon" which has been classified as Shinpung plant type is less branch number with early flowering and ellipse-shaped large kernel. Each pod which showed very shallow constriction had two grains with red testa and 100 seed weight was 90g in the regional yield trials (RYT). This variety also showed higher free sugar and protein contents in seed quality, and had more resistant to early and late leaf spot diseases compared with check one. In the regional yield trials "Charmwon" was out-yielded than check variety by 18% with 8.93 ton/ha for fresh pod and by 4% with 3.95 ton/ha for grain.

• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.224-229
• /
• 2017

A new peanut variety 'Daan'(Arachis hypogaea ssp. hypogaea L.) was developed at the Department of Southern Area Crop Science, National Institute of Crop Science (NICS) in Milyang 2014. This was developed from the cross between 'Iksan 31' with Virginia typed short stem and 'Dakwang' with Shinpung-typed larger grain. 'Daan' which is a Shinpung plant type had 13 branches per plant and its length of main stem was 44cm. Each pod has two grains with brown testa and long ellipse-shaped large kernel. Its yield components showed 34 pods per plant, 127 g of 100-seed-weight and 75% of pod shelling ratio in the regional yield trials (RYT). Seed quality showed 47.8% of crude oil and 28.3% of protein content. This variety showed resistant to early leaf spot and had more resistant to late leaf spot, stem rot and lodging, compared to reference variety. In the regional yield trials for 3 years 'Daan' was more productive than reference variety by 16% with 5.00 MT/ha for grain production.

• Clean Technology
• /
• v.27 no.2
• /
• pp.146-151
• /
• 2021

Pure and Sm ion doped BiVO₄ catalysts were synthesized using a conventional hydrothermal method and characterized by XRD, DRS, SEM, and PL. We also examined the activity of these materials on the photocatalytic decomposition of rhodamine B under visible light irradiation. The doping of Sm ion into BiVO₄ catalyst changed the ms-BiVO₄ crystal structure into the tz-BiVO₄ crystal structure in the low synthesis temperature. Light absorption analysis using DRS showed that all the catalysts displayed strong absorption in the visible range of the electromagnetic spectrum regardless of Sm ion doping. In addition, an amorphous morphology was shown in the pure BiVO₄ catalyst, but the morphology of the BiVO₄ catalyst doped with Sm ion was changed into an ellipse shape and also the particle size decreased. In the photocatalytic decomposition of rhodamine B, Sm ion doped BiVO₄ catalyst showed higher photocatalytic activity than the pure BiVO₄ catalyst. In addition, the Sm3-BVO catalyst doped with 3% Sm ion showed the highest photocatalytic activity, as well as the highest formation rate of OH radicals (•OH) and the highest PL peak. This result suggests that the formation rate of OH radicals produced in the interface between the photocatalyst and water is well correlated with the photocatalytic activity.

• Journal of Naturopathy
• /
• v.10 no.1
• /
• pp.26-32
• /
• 2021

Purpose: At acupoint pressure, the pressing direction of all acupoints is usually vertical. However, it is not clear whether the vertical direction is toward the belly button or the body's center in the BL52. In this study, the effective direction of acupressure was studied by measuring the pressure pain threshold according to the direction of acupressure in 30 subjects. Methods: The distance from the subject's GV4 to the left and right BL52 and the distance from GV4 to the navel were measured, and then using the ellipse where the left and right BL52 of GV4 pass through the navel, the angles of the navel direction and the body's center were calculated in the left and right BL52. The pressure at the time when the subjects felt pain while pressing the BL52 in two directions was used as the acupressure pain threshold. The pain threshold was measured 3 times at 3 minute intervals on the left and right BL52s of the subject. Results: The acupressure pain threshold measured in the left and right BL52 of the subjects was significantly decreased when pressed toward the trunk center (p < .05). In BL52, it was more sensitive to pressure when the direction of pressure is toward the body's center. Conclusions: Acupressure therapy of acupoint is more sensitive to external stimuli than the surrounding. In this study, acupressure directed toward the trunk center is more efficient than toward the belly button in BL52.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.2
• /
• pp.95-103
• /
• 2024

The global increase in population and subsequent scarcity of terrestrial living spaces necessitates exploration of alternative habitats. Research into the development of underwater living areas provides promising avenues for the expansion of human living spaces and the use of marine environments. This study focuses on the failure envelope of suction caisson foundations subjected to combined loads in a marine setting, utilizing finite element analysis. The foundation is assumed to be embedded in clay characterized by a linear increase in undrained shear strength with depth, employing the von Mises constitutive model for the clay. The resulting failure envelope is represented as a tilted ellipse which expands as the undrained shear strength increases, maintaining a constant ratio between the major and minor axes. A comparative analysis of two suction caisson foundations with varying length-to-diameter ratios revealed that this ratio influences the dimensions of the failure envelope, with a tendency for the major-to-minor axis ratio to increase as the length-to-diameter ratio increases. These findings are critical for the design of suction caisson foundations in offshore environments.

• Journal of Korean Society of Forest Science
• /
• v.52 no.1
• /
• pp.1-30
• /
• 1981

The origin and development of adventitious roots was studied using hypocotyl and epicotyl cuttings of 34 species, 24 genus of woody plants. These cuttings obtained from young seedlings cultured in vials containing distilled water only. The several characteristics of cuttings materials studied are shown in Table 1. The results are summerized as follows: 1. The circumference shapes of cross-sections of hypocotyl and epicotyl cuttings can be divided into six categories, namely, round, irregular round, ellipse, irregular ellipse, square, and triangle. Species differences within a genus did not show any difference of hypocotyl and epicotyl cross-sections shape, however, a noticeable variation among genus or higher taxa. 2. The arrangements of vascular bundles in the cross-sections of hypocotyls or epicotyls were almost all collateral types and generally showed generic characteristics differing one to the other. However, there were some variations between species within the genus. Six models of vascular bundle arrangement were proposed for all the above speices. 3. The rooting portions of hypocotyl and epicotyl cuttings in this experimental materials can be grouped as follows: (1) Interfascicular parenchyma; (Thuja orientalis. T. orientalis for. sieboldii, Acer microsieboldianum, A. palmatum, A. saccharinum, Cercis chinensis, Lespedeza bicolor, Magnolia obovata, M. sieboldii, Mallotus japonicus, Staphylea bumalda) (2) Cambial and phloem parenchyma: (Chamaecyparis obtusa, C. pisifera, Albizzia julibrissin, Buxus microphylla var. Koreana, Cereis chinensis, Euonymus japonica, Firmiana platanifolia, Lagerstroemia indica, Ligustrum salicinum, L. obtusifolium, Magnolia kobus, M. obovata, Mallotus japonicus, Morus alba, Poncirus trifoliata, Quercus myrsinaefolia, Rosa polyantha, Styrax japonica, Styrax obassia) (3) Primary ray tissues; (Euonymus japonica, Styrax japonica) (4) Leaf traces; (Quercus acutissima, Q. aliena) (5) Cortex parenchyma; (Ailanthus altissima) (6) Callus tissues; (Castanea crenata, Quercus aliena, Q. myrsinaefolia, Q. serrata) 4. As a general tendency throughout the species studied, in hypocotyl cuttings, the adventitious root primordia were originated from the interfascicular parenchyma tissue, however, leaf traces and callus tissues were contributed to the root primordia formation in epicotyl cuttings. The hypocotyl cuttings of Ailanthus altissima exhibited a special performance in the root primordia formation, this means that cortex parenchyma was participated to the origin tissue. And in Firmiana platanifolia, differening from the other most species, the root primordia were formed at the phloem parenchyma adjacent outwardly to xylem tissue of vascular bundle system as shown photo. 48. 5. All the easy-to, or difficult-to root species developed adventitious roots in vials filled with distilled water. In the difficult-to-root species, however, root formations seemed to be delayed because they almost all had selerenchyma or phloem fiber which gave some mechanical hindrance to protrusion of root primordia. On the other hand, in the easy-to-root species they seemed to form them more easily because they did not have the said tissues. The rooting portions between easy-to-root and difficult-to-root species have not clearly been distinguished, and they have multitudinous variations. 6. The species structured with the more vascular bundles in number compared with the less vascular bundles exhibited delayed rooting. In the cuttings preparation, the proximal end of cuttings was closer to root-to-stem transition region, the adventitious root formation showed easier. 7. A different case occured however with the mature stem cuttings, in both the needle-leaved and the broad-leaved species. In the hypocotyl cuttings, parenchymatous tissues sited near the vascular bundles become the most frequent root forming portions in general and relevant distinctions between both species were hardly recognizable. 8. In the epicotyl cuttings, root primordia originated mainly in leaf traces in connection with cambial and phloems or callus tissues itself. In the hypocotyl cuttings, interfascicular parenchyma was the most frequent portion of the root primordia formation. The portions of root primordia had more connection with vascular cambium system, as the tissues were continuing to be developed.

• Journal of KIISE:Software and Applications
• /
• v.30 no.9
• /
• pp.829-842
• /
• 2003

In this Paper, we propose the new face detection and tracking method based on template matching for real-time applications such as, teleconference, telecommunication, front stage of surveillance system using face recognition, and video-phone applications. Since the main purpose of paper is to track a face regardless of various environments, we use template-based face tracking method. To generate robust face templates, we apply wavelet transform to the average face image and extract three types of wavelet template from transformed low-resolution average face. However template matching is generally sensitive to the change of illumination conditions, we apply Min-max normalization with histogram equalization according to the variation of intensity. Tracking method is also applied to reduce the computation time and predict precise face candidate region. Finally, facial components are also detected and from the relative distance of two eyes, we estimate the size of facial ellipse.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.2
• /
• pp.119-125
• /
• 1974

When the nomal silkworms reached active time of 3rd instar stage both non-moulting larva and normal silkworms from the same rearing tray were collected and fixed. The silkworms in 4th instar stage whose growth was as dwarfish as those in 1st and 2nd instar stages were also collected and fix with the normal silkworms. Non-moulting larva and normal silkworms were morphologically compared and the examined results from the tissue inspection are summarized as follows： 1. In spite of the fact that the normal silkworms reached the active eating time of 3rd instar stage non-moulting silkworms were dwarfish as if they had been reared for two days. Non-moulting silkworms which were observed at the time of 4th instar stage showed no much difference in their growth. 2. There was the tendency that the exuvial gland as was shown in Fig. 1 and 2 was flat cyslidium of ellipse and its size at thorax was small shile the gland at abdomen was big. 3. The exuvial gland at thorax has been reported to be bigger at thoracic base than at dorsal vessel but according to the present it was examined to be irregular. 4. The size of exuvial gland of silkworms in the active eating stage of 3rd instar was from 151.3${\mu}$ (major axis) to 94.5${\mu}$ (minor axis) at prothorax and from 568.6${\mu}$ (major axis) to 495.1${\mu}$ (minor axis) at 7th abdominal segment. The sire oe exuvial gland of non-moulting silkworm was 57.5${\mu}$ (major axis) to 51.3${\mu}$ (minor axis) at prothorax and from 91.5${\mu}$ (major axis) to 75.5${\mu}$ (minor axis) at 5th abdominal segment (see Fig. 1) 5. When the normal silkworms reached 4th instar active eating stage its exuvial gland was compared to that of dwarfish silkworm. The result was that the size of normal silkworm at prothorax was from 252.2${\mu}$ (major axis) to 131.6${\mu}$ (minor axis) and the size of exuvial gland at 7th abdominal segment was from 691.5${\mu}$ (major axis) to 493.4${\mu}$ (minor axis) while the sire of exuvial gland of non-moulting at prothorax was from 71.4${\mu}$ (major axis) to 61.5${\mu}$ (minor axis) and the size of the non-moulting silkworm's 8th abdominal segment was from 94.6${\mu}$ (major axis) to 71.5${\mu}$ (minor axis) (See Table 2) 6. There was a remarkable difference in the from of exuvial gland of non-moulting silkworm. The size of alveolar of the non-moulting silkworm was many times larger compared to that of normal silkworm 7. There was no great difference between secretory cells of normal and non-moulting silkworms but the granular type exuvial gland was small in sire compared to that of normal silkworm.

• Progress in Medical Physics
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2011

For overall system test, hidden-target test have been used using film which leads to inherent analysis error. The purpose of our study is to quantify this error and to propose gel dosimeter based verification technique for 3-dimensional target point error. The phantom was made for simulation of human head and this has ability to equip 10 gel-dosimeter. $BANGkit^{TM}$ which we are able to manufacture whenever it is needed as well as to easily change the container with different shapes was used as a gel dosimeter. The 10 targets were divided into two groups based on shapes of areas with a planned 50% isodose line. All treatment and analysis was performed three times using Novalis and $BrainSCAN^{TM}$. The target point error is $0.77{\pm}0.15mm$ for 10 targets and directional target point error in each direction is $0.54{\pm}0.23mm$, $0.37{\pm}0.08mm$, $0.33{\pm}0.10mm$ in AP (anterior-posterior), LAT (lateral), and VERT (vertical) direction, respectively. The result of less than 1 mm shows that the treatment was performed through each precise step in treatment procedure. In conclusion, the 3-dimensional target point verification technique can be one of the techniques for overall system test.