• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.777-778
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.829-830
• /
• 2011

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.145-151
• /
• 2019

In this study, the effects were analyzed by applying the vibration absorption liner into the guide rail bracket as a part of method to reduce the vibration and noise on the high-rise apartment. As the result of vibration absorption liner performance, it was checked that the level of vibration and noise was reduced around 65.49% in the car side and around 90.05% in the counterweight side. Therefore, the vibration absorption effect by the vibration absorption liner of elevator guide rail bracket became fairly good. In case of the vibration absorption liner application, there was an effect on the reduction of 7.26 to 22.22% at hoistway section area, 3,840,000 to 9,780000 KRW at the cost of material and installation by comparing with the damping beam application. Also, in case of the vibration absorption liner application with light weight instead of damping beam with heavy weight, it was thought to become significant effect at preventing the safety from the accidents on installation site.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.402-403
• /
• 2012

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.6-9
• /
• 1993

본 연구에서는 엘리베이터 용량, 속도, 제어방식, 아파트 건설공법(현장타설공법 및 조립식공법), 승강로의 벽 및 천장구조 등 여러 요인별로 현장에서 엘리베이터 운행시 소음.진동량을 실측하고 문제점을 파악한 후, 현형 설계여건을 고려하여 PC구조아파트에 적용할 수 있는 효과적인 저감공법을 제시하였다.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.358-367
• /
• 2017

This paper presents a novel filtering method for speed measurements to improve the low-speed performance of the direct-drive permanent magnet traction machines for elevators. Based on the theory of nonlinear tracking differentiator (NTD), this method, which can act as a high performance filter of a raw speed signal, obtains a more accurate speed feedback signal when applying a low-resolution encoder. In addition, it can relieve the interference caused by the position derivative for speed sampling. By analyzing the frequency response of the NTD, the influence of its parameters on the performance of the speed filtering is investigated. Compared with different types of low-pass filters, the proposed method shows a shorter time delay and a stronger ability in terms of noise suppression when the parameters are selected carefully. In addition, when using the measured speed signal through a nonlinear tracking differentiator as the feedback of the system, the motor runs more steadily at low speeds. As a result, the riding comfort of a direct-drive elevator can be improved. The feasibility of the proposed strategy was verified on an 11.7kW elevator traction machine using a commercial inverter.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.606-608
• /
• 1994

This paper presents a low speed (1m/sec) elevator controller with a IGBT inverter (9.5KW). The major engineering problems of this development are noise suppression, thermal-dissipation and reliability improvement. The characteristic marks of this elevator are a single board controller, 40% reduced component, 40% reduced cubic content, EMI filter, vector controlled IGBT inverter.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2159-2161
• /
• 1997

This paper presents the investigations and the reduction methods for EMI in the Elevator(E/L) system. In the large capacity E/L. Power factor controlled IGBT converter is used, so that the conducted EMI level is mostly determined by a high frequency input current. We suggest the low cost EMI countermearsure for E/L system using by a LCL filter ed a low cost noise filter.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.95-98
• /
• 1995

공동주택의 침실, 거실 등은 가족의 휴식처로서 매우 정숙한 환경을 필요로 한다. 최근에 많이 건설되고 있는 고층아파트에는 고속엘리베이터가 설치되고 공간절약 및 구조적 기능 등으로 인하여 엘리베이터통로가 침실이나 거실에 인접한 설계가 많이 채택되고 있다. 이러한 고층아파트의 엘리베이터 기계실 인접 세대에서는 엘리베이터 가동에 의한 공기전달음 및 고체전달음이 문제가 될 수 있으며 특히 암소음이 매우 적은 야간의 엘리베이터 소음은 수면방해 및 집중력저하를 일으켜 입주자들의 불만이 야기될 수 있다. 본 연구에서는 입주완료후 엘리베이터 소음이 문제가 된 아파트에서 소음발생원인을 측정분석하고 주로 문제가 되는 고체전달음을 저감시키기 위한 엘리베이터 방진대책을 실시하여 그 성능을 확인하고 이 대책안을 문제가 되는 기존아파트나 추후 건설될 아파트의 엘리베이터 소음저감대책으로 제시하고자 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.359-365
• /
• 2008

As housing supply ratio has become over 100%, the strategic vision of government's policies has been changed from new construction to maintenance and regeneration of old architectural-structures. This fact has brought a light on the reconstruction and remodeling industries and a need for retrofit and rehabilitation techniques of existing foundation. Various methods of foundation for architectural-structures do exist. Among them, micropiling technologies are increasingly applied in foundation rehabilitation and seismic retrofitting projects. Micropiling techniques provide environmental-friendly methods for minimizing disturbance to adjacent structures, ground, and the environment. The installation is possible in restrictive area and general ground conditions. The fact that the installation procedures cause minimal vibration and noise and require very low ceiling height makes the micropiling methods to be commonly used for underpin existing structures. Specialized drilling equipment is often required to install the micropiles for existing basement facilities. This paper presents a case study in which micropiles were constructed to support a superstructure for vertical extension of existing elevator core and provide accessibility to underground parking lot. It is intended to become useful reference for the similar remodeling project.