Browse > Article
http://dx.doi.org/10.15207/JKCS.2019.10.8.145

An Analysis on the Effect of Application on Vibration Isolation Liner of Elevator Guide Rail Bracket  

Roh, Seung-Kwon (Thyssen Krupp Elevator Korea)
Kim, Eundo (The One Science)
Oh, Jong-Seok (Division of Mechanical & Automotive Engineering, Kongju National University)
Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
Publication Information
Journal of the Korea Convergence Society / v.10, no.8, 2019 , pp. 145-151 More about this Journal
Abstract
In this study, the effects were analyzed by applying the vibration absorption liner into the guide rail bracket as a part of method to reduce the vibration and noise on the high-rise apartment. As the result of vibration absorption liner performance, it was checked that the level of vibration and noise was reduced around 65.49% in the car side and around 90.05% in the counterweight side. Therefore, the vibration absorption effect by the vibration absorption liner of elevator guide rail bracket became fairly good. In case of the vibration absorption liner application, there was an effect on the reduction of 7.26 to 22.22% at hoistway section area, 3,840,000 to 9,780000 KRW at the cost of material and installation by comparing with the damping beam application. Also, in case of the vibration absorption liner application with light weight instead of damping beam with heavy weight, it was thought to become significant effect at preventing the safety from the accidents on installation site.
Keywords
Elevator; Hoistway wall; Rail bracket; Vibration isolation liner; Acceleration sensors; FFT(Fast Fourier Transform) comparison analysis;
Citations & Related Records
Times Cited By KSCI : 14  (Citation Analysis)
연도 인용수 순위
1 J. H. Lee & J. U. Cho. (2015). Convergent Study on Fatigue Life Analysis of Driving Shaft in Jet Engine. Journal of the Korea Convergence Society, 6(6), 279-284. DOI : 10.15207/JKCS.2015.6.6.279   DOI
2 G. G. Choi & J. U. Cho. (2018). A Convergence Study through Durability Analysis due to the Number of Automotive Seat Frame Supports. Journal of the Korea Convergence Society, 9(8), 155-160.   DOI
3 D. Y. Lee. (2018). Analysis of Lower Extremity Muscle Activation According to Squat Type during Whole-Body Vibration. Journal of the Korea Convergence Society, 9(10), 371-376. DOI : 10.15207/JKCS.2018.9.10.371   DOI
4 J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis. Journal of the Korea Convergence Society, 6(4), 99-105. DOI : 10.15207/JKCS.2015.6.4.099   DOI
5 S. Y. Oh. (2012). A Traffic Hazard Prediction Algorithm for Vehicle Safety Communications on a highway. Journal of Digital Convergence, 10(9), 319-324. DOI : 10.14400/JDPM.2012.10.9.319   DOI
6 K. H. Ko. (2018). An Estimating Algorithm of Vehicle Collision Speed Through Images of Blackbox. Journal of Digital Convergence, 16(9), 173-178.   DOI
7 J. H. Hyeon, Y. H. Moon & S. W. Ha. (2018). Development of Automation Software for Corner Radius Analysis of Composite Laminated Structure. Journal of Convergence for Information Technology, 8(3), 107-114. DOI : 10.22156/CS4SMB.2018.8.3.107   DOI
8 J. H. Ku. (2017). A Study on the Platform for Big Data Analysis of Manufacturing Process. Journal of Convergence for Information Technology, 7(5). 177-182. DOI : 10.22156/CS4SMB.2017.7.5.177   DOI
9 Z. H. Wang., C. K. Chun & Y. C. Kwon. (2018). Study on Exhaust Air Heat Transfer Characteristics of Heat Exchange System for White Smoke Reduction. Journal of Korean Society of Mechanical Technology, 20(6), 739-744.   DOI
10 Y. S. Choi & Y. C. Kwon. (2019). An Experimental Study of Air-side Heat Transfer and Pressure Drop of Evaporator for Refrigerator Unit. Journal of Korean Society of Mechanical Technology, 21(1), 42-47.   DOI
11 D. S. Lee, H. S. Lee, S. H. Pyo, J. W. Yoon & S. K. Lyu. (2019). Study on Design of Heavy Payload Robot Considering Design Factor of Gravity Compensator. Journal of the Korean Society of Manufacturing Process Engineers, 18(5), 23-28. DOI : 10.14775/ksmpe.2019.18.5.023   DOI
12 S. H. Hong, Y. H. You, S. N. Jung & D. H. Kim. (2019). Vibratory Loads Reduction of a Coaxial Rotorcraft Using Individual Blade Control Scheme. Journal of the Korean Society for Aeronautical & Space Sciences, 47(5), 364-370. DOI : 10.5139/JKSAS.2019.47.5.364   DOI
13 Y. K. Shin. (2019). Study on Reduction of Excessive Noise and Vibration of Aft Part of High Speed Ro-Ro Passenger Ship. Journal of Ocean Engineering and Technology, 33(2), 196-202. DOI : 10.26748/KSOE.2019.016   DOI
14 C. J. Choi, J. C. Gao, J. Y. Kim & Y. S. Jung. (2016). Research on the Relationship between Thermoelectric Module with Defects and Thermal Performances. Journal of the Korean Society of Manufacturing Process Engineers, 15(4), 125-133. DOI : 10.14775/ksmpe.2016.15.4.125   DOI
15 M. S. Han & J. U. Cho. (2016). Durability Analysis through the Radiation of Heat of a Laptop. Journal of the Korean Society of Manufacturing Process Engineers, 15(5), 25-30. DOI : 10.14775/ksmpe.2016.15.1.089   DOI