• 제목/요약/키워드: Elevator Industry

검색결과 32건 처리시간 0.028초

써멀 메니지먼트(Thermal Management)에 의한 3상 전압형 인버터의 전력손실 최적화 설계 (Optimal Design of Power Loss for 3 Phase Voltage Source Inverter by using Thermal Management)

  • 조수억;박성준
    • 전기학회논문지
    • /
    • 제56권10호
    • /
    • pp.1757-1762
    • /
    • 2007
  • Recently, the demand for the low cost power conversion equipment is rapidly increased. To develop this three phase voltage source inverter, optimum power conversion equipment to system is designed. The optimum operation method to minimize the power loss also satisfy the life time of the power electronics that is request in the present industry. In this paper, the efficient operating method to change of the acceleration, jerk, and switching frequency in the interval of acceleration is selected to optimize the power loss and life time of the power electronics by using the elevator model. So, we proposed the method that 50[A] rating power electronics is adopted in 9[kW] load.

Motion Coprocessor를 이용한 유도전동기의 벡터제어 (Vector Control of Induction Motors Using Motion Coprocessor)

  • 김성훈;안호균;곽군평
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 F
    • /
    • pp.2748-2750
    • /
    • 1999
  • This Paper describes the design of an induction motor control using the TMS320C32 Digital Signal Processor and the ADMC201 motion coprocessor. Presented hardware architecture can be used for several industry applications with wide range of speed control, e.g. elevator and cranes application, servo motor, electrical vehicles. The main purpose of the paper is demonstration of the implementation and maximum utilization of the ADMC201 motion coprocessor in digital vector control system for AC drives.

  • PDF

모니터용 유연 승강의 스프링 설계에 관한 연구 (A Study on the Spring Design of Smooth Lifting System for Monitor)

  • 정선환;최성대;변용근;최은환
    • 한국기계가공학회지
    • /
    • 제4권4호
    • /
    • pp.48-53
    • /
    • 2005
  • This research is materialized the mechanism of a interlocking elevator device to meet with customer's requirement demanding a variety of function. On this suitably theoretical translation and by considering of material significance of the most factor's tension spring and torsion spring, it's compared and reviewed the stress's calculation according that SWC and SWPB applied differently. And also that is approved through actual experiment. Out of a variety of feasible movement. Torque Balance is materialized by combination of tension spring, torsion spring and disk spring. So that application of 3 factors for optimal design is very important factor. In future, this research thesis make sure to play a highly role for application and improvement mechanically in various industry sector out of materializing interlock.

  • PDF

고압 커패시터 투입시 수용가측 엘리베이터 정지사례 분석 (Case Study of Power Factor Correction Capacitors On Upseting Elevator)

  • 조남훈;전영재;박희철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 A
    • /
    • pp.33-35
    • /
    • 2003
  • Capacitor switching is essential for the economic operation, and proper voltage control of KOREA electric utility distribution system. Voltage transients produced by capacitor switching (around 2.0 per unit at substation and 2.5 or less per unit at customer site, and lasting less then 1ms) do not have the magnitude or duration to interfere with the operation of computers, but they do disrupt the operation of adjustable speed drivers. The result of our research, ASD manufacturers should team from the computer industry and design products that will operate satisfactory in the electrical envelopment in which they will be placed. In this case history, the inductors on the input to ADSs in order to prevent nuisance tripping from capacitor switching(and other causes within the apartment) proved to be an effective, low-cost solution.

  • PDF

라즈베리파이를 이용한 얼굴검출 및 인식 시스템 개발 (Development of a Face Detection and Recognition System Using a RaspberryPi)

  • 김강철
    • 한국전자통신학회논문지
    • /
    • 제12권5호
    • /
    • pp.859-864
    • /
    • 2017
  • 사물인터넷이 4차 산업혁명을 주도할 새로운 기술로 각광받고 있으며, 이미 많은 기술과 제품들이 발표되어 인간의 삶의 질을 높이는 데 많은 기여를 하고 있다. 본 논문에서는 건물의 엘리베이터 등에서 얼굴 검출 및 얼굴 인식에 사용할 수 있는 시스템을 개발한다. 얼굴 검출 시스템은 하르 직렬 분류기를 사용하며, 얼굴 인식 시스템에는 수행 시간을 줄이기 위하여 본 논문에서 파이썬 언어로 구현된 주성분 분석(PCA)이 얼굴 인식을 위한 고유 얼굴(eigenface) 계산에 사용된다. 데이터베이스에 저장된 얼굴과 얼굴 검출 시스템의 결과로부터 얼굴을 인식하기 위하여 SVM 또는 유크리디안 측정이 사용된다. 제안된 시스템은 OpenCV를 사용하여 라즈베리파이 3에 구현된다. 본 논문에서 구현된 주성분 프로그램의 성능을 구하기 위하여 기존의 주성분 프로그램과 비교하여 얼굴 인식율과 수행시간을 비교하였다. 성능 평가를 위하여 ORL 얼굴 데이터베이스에서 40명의 얼굴에 대하여 각각 10 개의 이미지를 이용하여 학습에 200, 테스트에 200개의 이미지를 사용하였다. 본 논문에서 제안된 PCA와 유클리디안 측정을 이용한 경우 약 93%, SVM의 경우 약 96% 이상의 얼굴 인식률을 얻었다. 그러나 수행시간은 본 논문에서 구현된 PCA를 사용할 경우 약 0.11초, 기존 PCA의 경우 약 1.1초로 약 1/10로 수행 시간을 줄일 수 있었다. 그러므로 본 논문에서 개발된 시스템은 실시간 결과가 필요한 보안 시스템, 엘리베이터 모니터링 시스템 등에 적용할 수 있을 것으로 기대된다.

AHP 분석을 이용한 기계식 주차설비 건설 중 위험성 평가방안 연구 (Risk Assessment of Mechanical Parking Facility during Construction based on AHP Analysis)

  • 이정한;김용곤;이재원;김종훈
    • 한국안전학회지
    • /
    • 제37권5호
    • /
    • pp.33-41
    • /
    • 2022
  • As the number of automobile registrations increases yearly, parking spaces that are located in downtown areas are increasing, and mechanical parking facilities are also increasing. Therefore, there is a high risk of accidents when installing and repairing a mechanical parking facility. In the preceding six years (from 2012 to 2018), the statistics that pertain to accidental disasters indicated that a total of 137 disaster victims were generated by the construction sector, 33 accidents occurred, and 10 people died. However, only the safety management items pertaining to accidents that occur during maintenance work and the use of the installed mechanical parking facilities are being studied; furthermore, there is no ongoing research with respect to the risk management that is conducted at the construction site. In 2017, the Korea Occupational Safety and Health Agency (KOSHA) announced the "Guidelines for Safe Installation and Maintenance of Mechanical Parking Equipment"; however, it is a safety guideline that is limited to the installation of basic protective equipment and to facility installation. There is no model for mechanical parking facilities that is indicated in the "Risk Assessment Model by Construction Industry Type", which is issued by the Safety and Health Corporation and is widely utilized for risk assessment in the construction industry; moreover, elevator installation work CODE N0: 22 is the only major example of a disaster. In this study, "risk assessment through a focus group interview" was performed, and data was derived from the "risk assessment of Article 41 (2) of the Industrial Safety and Health Act", which reflects the characteristics of the construction industry based on AHP analysis. The results of this study can be utilized for the risk assessment that is conducted during the construction stage of mechanical parking facilities.

미국 아파트 노인거주자의 주거이동 의사, 주거이동 고려이유 및 주거 선호에 관한 연구 (Intention to Move, Reasons for Considering Moving, and Future Housing Preferences of Senior Residents Living in Multifamily Housing in the United States)

  • 권현주
    • 한국주거학회논문집
    • /
    • 제26권4호
    • /
    • pp.1-10
    • /
    • 2015
  • This study identifies intention to move, reasons for moving and housing preferences of US residents 55 and older living in non-subsidized and market-rate multifamily housing in the United States. Data were collected using an on-line survey; mixed methods were used for data analysis (N=431). Results show that more than half of the respondents intend to move. Senior residents who were younger than average age of the respondents, not married, renters, had no elevator, and reported lower residential satisfaction with their housing unit, multifamily housing community and local area were more likely to intend to move. Seven reasons for considering moving were found: finance, health, lifecycle stage, housing unit, multifamily housing community, other. When asked about their future housing, more than 80% desired independent living rather than assisted living facilities or nursing homes, 40% wanted to live in multifamily housing, and 51% hoped to own their housing rather than renting. The findings offer meaningful information to the multifamily housing industry in the United States and in countries where the population is aging and where multifamily housing is the predominant housing type.

한국과 주요 외국의 안전보건교육제도에 관한 비교 연구 (A Comparative Study on the Safety and Health Education System between Korea and other Countries)

  • 정승래;박현진;장성록
    • 한국안전학회지
    • /
    • 제31권5호
    • /
    • pp.117-123
    • /
    • 2016
  • After the Se-wol ferry disaster in Korea, the safety issue was highly spotlighted in a number of media, and consequently the ministry of public safety and security was newly established under the public attention. In addition to this, a recent earthquake in Gyeonju suggested the training issues for public such as evacuation and public safety. Regarding the industry, one of significant reasons causing the accidents were inadequate training, in execution of safety manual or inexperienced first response. Although the engineering or scientific study provided a basis of the industry safety and health in Korea a study focusing on the safety and health education system should be highlighted in that the law is the only way to execute the policy. In this manner, the goal of current study was to compare the safety and health education system in Korea to other countries including America, England and Germany. Especially, the law for training method, contents, supervision and punishment was analyzed. Result showed (1) lack of a structured training course for educating safety and health education trainer, (2) no training system of safety and health education to public or workers, and (3) less specific law for supervision and punishment as compared to the America, England and Germany.

전원회생 절연형 컨버터의 실증을 위한 기본연구 (A Study On The Implementation Of Isolated Type Power Regenerative Converter)

  • 안준선
    • 한국정보전자통신기술학회논문지
    • /
    • 제12권5호
    • /
    • pp.507-511
    • /
    • 2019
  • AC 구동 시스템에서의 회생에너지의 활용은 1990년대 본 방식이 산업계의 표준 방식이 된 이후 오랜 기간동안 이슈화 되어 왔다. 회생에너지의 크기에 따라 저용량의 경우에는 제동저항으로 소모시키는 방식이 일반적이었으나, 이러한 에너지의 활용이 적극적으로 논의외면서 회생용 컨버터를 장착하는 방식이 보급되고 있다. 본 논문에서는 종래의 전원회생 컨버터방식의 최대 단점으로 언급되고 있는 순환전류의 저감을 위해 절연형 회생 컨버터 방식을 제안하였다. 에너지 절감차원에서 일정 용량이상의 AC 드라이브 시스템에는 회생에너지를 활용하기 위한 전원회생 컨버터 시스템을 채용하는 것이 일반적이나, 시스템의 구조 상 순환전류가 발생하게 되어, 이로 인한 효율의 저하 역시 필연적으로 발생된다. 본 논문에서는 이러한 순환전류를 해결하기 위한 절연형 전원회생 컨버터 방식을 제안하였고, 가능성을 검증하기 위한 컴퓨터 시뮬레이션을 수행하였다. 시뮬레이션 결과 기존의 시스템에서 나타난 정격대비 20%의 순환전류가 제안된 시스템에서는 나타나지 않음을 확인하였고 제안된 시스템의 타당성을 확인할 수 있었다.

발효 콩의 NF-κB 활성 억제를 통한 cyclooxgenase-2 활성과 prostaglandin E2 생성 억제 (Inhibition of Cyclooxygenase-2 Activity and Prostaglandin E2 Production through Down-regulation of NF-κB Activity by the Extracts of Fermented Beans)

  • 이혜현;박철;김민정;서민정;최성현;정영기;최영현
    • 생명과학회지
    • /
    • 제20권3호
    • /
    • pp.388-395
    • /
    • 2010
  • 본 연구에서는 콩 발효 산물 추출물의 항염증 효능에 관한 기초 자료를 제시하기 위하여 PMA에 의해 유도되는 COX-2의 발현 및 $PGE_2$의 생성 증가에 미치는 이들 추출물의 영향을 조사하였다. 본 연구에서 조사된 3가지 콩 발효 산물은 PMA에 의한 COX-2의 발현 증가를 매우 유의적으로 차단하였으며, 이는 $PGE_2$의 생성 억제와 연관성이 있었다. 아울러 PMA에 의한 NF-${\kappa}B$ 활성 증가 또한 콩 발효 산물들에 의하여 유의적으로 억제되었다. 이러한 결과들은 콩 발효 산물에 의한 NF-${\kappa}B$ 활성의 억제가 COX-2의 발현을 저하시켰으며, 이로 인한 $PGE_2$의 생성이 억제된 것으로 추정되어진다. 이러한 콩 발효 산물의 항염증 효과는 대두 추출물보다 아가콩 추출물에서 더욱 효과가 높게 나타났으며, 이는 향후 아가콩 추출물은 염증성 질환 예방/치료를 위한 적용 가능성이 매우 우수함을 제시하여 주는 결과이다.