• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.71-76
• /
• 2000

On multimedia teleconferencing system existing a number of participants, face of the participants can beperceived by visual image. However, differentiation of each participant's voice and spaciousness sense are very hard since voice of all participants is processed with one dimensional data. In this paper, we implemented three dimensional audio rendering system using the HRTF(Head Related Transfer Function) and distance sense reproduction method and determined the optimal location of the participants for teleconferencing system. In the results of the listening test using elevation and azimuth angle, we showed that directional perception of the azimuth angles were better than that of the elevation angles. Specially, we showed that participant location using the HRTFS of the azimuth angle 10" , 90" , 270" and350" was efficient in teleconferencing system existing four participants. We also proposed that distance cue was used for enhancement of the reality and location of many participants more than five.ipants more than five.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.3
• /
• pp.209-214
• /
• 2020

Objective: Using biofeedback in instructing pelvic floor muscle (PFM) activation is a great method to provide information on muscle contraction. This study aimed to determine the immediate effectiveness of a mobile game-based instruction with an extracorporeal biofeedback device (EBD) to improve PFM contraction in healthy subjects. Design: Cross-sectional study. Methods: Sixteen healthy subjects (4 men and 12 nulliparous women; age, 31±5 years) were enrolled. The subjects were randomly categorized into two groups, those who were to receive instructions on how to contract the PFM by using the EBD (n=7) and those who were to undergo a transabdominal ultrasonography (TAUS; n=9) with biofeedback. PFM function was measured as the displacement (mm) of PFM elevation by using the TAUS before and after the instructions in each group. Results: The EBD and TAUS groups showed a significant increase in the displacement of PFM elevation after the instructions from 5.93±4.03 mm to 7.62±3.77 mm and from 5.27±3.39 mm to 7.47±2.79 mm, respectively (p<0.05). No significant differences were found between the two groups. Conclusions: The results of this study indicated that instructions for PFM contraction using the EBD and TAUS showed an immediate effect; however, no significant difference in effectiveness was observed between the two instruction methods. Therefore, not only can the TAUS method be used but the EBD method can also be used as a PFM instruction method for noninvasive procedures. However, further studies are needed to demonstrate the effectiveness of training and exercise on larger sample sizes that includes patient populations with PFM dysfunction.

• Journal of Korea Water Resources Association
• /
• v.44 no.3
• /
• pp.179-188
• /
• 2011

In this study, the regional factors in Gangwondo were used to analysis the relationship between point precipitation and areal precipitation. The most province area in Gangwondo is consist of mountainous terrain. At the east part of the Taebaek Mountains, the slope is very steep and the coastal plains don't exist. At the west part of the Taebaek Mountains, the slope is mild, there are many rivers, such as South Han-river and North Han-river, and the regions are very complex terrain. The data of 66 stations in Gangwondo and the PRISM (Parameter-elevation Regression on Indepedent Slope Model) were used to estimate the spatial distribution of precipitation. According to the topographic conditions, such as elevation and slope, and the regional conditions, such as Youngdong and Youngseo, the spatial distribution of precipitation is well shown. At the results of cross-validation, the RRBIAS and the RRMSE are under 0.1 and therefore the analysis of the PRISM are well conducted. Consequently the PRISM in this study is a appropriate method to estimate the spatial distribution of precipitation in Gangwondo.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.7-12
• /
• 2004

The technique of birdeye image generation of terrain through the use of satellite digital images and digital maps are very important elements and have applications in fanning establishment as well as the actual design of several construction works in complex fields. This paper studies stereo perspective image generation as a possibility through 3-dimensional analysis combined with digital elevation data and remotely sensed images. For this, first of all, ortho-images generated by very accurate GCP and DEM from contour file makes 3-dimensional terrain analysis possible and allows stereo­viewing at the highway construction planning sites. So, we developed the technical methods for the 3-dimensional approach on the planning sites of highways by use of perspective orthoimages. From this research, diverse terrain analysis is possible through stereo perspective image generation, and can leads to various application in road construction through gain study results from access to realtime virtual spatial on the objects area in korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.187-194
• /
• 2009

This study is to improve position accuracy by selecting proper a servo motor and applying FOC(Field Oriented Control) on developing a 3D terrestrial laser scanner. A 3D terrestrial laser scanner under developing has range of scanning of azimuth 360$^\circ$and elevation 270$^\circ$. It is implemented by precise controlling of a azimuth motor and a elevation motor. In the consequence of study, we have known that position accuracy of the motor can be able to be improved with constant torque of the motor by using FOC(Field Oriented Control). The control technic of the motor is possible to apply a 3D terrestrial laser scanner as well as a robotic total station.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.396-405
• /
• 2009

This paper describes playback downlink and telecommand uplink channel design performed for a transportable small-sized KOMPSAT(Korea Multi-Purpose Satellite) ground station. As a result of downlink channel design, required receiving performance was calculated from the threshold signal-to-noise ratio of playback signal and it was revealed that this performance can be guaranteed in 1.5 m ground station with 6.5 dB/K of G/T. For the uplink channel design, 40 dBW of EIRP was derived from the threshold signal-to-noise ratio of telecommand signal received at on-board receiver. The implemented small-sized ground station based on design was evaluated to be fully acceptable for KOMPSAT TT&C(Telemetry, Tracking and Command) system and playback downlink design without taking account of additional 3 dB system link margin was shown to be effective because it had provided constantly initial channel performance without any remarkable degradation over several years of tests with KOMPSAT and KOMPSAT-2, for both uplink and playback downlink in the elevation angle above $10^{\circ}$.

• Journal of Korea Water Resources Association
• /
• v.38 no.12 s.161
• /
• pp.1021-1028
• /
• 2005

This study purpose to develop simulation model of optimal design condition of urban storm sewer system considering risk. Urban Storm Sewer Optimal Design Model(USSOD) can compute pipe capacity, pipe slope, crown elevation, excavation depth, risk and return cost in the condition of design discharge. Rational formula is adopted for design discharge and Manning's formula is used for pipe capacity. Discrete differential dynamic programming(DDDP) technique which is a kind of dynamic programming(DP) is used for optimization and first order second moment approximation method and uncertainty analysis is also for developing model. USSOD is applied to hypothetical drainage basin to test and verify, which resulted economical and efficient design in urban drainage sewer system.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.11-18
• /
• 2001

The purpose of this study is to desirable curriculum for interior design major in vocational high school in order to enhance their competitiveness. The study has been carried out by surveying the cognition and requirement among the people who are working in interior design field. The major findings from the survey research are summarized as follows : 1) Hiring vocational high school graduate is positively responded over sixty percentage. The main reason to hire interior design major in vocational school is because of firm believing their capabilities and their own specialties rather than academic degree. 2) It is believed that new vocational high school graduate is lacking behind in most area at the beginning comparing with new college graduate. However it is believed that high school graduate will become equal to the college graduate after a few years and they are more specialized in certain area that college graduate. 3) The most recommendable area for the vocational high school graduate are CAD and Interior Construction Work. 4) The appropriate text book content of (:AD and interior construction work based on the requirement from the industry are as follows ; Regarding to CAD, a specialized textbook for CAD should be written. It is desirable to) educate how to express plan, elevation, perspective drawing and how to develop the presentation skills. Regarding to the Interior Construction Work desirable to develop a specialized textbook and include on the job training program. On the job training is expected to give a practical knowledge and experience by monitoring and drawing by himself every steps from the architectural area to the material selection.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.417-428
• /
• 2017

In this paper, we describe the architectural design, unit component hardware design and core software design(Helmet Pose Tracking Software and Terrain Elevation Data Correction Software) of IHDS(Intelligent Helmet Display System), and describe the results of unit test and integration test. According to the trend of the latest helmet display system, the specifications which includes 3D map display, FLIR(Forward Looking Infra-Red) display, hybrid helmet pose tracking, visor reflection type of binocular optical system, NVC(Night Vision Camera) display, lightweight composite helmet shell were applied to the design. Especially, we proposed unique design concepts such as the automatic correction of altitude error of 3D map data, high precision image registration, multi-color lighting optical system, transmissive image emitting surface using diffraction optical element, tracking camera minimizing latency time of helmet pose estimation and air pockets for helmet fixation on head. After completing the prototype of all system components, unit tests and system integration tests were performed to verify the functions and performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.733-736
• /
• 2009

Power Line Communication(PLC) is need not additional communication line. So establishment expense is inexpensive and application is simple. Therefore, lower part network of various application field is possible. However, there are high subordinate interference and noise problem on limited transmission data and communication interference element. Wireless Sensor Network(WSN) is need not infrastructure, Self-regulating network architecture of sensor nodes is possible. So at short time, network construction is available. But, power consumption is increased by active sensing for QoS elevation and unnecessary information transmission, low electric power design and necessity of improve protocol are refered to life shortening problem and is studied. In this paper, supplement problem of power line communication and wireless sensor network mutually and because advantage becomes linkage integration control system using synergy effect of two technologies as more restriction be and tries to approach structurally control network that is improved for smooth network environment construction. Honeywell's hybrid sensor network does comparative analysis(benchmarking). Confirm performance elevation proposing teaming of power line communication and wireless sensor network. Through simulation, service delay decreases and confirms that performance elevation.