Nd-Fe-B계 합금에 대한 HDDR(hydrogenation : 수소화 - disproportionation : 분해 - desorption : 탈가스 - recombination : 재결합) 공정에서 실질적인 어려움은 제조된 분말의 자기적 특성, 특히 보자력의 재현성이 대단히 낮다는 점이다. 본 연구에서는 수소파쇄 시 입자 내에 미세균열을 최대한 도입하고 이것이 HDDR 처리한 $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ 합금 분말의 보자력의 재현성에 미치는 영향을 조사하였다. 수소파쇄된 분말 입자 내에 미세균열을 최대한 많이 도입하기 위하여 분해반응 전 고온에서 충분히 수소방출 처리를 실시하였다. 추가 수소방출처리를 실시하고 HDDR 처리하여 제조한 분말은 보자력 및 그 재현성이 향상되었다. 추가 수소방출로 결정격자가 수축하면서 입자 내에 더욱 더 많은 미세균열이 도입되고, 이로 인하여 분말의 HDDR 반응 시 입자 전체에 걸쳐서 HDDR 반응이 균일하게 진행 되어 보자력의 재현성이 향상되었다.
제주도의 새로운 소득 과수인 참다래 '헤이워드'를 대상으로 IPCC의 미래 시나리오 기후조건에서 개화기 분포를 정밀하게 추정함으로써 도내 재배적지의 지리적 이동을 가시화 하였다. 개화기 예측을 위해 휴면시계모형과 발육속도모형을 각각 '헤이워드' 품종에 맞도록 조정하였으며, 시공간적으로 독립적인 자료(해남 2006-2009, 제주 2010-2011)에 의해 검증한 결과 개화일 추정오차는 RMSE = 2.5일(휴면시계모형)과 4.0일(발육속도모형)로 나타났다. 제주도의 현재평년(1981-2010) 기온 및 A1B 시나리오에 따른 10년 단위 미래 기온을 종관기상자료와 공간기후추정기술에 의해 상세 격자형 분포도로 제작하였다. 일별 기온분포도를 이용하여 휴면시계모형을 구동시켰으며 그 결과를 30m 해상도의 상세 개화일분포도로 가시화 하였다. 이 모의결과에 따르면 미래로 갈수록 현재평년에 비해 개화일이 앞당겨지는 한편, 저온요구도의 부족으로 개화불량인 지역이 늘어날 것으로 추정된다. 개화기에 근거한 재배적지의 면적은 가까운 미래에는 증가하지만 먼 미래로 갈수록 급격히 줄어들어 21세기 말에는 현재의 절반이 될 것이며, 같은 기간 재배적지는 해안지대로부터 해발 250m 정도 한라산 방향으로 이동할 것으로 예측된다.
Background: Elevated testicular temperature disrupts spermatogenesis and causes infertility. In the present study, the protective effect of enzymatically biotransformed Panax ginseng Meyer by pectinase (GINST) against chronic intermittent heat stress-induced testicular damage in rats was investigated. Methods: Male Sprague-Dawley rats (4 wk old, 60-70 g) were divided into four groups: normal control (NC), heat-stress control (HC), heat-stress plus GINST-100 mg/kg (HG100), and heat-stress plus GINST-200 mg/kg (HG200) treatment groups. Each dose of GINST (100 mg/kg and 200 mg/kg) was mixed separately with a regular pellet diet and was administered orally for 24 wk. For inducing heat stress, rats in the NC group were maintained at $25^{\circ}C$, whereas rats in the HC, HG100, and HG200 groups were exposed to $32{\pm}1^{\circ}C$ for 2 h daily for 6 mo. At week 25, the testes and serum from each animal were analyzed for various parameters. Results: Significant (p < 0.01) changes in the sperm kinematic values and blood chemistry panels were observed in the HC group. Furthermore, spermatogenesis-related molecules, sex hormone receptors, and selected antioxidant enzyme expression levels were also altered in the HC group compared to those in the NC group. GINST (HS100 and HS200) administration significantly (p < 0.05) restored these changes when compared with the HC group. For most of the parameters tested, the HG200 group exhibited potent effects compared with those exhibited by the HG100 group. Conclusion: GINST may be categorized as an important medicinal herb and a potential therapeutic for the treatment of male subfertility or infertility caused by hyperthermia.
고상반응법으로 제조된 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 조성의 페롭스카이트 산화물 상용분말을 압축 성형 후 $1100^{\circ}C$에서 2시간 동안 소결한 후, 1.0 mm의 두께를 가지는 평판형 분리막을 제조하였다. $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 분리막의 산소투과량은 온도와 산소분압이 증가함에 따라 증가하였고, 산소투과의 활성화에너지는 산소분압이 증가할수록 높은 값을 나타내었다. $950^{\circ}C$에서 공급가스와 스윕가스의 유량 변화에 따른 투과 특성 분석 결과, 유량이 증가할수록 높은 산소투과량을 보였으며, 공급가스보다 스윕가스의 유량에 따라 크게 변함을 확인하였다.
쯔쯔가무시증 환자 발생의 시 공간적 분포를 기후, 서식환경 변화 등 환경생태요인과 관련하여 질병지리적 측면에서 분석하였다. 쯔쯔가무시증은 1951년에 보고된 뒤 1986년에 재발했고, 1998년과 2004년부터 급증하였다. 계절별로는 11월(58%)과 10월(33.2%)에 주로 노인층에서 발병한다. 남부평야지대에 발생하던 쯔쯔가무시증은 점차 동부산지지대를 제외한 전국으로 확산되었으며, 경기도 화성시는 발병자가 급증한 대표지역이다. 발병자가 급증한 것은 기후와 토지이용 변화 등 환경생태요인이 복합적으로 작용한 결과로 본다. 전국적으로는 연평균기온이 상승하고 연평균강수량이 감소하면서 쯔쯔가무시증 환자가 증가하였다. 그러나 사례 조사지역인 화성시, 합천군 등에서는 여름철 기온이 상승하고 강수량 많은 해에 환자가 증가했다. 여름에 기온이 높고 상대적으로 건조하면 식생이 무성해져 털진드기의 생장과 번식이 활발해진다. 이어서 가을이 온화해지면서 털진드기 활동이 활발해지면서 환자가 급증한 것으로 본다. 농촌에서 환자가 많은 것은 1980년대 이후 토지이용 변화에 따라 마을과 경작지 주변에 늘어난 관목숲, 풀숲을 중심으로 쯔쯔가무시증의 매개체인 들쥐류와 털진드기가 번성하면서 질병을 확산시킨 결과로 본다.
This study was conducted to investigate the influence of hydrophilic polymer (HP) mixture ratio (Control, 1.0%, 2.5%, 5.0%, and 10.0%) on growth of eggplant (Solanum melongena) for lower maintenance urban agriculture via green roofs. Although it was not statistically significant (p > 0.05), substrate temperature was decreased as hydrophilic polymer mixture ratio were increased. High substrate water content (95%) was found consistently in growing media under elevated hydrophilic polymer mixture ratio at over 5% during the entire growing period. Substrate electronic conductivity was increased as hydrophilic polymer mixture ratio were increased. Growth index was decreased as hydrophilic polymer mixture ratio was increased. It was reduced about 1/3 and 1/5 compared to that of Control in HP5.0 and HP10.0 treatment plants, respectively. Number of leaves, leaf length, and leaf width were decreased in following order: Control> HP1.0> HP2.5> HP5.0> HP10.0 treatments. There numbers were significantly lower in HP5.0 and HP10.0 treatment plants. Dry weight of shoot and root were decreased as hydrophilic polymer mixture ratio was increased. They were reduced by 1/4 compared to those of Control treatment plants. In addition, visual value was decreased as hydrophilic polymer mixture ratio was increased. Plants grown in HP1.0, HP2.5, and HP5.0 treatments all survived. However, plants grown in the HP10.0 treatment had the lowest survival rate (56%) after 3 months of growing. These results indicate that the advantage of adding hydrophilic polymer to green roof growing media may greater during dry periods. However, the proper mixture proportion of hydrophilic polymer should be determined according to different characteristics of growing media and plant species.
Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.
한국의 전통 방짜유기 제작과정에서 수행되는 염수처리가 가공 도중 유기 표면에 생성되는 흑색 산화막 제거에 유용한 것으로 추정되고 있으나 그 효과에 대하여 체계적인 연구가 수행된 사례는 찾기 어렵다. 본 연구에서는 염수처리가 청동기 제작에 미치는 역할을 밝히기 위하여 제작재현 실험과 성분분석 실험을 실시하였다. 먼저 유기공방에서 다양한 방법으로 염수처리 실험을 수행하였으며 여기에서 얻어진 결과를 바탕으로 실험실에서 자체 제작한 구리합금을 대상으로 두드림, 염수농도, 합금비율 등의 조건을 달리하며 다양한 실험을 수행함으로써 염수처리가 초래하는 효과를 밝히고자 하였다. 실험결과 염수처리를 통하여 고온에서 발생하는 산화막이 용이하게 제거되는 것으로 밝혀졌다. 이는 염수의 주성분인 염소(Cl)와 청동에 포함된 주석의 상호 작용에 기인하는 것으로 드러났으며 염수의 또 다른 성분인 나트륨(Na)은 산화막 제거에 별다른 영향을 미치지 못하는 것으로 판단되었다. 특히 한국의 전통 방짜유기 합금 조성인 주석함량 22%의 청동합금에서는 열간가공 수행 여부와 관계없이 염수처리를 통하여 산화막이 제거되었으며 이때 염수의 농도는 0.5% 이상이어야 효과를 볼 수 있는 것으로 밝혀졌다. 한편 납이 포함된 구리합금에서는 염수처리 효과가 나타나지 않았다. 이는 융점이 낮은 납이 녹으면서 시편 표면에 막을 형성함에 기인하는 것으로 추정된다.
혹서기에 있어 고온 다습한 환경은 동물의 생산성과 생리적 반응에 영향을 주어 HS를 유도하는것으로 알려져 있다. 본 연구에서 HS처리 효과가 도축장 유래 난소에서 채취한 난자의 체외 성숙율, 난할율 및 수정란의 발생능력에 미치는 영향을 비교 검토하였다. 대조군으로서 COCs를 $38.5^{\circ}C$에서 22시간 배양하였으며 실험군은 전배양을 동일하게 21, 18 및 12시간 배양 후 $40.5^{\circ}C$에서 각각 1, 4 및 12시간 동안 후배양하여 HS를 유도하였다. 22 시간 숙성시킨 후, COCs를 체외수정하여 mSOF 배지에서 8 일 동안 배양하였을 때 난자의 성숙율과 수정란의 발생 능력을 조사 하였다. 대조군과 1 및 4 시간동안 HS처리된 난자에서 성숙율과 난할율에는 차이가 없었으나(p > 0.05), 4 시간 HS처리군에서 배반포 형성율이 유의적으로 감소하였다(p < 0.05). 또한, 4시간 이상의 지속적인 HS에 대한 노출은 배반포 형성율과 세포사멸도에 영향을 주는 것으로 관찰되었다(p < 0.05). 이러한 결과는 HS가 난자의 성숙 과정에서 유도되면 수정란의 발생 능력에 부정적인 영향을 줄 수 있음을 시사하며 HS에 의한 소 배반포에서 세포사멸현상이 나타나고 있음을 보여주고 있다.
본 연구에서는 물류창고시설의 개발 증가에 따른 화재사고 증가에 대응하여 실외 환경에서의 PC 슬래브의 화재성능 평가를 위한 실물대 화재실험을 실시하였다. 실외 화재실험에 앞서 고온에서 강연선의 인장 항복 강도를 시험하여 기계적 물성을 분석하였다. 또한, 이전 연구들을 참고하여 강연선의 열적 특성과 콘크리트의 기계적, 열적 특성을 조사하였다. 실외 화재실험은 걸침길이가 50mm, 150mm인 동일한 슬래브 2개의 구조성능 및 내화성능을 분석하기 위해 수행되었다. 걸침길이가 길어질수록 처짐은 감소하였고, 걸침길이에 대한 수평 변위 또한 감소하였다. 200분 가량 진행된 실험에서 슬래브의 탈락이 발생하지 않아 현행 기준이 적절함이 확인되었다. 콘크리트의 폭렬 현상이 발생하여 강연선 일부가 끊어졌으나, 구조성능은 지속되었기 때문에 부착식 공법을 이용한 PSC 슬래브의 실용성을 확인할 수 있었다. 이에 따라, 물류창고 PC 슬래브의 내화성능 판단을 위한 기초 자료로 활용될 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.