• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.508-519
• /
• 2015

The objective of this study was to quantitatively estimate $PM_{2.5}$ source contribution in Gyeongsan. Ambient $PM_{2.5}$ samples have been collected on zefluor, quartz and nylasorb filter by $PM_{2.5}$ samplers of cyclone method from September 2010 to December 2012. Collected samples were analyzed for determining 17 inorganic elements, 8 ions, and 8 carbon components after pretreatment. Based on these chemical information, the PMF model was applied to estimate the quantitative contribution of air pollution sources. The results of the PMF modeling showed that the sources were apportioned by biomass burning source (15.5%), secondary sulfate source (16.0%), industry source (10.4%), soil source (7.0%), gasoline source (9.1%), incinerator source (10.4%), diesel emission source (11.0%), and secondary nitrate source (20.6%), respectively. To analyze local source impacts from various wind directions, the CPF analysis were performed using source contribution results with the wind direction values measured at the site.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.67-74
• /
• 2010

This study was carried out to investigate the pulping and papermaking characteristics of lotus (Nelumbo nucifera G.) leafstalk for the development of high performance paper. Anatomical and chemical properties of the lotus leafstalk were analyzed. The pulping and papermaking properties of the lotus leafstalk by conventional alkali and sulfomethylated pulping processes were also evaluated. The length and width of fibers were 0.06-3.32 mm (av. 1.23 mm) and 3.47-25.6 ${\mu}m$ (av. 20.7 ${\mu}m$), respectively. The length and width of vessel elements were 0.07-0.78 mm (av. 0.20 mm) and 14.1-330.0 ${\mu}m$ (av. 54.13 ${\mu}m$), respectively. The fiber length/fiber width ratio was 60.20. The extractives (cold water, hot water, 1% NaOH and ethanol-benzene) and lignin content of lotus leafstalk were higher than those of plant bast fiber. The contents of holocellulose, lignin, and ash were 73.8%, 24.3%, and 4.3%, respectively. The pulp yields based on pulping methods were sulfomethylated pulping av. 52%, and alkaline pulping av. 42%. The conventional alkaline pulping shows better pulp and sheet properties than the sulfomethylated pulping which was modified pulping processes. But the sulfomethylated pulping shows higher brightness than alkali pulping. In the consequence of FE-SEM observation, lotus leafstalk pulp consists of various kinds of thin walled fibers which have large amount of small pits.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.315-324
• /
• 2003

The purpose of this is to evaluate Hakui Stream Naturalness Index(S.N.I). and to find out stats, problems and opportunities of the Hakui stream by assessment standard. Assessment standard is mainly based on physical structure of stream environment. The purpose evaluating sectors and elements are physical form and structure restoration of stream. To find out assessment standard of stream naturalness index, conceptual frame of assessment standard has been established, for which four sections, for example, longitudinal section, lateral section, stream bottom structure and water environment, have been selected. Overall stream naturalness index of the Hakui stream has been distributed at 3rd to 4th grade, and its assessment index accounted for 3.2 to be 3rd grade, and its mode also did 3rd grade. Stream naturalness index of each section was as follows: Longitudinal section index accounted for 3.6 in average to be 4th grade, and later section index did 3.0 to be 3rd grade, and stream bottom structure index did 3.0 to be 3rd grade, and water environment index did 2.7 to be 3rd grade. Analysis of assessment outcome of stream naturalness index has checked status, Problems and opportunities of corresponding stream. Assessment of stream naturalness index of the study provides useful information for restoration of close-to-nature stream, and furthermore has its meaning in checking problems and opportunities of Hakui stream.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.172-183
• /
• 1995

The airborne concentrations of the welding fumes produced during $CO_2$ arcwelding process at shipbuilding, shiprepairing, container manufacturing and car accessary manufacturing industry were investigated. The effects how much reduced the welding fume were checked when the portable fan was used. The results were as follows; 1.The geometric mean of welding fume concentration in shipbuilding factory was $10.05mg/m^3$. This exposure concentration was higher than other 3 manufacturing industries at 95% confidence level. 2. The sampling filters for welding fume could be digested with acid within 1 hour by microwave oven. The recoveries for investigated metal elements were all over 95%. 3. The optimal wavelength could be selected for the simultaneous analysis of 8 metal elements by ICP(Inductively Coupled Plasma). 4. Noxious gases($O_1,NO_2$) produced during $CO_1$ gas arc welding process were detected that the concentration of ozone($O_1$) was less than 0.01 ppm and that of nitrogen dioxide($NO_2$) was 0.01-0.03 ppm. 5. The geometric mean of welding fume particle diameter was $1.26{\mu}m$ and geometric standard deviation was 1.51 for the counts when particle an analyzer(ELZONE) had been used. 6. When the portable fan had been used,the reduced percent of total welding fume for workers was about 47.8% when portable fan was applied to blow and 71.7% when to exhaust.

• 한국입자에어로졸학회지
• /
• 제19권4호
• /
• pp.111-128
• /
• 2023

Chungcheongnam-do has various emission sources, including large-scale facilities such as power plants, steel and petrochemical industry complexes, which can lead to the severe PM pollution. Here, we measured concentrations of PM₁₀, PM_2.5, and its metallic elements at a suburban site in Taean, Chungcheongnam-do from September 2017 to June 2022. During the measurement period, the average concentrations of PM₁₀ and PM_2.5 were 58.6 ㎍/m³ (9.6~379.0 ㎍/m³) and 35.0 ㎍/m³ (6.1~132.2 ㎍/m³), respectively. The concentration of PM₁₀ and PM_2.5 showed typical seasonal variation, with higher concentration in winter and lower concentration in summer. When high concentrations of PM_2.5 occurred, particulary in winter, the fraction of Zn and Pb components considerably increased, indicating a significant contribution of Zn and Pb to high-PM_2.5 concentration. In addition, Zn and Pb exhibited the highest correlation coefficient among all other metallic elements of PM_2.5. A backward trajectory cluster analysis and CPF model were performed to examine the origin of PM_2.5. The high concentration of PM_2.5 was primarily influenced by emissions from industrial complexes located in the northeast and northwest areas.

• 한국주조공학회지
• /
• 제19권5호
• /
• pp.403-409
• /
• 1999

Mg-Zn-Zr ternary alloys containing 6wt% Zn and (0, 0.4, 0.6)wt% Zr, which is added for grain refinement, can be cast into complex shape by squeeze casting. The influence of Zn and Zr as additional elements on microstructure and mechanical characteristics is investigated by OM, SEM, WDX, XRD and microvickers hardness measurement. The microstructure of Mg-Zn-Zr alloys consists of primary ${\alpha}-Mg$ and MgZn eutectic compound between dendrites. The grain size is decreased from $136{\mu}m$ to $97\;{\mu}m$ by Zr addition, resulting in that the hardness is increased from 42Hv to 59Hv. Furthermore, the grain size is changed to $83{\beta}$ and the hardness is increased to 65Hv by additional infiltration pressure. These results indicate that the Zr addition and additional infiltration pressure are effective for grain refinement acting as an important factor to increase the hardness. The increment in hardness by the Zr addition is slightly larger than that by the additional infiltration pressure.

• 한국환경보건학회지
• /
• 제31권4호
• /
• pp.301-308
• /
• 2005

The purpose of this study was to characterize mass concentration of $PM_{10}\;to,\;PM_{2.5}$ and metallic composition using Minivol Portable Sampler from May 2003 to May 2004 in metropolitan city, Seoul. Annual average concentration of $PM_{10}$ were $57.67({\pm}28.20)\;{\mu}g/m^3\;and\;PM_{2.5},\;were\;42.06({\pm}20.23)\;{\mu}g/m^3$. The concentration was the highest in winter because persistent thermal inversion and in spring, particulate matter concentration was high because of yellow-sand events. The average $PM_{2.5}/PM_{10}$ ratio was 0.73. This indicated $PM_{2.5}$ fraction played a significant role in air pollution. The atmospheric metallic elements in the $PM_{10},PM_{2.5}$ came different emission sources such as soil, traffic, industry and resuspended particles. The results showed that average $PM_{10}$ composition order as Fe>Zn>Pb>Cu>Mn. The metallic elements Zn and Fe were the largest composition in the $PM_{2.5}$

• 항공우주정책ㆍ법학회지
• /
• 제30권2호
• /
• pp.3-36
• /
• 2015

2014년말 기준 항공레포츠 동호인은 약 13만명, 경항공기 356대, 경량항공기 200대, 초경량비행장치 636대에 이르고 있으며, 항공레포츠 산업은 향후 생활수준 향상에 따라 급격히 발전할 유망 레저산업으로 부상하고 있다. 또한 초경량비행장치, 특히 무인비행장치를 활용한 사용사업도 지속적으로 증가하는 추세에 있으며, 향후 이들 장치를 활용한 관광, 레저 사업자 서비스에 대한 수요도 증가할 것으로 전망된다. 본 논문은 경항공기, 경량항공기 및 초경량비행장치 관련 지속적인 수요 증가에 대비하여 경항공기, 경량항공기 및 초경량비행장치 산업 활성화를 위한 "경(소형)비행장 개발의 표준화"를 통한 개발 방안에 대한 연구를 목적으로 하였다. 정부에서 제시하고 있는 항공레저산업의 활성화를 위해서는 전국에 경비행장을 많이 건설하여 운영할 수 있는 인프라를 제공해야 하지만, 각 지자체와 기관들은 앞 다투어 경항공기 비행장 건설에 나서고 있으나, 현실적으로 개발이 된 곳은 많지 않다. 정부차원에서도 경비행장 입지를 위한 연구를 진행한 바 있으나, 후보지만 검토하였고, 실제 건설에 대한 타당성을 수행하고 있지 못하다. 만일 실제로 건설이 된다면, 이러한 비행장의 입지가 과연 적합한지에 대해서는 타당성 검토를 통해 다시 한 번 검증 받게 될 것이다. 그리고 기존 연구보고서들과 관련 문서를 통해 입지선정 요소를 도출해내고, 전문가의 설문을 통해 경비행장의 입지선정 요소들을 분석해 내고자 하였다. 연구모형은 AHP분석을 위해 계층화 형태로 정하였는데, 선행연구 검토를 토대로 가중치를 정하여, 경비행장 입지선정요소에 대하여 2단계 구성을 기술/운영적 요소, 경제/정책적요소로 선정하였다. 그리고 3단계로 기술적 요소, 운영적 요소로 구성하였다. 마지막 단계로는 총 11개 (기상조건, 장애물 제한표면 조건, 공역조건, 운항절차, 소음문제, 환경문제, 시설의 이용성, 건설 및 투자비용, 지역경제 기여도, 접근성, 산업연계성)의 하위요소들을 선정하여 구성하였다. 경항공기 비행장 입지선정 요소 가중치 설문은 본 분야의 전문가 집단인 항공 운항, 관제 등의 교수 및 기장, 교관, 관제사, 정비사 등 전문가 70명을 대상으로 실시하였다. 일관성 지수는 CI=0.02로 일관성이 있는 것으로 나타났다.

• 한국조리학회지
• /
• 제17권4호
• /
• pp.104-120
• /
• 2011

베이커리 기업 광고에 대한 연구 부족과 확대되고 있는 프랜차이즈 형태의 베이커리 경영시스템에서 크리스마스 시즌 유명 연예인 광고모델을 기용한 스타마케팅 활동을 적극적으로 하고 있다. 본 연구의 목적은 베이커리의 크리스마스 광고에 대한 유명 연예인 광고 모델의 속성이 소비자가 인지하는 광고태도, 기업 명성, 기업 신뢰가 어떠한 영향관계가 있는지를 파악하여, 높은 광고비의 지불에도 불구하고 크리스마스 케이크의 판촉수단으로 활용되는 스타마케팅의 장기적인 효과를 실증분석 하고자 하였다. 이러한 검증 결과는 베이커리 산업에의 성공적인 경영 관리에 있어 매우 중요한 핵심요소라 판단되며, 베이커리 브랜드가 기능적 혹은 물리적인 면에서 차이가 없어지면서 브랜드 차별화의 어려움을 겪고 있는 현 시점에서 전략적 시사점을 제안하고자 한다. 본 연구모델의 결과 $x^2$=313.294(df=218, p<0.001)의 수준에서 GFI=.911, AGFI=0.887, NFI=0.935, CFl=0.979, RMR=.126으로 나타났다. 첫 째, 광고 모델 태도에서 모델신뢰성과 모델매력성은 광고 태도에 정(+)의 영향 관계가 있는 것으로 나타났다. 둘째, 광고태도는 기업 명성과 기업 신뢰에 정(+)의 영향 관계가 있는 것으로 나타났으며 셋째, 기업 명성 또한 기업 신뢰에 정(+)의 영향 관계가 있는 것으로 나타났다.

• 화약ㆍ발파
• /
• 제33권1호
• /
• pp.1-12
• /
• 2015

본 연구에서는 국내 77개소의 벤치발파 현장을 조사하여 암석의 종류 및 산업별로 발파계수 C값을 설정하였고, 대표적인 산업용 화약류에 대한 실험데이터와 화약류 제조사의 데이터를 이용하여 폭약위력계수 e값을 설정하였다. 그 결과로 발파계수 C값은 화강암 등 대표적으로 조사한 암석 5종에 대한 평균적인 값의 범위가 0.21~0.30이었다. 그리고 석산, 광업 및 건설현장의 산업별로 산출한 발파계수 C값은 각각 평균 0.22, 0.13 및 0.26이었다. 한편, 폭약위력계수 e값은 화약류의 반응에너지, 탄동구포비, 폭발속도 및 Langefors 단위 중량당 강도 등 4가지로 산출하였고, 대표적인 화약류인 일반에멀젼은 1, 고성능에멀젼은 0.9 그리고 ANFO는 1로 산출되었다.