• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.124-128
• /
• 2000

The high Tc phase disappeared and low Tc phase increased in the substitution of transistion elements for Bi ions. The high Tc phase decreased in the substitution of Si and Sn for Bi ions. The high Tc phase increased in the substitution of Sb, As and P Which Were the same group of Bi for Bi ions. The substitution of P ions was the most effective and then the high Tc phase was formed in large quantity by replacing Bi ions with 30%of P ions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.674-676
• /
• 2008

An electrostatic discharge (ESD) or a noise supplied from the outside has an effect on communication between the timing controller (TCON) and the memory element (EEPROM) through the interface between the timing controller and the memory element in liquid crystal displays (LCD). Therefore, we must apply ESD protection methods to LCD operating circuits for a normal operation. Our ESD protection circuit is to prevent from bi-directional communication errors between TCON and EEPROM due to an electrostatic discharge (ESD).

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2001년도 춘계 공동학술발표회
• /
• pp.349-349
• /
• 2001

• Journal of applied mathematics & informatics
• /
• 제9권1호
• /
• pp.401-413
• /
• 2002

In this paper, we consider hyperstructures (H,.) defined on the set H = {e, a, b}. We study the hyperstructure of H when every element is one of a scalar unit, a unit or a weak scalar. On those conditions the $H_{\upsilon}$-quasigroups are classified. And we obtain the 15 minimal $H_{\upsilon}$-groups and 2 non-quasi $H_{\upsilon}$-semigroups For these we use the Mathematica 3.0 computer programs.

• 대한수학회보
• /
• 제60권1호
• /
• pp.203-223
• /
• 2023

A generalized torsion element is an obstruction for a group to admit a bi-ordering. Only a few classes of hyperbolic knots are known to admit such an element in their knot groups. Among twisted torus knots, the known ones have their extra twists on two adjacent strands of torus knots. In this paper, we give several new families of hyperbolic twisted torus knots whose knot groups have generalized torsion. They have extra twists on arbitrarily large numbers of adjacent strands of torus knots.

• 한국지반공학회논문집
• /
• 제21권6호
• /
• pp.19-30
• /
• 2005

. 본 연구에서는 지반의 비선형을 고려한 하부구조(말뚝지반말뚝캡)의 복잡한 거동과 상부 피어구조와 연계된 상$\cdot$하부 일체화 해석을 수행할 수 있는 3차원 해석기법을 개발하였다. FBPier 3.0과 Croup 6.0의 중간단계에 해당하는 해석기법으로 각 해석기법의 장점을 취하고 단점을 보완하였다. 군말뚝기초 중 말뚝은 말뚝두부 강성행렬을 이용하여 모델링하였으며, 지반은 비선형 하중전이곡선(t-z, q-z, p-y곡선)으로 나타내었다. 말뚝캡은 6개의 자유도를 갖는 개선된 4절점 평면쉘(Flat shell)요소루 교각(피어)은 3차원 보(Beam)요소로 모델링 하여 상$\cdot$하부 일체해석이 가능하게 하였다. 말뚝두부 강성행렬의 하중크기에 따른 비선형성을 고려하기 위하여 점증하중-할선계수법을 제안하였다. 기존의 비선형 해석기법과의 비교$\cdot$분석 결과, 본 해석기법이 말뚝을 FBPier 5.0과 달리 말뚝두부 강성행렬을 이용하여 모델링 하였어도 말뚝두부 및 교각 상단에서의 변위를 비교적 정확히 산정 가능하였다.

• 한국공간구조학회지
• /
• 제16권3호
• /
• pp.31-36
• /
• 2016

• 대한토목학회논문집
• /
• 제32권2C호
• /
• pp.49-60
• /
• 2012

본 연구에서는 국내 지반조건에 적합한 대심도 마찰무리말뚝의 주면하중전이 해석 및 주면 무리효율을 고찰하였으며, 여러 현장재하시험 자료와 3차원 유한요소해석 및 이론적인 방법을 통해 대심도 마찰말뚝의 f-w곡선을 제안하였다. 현장재하시험 사례와의 비교분석 결과, 제안된 해석방법은 기존 f-w곡선에 비해 대심도 마찰말뚝의 거동 및 변형 특성을 적절히 예측함을 알 수 있었다. 또한 마찰무리말뚝의 무리효과 및 무리효율을 정량적으로 평가하기 위하여 말뚝 배열, 간격, 지반조건 및 말뚝캡의 위치에 따른 수치해석을 수행하여 다양한 조건 별 마찰무리말뚝의 주면 무리효율을 제시하였다.

• Journal of Nutrition and Health
• /
• 제8권1호
• /
• pp.39-46
• /
• 1975

This studies were designed to know the contents of trace element and magnesium in cereals. Twenty two kinds of cereal, 104'samples, were analyzed by atomic absorption spectrophotometer for the determination of Manganese, Iron, Magnesium, Chrome, Cupper, Nickel, Zinc, Stannous, Lead and Cadmium. The results are as follows: 1) The contents of Mn and Fe in the sesame group show highest value and next is bean group. In the rice group its content shows lowest value than other cereals. 2) In the Cr content its value is lower than other elements in cereals respectively. Cr content of sesame and bean group show higher than rice and barley group. 3) The contents of Cu and Ni in the sesame and bean group show higher value than the value of rice and barley group. Its contents of rice and barley group is almost equal in Cu and Ni. 4) For the Zn content the value of sesame group is higher than other cereals and next is bean group. In the Sn content the value of bean group shows higher one than other cereals. The contents of Zn and Sn in rice and barley group are lower than other cereals. 5) The value of Pb is almost equal to each cereal. The content of Cd in bear group and barley group show higher than other cereals and its value of rice group is equal to the value of barley group.

• Structural Engineering and Mechanics
• /
• 제14권5호
• /
• pp.595-610
• /
• 2002

This paper presents an efficiency of various non-conforming (NC) modes in development of a series of new finite elements with the special emphasis on 4-node quadrilateral elements. The NC modes have been used as a key scheme to improve the behaviors of various types of new finite elements, i.e., Mindlin plate bending elements, membrane elements with drilling degrees of freedom, flat shell elements. The NC modes are classified into three groups according to the 'correction constants' of 'Direct Modification Method'. The first group is 'basic NC modes', which have been widely used by a number of researchers in the finite element communities. The basic NC modes are effective to improve the behaviors of regular shaped elements. The second group is 'hierarchical NC modes' which improve the behaviors of distorted elements effectively. The last group is 'higher order NC modes' which improve the behaviors of plate-bending elements. When the basic NC modes are combined with hierarchical or higher order NC modes, the elements become insensitive to mesh distortions. When the membrane component of a flat shell has 'hierarchical NC modes', the membrane locking can be suppressed. A number of numerical tests are carried out to show the positive effect of aforementioned various NC modes incorporated into various types of finite elements.