• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.482-486
• /
• 2007

카메라폰의 비중이 증가함에 따라 카메라 모듈, 회전힌지 모듈, CCP 등 전용부품 시장이 확대되어 높은 성장을 유지했다. 동시에 카메라폰의 다기능화 및 고화소화로 인하여 카메라폰 대당 출하가격에서 전용부품이 차지하는 비중이 점차 높아지고 있으므로 휴대폰 카메라 모듈 기술에 대한 현황 및 시장 상황을 파악하여 카메라 모듈 기술의 사업화 전략에 활용하고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.29-33
• /
• 2001

The production of Secondary Non-ferrous Metals (SNM) is characterized by low investment, energy consumption and cost, less pollution as well as rather simple technology. In the past years, the SNM industry has seen relevantly rapid progress in China. Especially in the filed of clean hydrometallurgical treatment certain novel technologies for recovery and separation have successfully been elaborated, and a number of medium and small commercial plants established. On the basis of four common metals Cu, Al, Pb, Zn, and Ni, Co, this paper describes the status quo and progress of SNM industry in China, indicating that a lot of work should still be done in salvage of waste metals. It is recommended that measures for collecting and classifying SNM resource should be strengthened and the research on new technologies for scavenging such metals should be supported.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.90-93
• /
• 2013

RAM study has been used for various range of industry such as chemical, electronics, defense industry. Recently, in the offshore & shipbuilding industry, demand of owners to analysis risk has been increased. RAM study is a quantitative pointer to risk based design and provides effective method for improvements. This article shows the result of RAM study for LNG fuel supply system. The result provides information to improve design. This study shows how result of risk assessment affects the design of LNG fuel supply system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.1093-1096
• /
• 2005

As the opening of Korea Railroad Express on April 1, 2004, it has extended the transportation capacity of railroad, and decreased the time and moving cost. Railroad Express is industry composed of transportation, advanced technology, and grand project for synthetic plan. Hence, here now, as the anniversary of Railroad Express, we should analyze the overall effect of Korean Economy by KTX. relationship with other industry, social and cultural change. That is the key point what is the change during the year and how we catch the chance to develope the Korea Railroad for the national economy. The KTX has overcome the speed which the traditional railroad not been. But the Express has a weakness in searching of customer or goods. KTX is helped by electronics and telecommunications. so we need to find new industry in relation to KTX. And we should have open mind and vision for international railroad.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.886-890
• /
• 2003

This paper introduces the combined test results of the traction system for KHST(Korean High Speed Train: hereafter refer to KHST). The main purpose of this combined test is to verify the performance of the traction system that is designed to operate up to maximum 350km/h speed. Combined test system consists of a traction transformer, two AC-DC PWM converters, a PWM Inverter, two traction motors and flywheel system. Flywheel system represents equivalent model of the train inertia. Also traction control system and MASCON Interfaces are included. Various kinds of experiments are performed to prove total traction system performance and detail waveforms are described

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.253-254
• /
• 2020

High Voltage Direct Current (HVDC) 시스템은 고압 직류송전을 위한 시스템이다. 고압 직류 송전을 위해서는 전력변환기가 교류전력을 직류전력으로 변환해주어야 하는데, 최근에는 모듈형 멀티레벨 컨버터(Modular Multilevel Converter, MMC)가 많이 적용되고 있다. MMC는 다수의 서브모듈이 직렬로 구성되어 있으며 DC-link단에 대용량 커패시터가 없다. MMC의 심각한 사고 중에 하나는 DC측 전력케이블의 단락사고로 시스템에 따라서 수십 kA 정도의 사고전류가 AC측 CB(Circuit Breaker)가 열리기 전까지 수십 ms에서 수백 ms동안 흐른다. 만약 하프브릿지 회로의 서브모듈로 구성된 컨버터에 별도 보호장치가 없으면 단락전류는 서브모듈의 하단 다이오드를 통해서 흐르게 되어 소손되게 된다. 이를 방지하기 위해 단락전류를 바이패스(by-pass) 시키기 위한 별도의 사이리스터를 추가하는데 이 기기의 사양은 DC 단락 전류를 충분히 견딜 수 있어야 한다. 본 논문에서는 사이리스터의 서지 전류 내력을 평가하기 위해 사양을 분석하고 시뮬레이션과 실험을 통해서 검증하였다.

• ETRI Journal
• /
• 제45권6호
• /
• pp.982-995
• /
• 2023

Technological innovation generates products, services, and processes that can disrupt existing industries and lead to the emergence of new fields. Distributed ledger technology, or blockchain, offers novel transparency, security, and anonymity characteristics in transaction data that may disrupt existing industries. However, research attention has largely examined its application to finance. Less is known of any broader applications, particularly in Industry 4.0. This study investigates academic research publications on blockchain and predicts emerging industries using academia-industry dynamics. This study adopts latent Dirichlet allocation and dynamic topic models to analyze large text data with a high capacity for dimensionality reduction. Prior studies confirm that research contributes to technological innovation through spillover, including products, processes, and services. This study predicts emerging industries that will likely incorporate blockchain technology using insights from the knowledge structure of publications.

• 한국IT서비스학회지
• /
• 제13권3호
• /
• pp.165-181
• /
• 2014

This study proposes the accurate labor inducement coefficient (employment inducement coefficient/hiring inducement coefficient) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. To rewrite the inter-industry table of Korea, some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table published by the Bank of Korea, the output of software industry includes not only the pure software related output but also the output of non-software section due to the misclassification of the industry. This causes the output to become bigger than the actual output of software industry. Therefore, if the inter-industry table is not modified, the labor inducement coefficient would be overestimated too much. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the labor inducement coefficient to be over or underestimated. This study tries to correct these problems to get the more accurate labor inducement coefficient of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association (KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The followings are the labor inducement coefficient obtained when the output is divided into the pure software section (package software, and IT service) and non-software section. As of 2011, the employment inducement coefficients of pure software section, package software section and IT service of Korea were 8.616, 13.998, and 7.773 respectively while the labor inducement coefficients of pure software section, package software section and IT service of Korea were 7.979, 13.332, and 7.083, respectively.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.201-209
• /
• 2004

As the European Community's Directive on the Restriction of Hazardous Substances in Electrical and Electronic Equipment banning lead (Pb) in electronics products will take effect on July 1, 2006, most electronics manufacturers will be commencing with volume production of Pb-free components by the middle of 2004. Electrodeposited pure tin finishes on electronic components are a leading contender to replace the industry standard tin-lead. Commensurate with this shift will be a somewhat steep learning curve as manufacturers adapt a variety of equipment and processes to contend with the issues surrounding this critical, industry-wide material conversion. Since the electrodeposited finish directly influences the critical reliability characteristics of the component itself, the nature of the Pb-free component finish must be well characterized and understood. Only through a thorough examination of the attributes of the electroplated tin deposit can critical decisions be made regarding component finish reliability. This paper investigates the properties of electrodeposited tin that may have an effect on component reliability, namely, grain structure (size and shape), oxide formation, tin whisker formation, and solderability. Data will be presented from laboratory and production settings, with the objective being to enable manufacturers to draw their own conclusions regarding previously established perceptions and misconceptions about electrodeposited tin properties.

• 한국정보시스템학회지:정보시스템연구
• /
• 제9권1호
• /
• pp.61-86
• /
• 2000

CALS(Commerce At Light Speed) which originated in the early 1980's in the military sector is now an integral component in our global strategy to further heighten competitiveness. Through integration and streamlining of production, distribution, technical information and management, CALS will certainly lead the world out of these economically challenging times and into new global prosperity. However, not much effort have been focused on the development and diffusion issues of component technologies such as ERP/SCM(Enterprise Resourses Planning/supply Chain Management), PDM(Product Data Management), and BPR(Business Process Reengineering) related with the CALS in electronic industry. Therefore, the purpose of this study is to analyze the advancing status and to present suggestions for the development of the CALS in electronic industry. In order to achieve the purpose, the case study has been conducted using the questionaries on the end-users and the interviews on the managers in the CALS area. The case study cover 57 users of the CALS for the three outstanding electronics(L, S, and D Electronics) in Korea. The questionaries include five success measures and eleven diffusion factors for the component technologies such as ERP/SCM, PDM, and BPR. In summary, the CALS will serve as the bases for exciting corporated innovations and the common business framework which facilitates the realization of Virtual Enterprise and Electronic Commerce in the 21st century.