• 제목/요약/키워드: Electronic transport

검색결과 908건 처리시간 0.031초

위성 DMB와 ITS 서비스 수신을 위한 단일 급전 이중 대역 원형 패치 안테나 설계 (Design of a Single-Feed Dual-Band Circular Antenna for Reception of S-DMB and ITS Services)

  • 김영상;노승진;김남수;고진현;하재권
    • 한국전자파학회논문지
    • /
    • 제17권9호
    • /
    • pp.866-873
    • /
    • 2006
  • 본 논문에서는 단일 급전을 이용하여 위성 DMB(Digital Multimedia Broadcasting)와 ITS(Intelligent Transport Systems) 서비스를 수신할 수 있는 이중 대역 원형 패치 안테나의 구조를 제안하고, 실제 제작을 통하여 성능을 확인하였다. 제작한 이중 대역 안테나는 위성 DMB 대역과 ITS 대역에서 각각 90 MHz와 180 MHz의 -10 dB 대역폭을 갖고, 최소 반사 손실은 약 -35 dB와 -18 dB로 측정되었는데, 이는 시뮬레이션 결과와 잘 일치하였다. 그리고, 위성 DMB와 ITS 대역의 안테나 이득은 각각 2.3 dBi와 2.7 dBi를 얻었다.

F4-TCNQ 분자를 정공 수송층에 이용한 유기 발광 소자의 전기적 특성 향상 (Enhancement of Electrical Properties of Organic Light-Emitting Diodes Using F4-TCNQ Molecule as a Hole-Transport Layer)

  • 나수환;이원재
    • 한국전기전자재료학회논문지
    • /
    • 제30권11호
    • /
    • pp.717-721
    • /
    • 2017
  • We studied the performance enhancement of organic light-emitting diodes (OLEDs) using 2,3,5,6-fluoro-7,7,8,8-tetracyanoquinodimethane ($F_4-TCNQ$) as the hole-transport layer. To investigate how $F_4-TCNQ$ affects the device performance, we fabricated a reference device in an ITO (170 nm)/TPD(40 nm)/$Alq_3$(60 nm)/LiF(0.5 nm)/Al(100 nm) structure. Several types of test devices were manufactured by either doping the $F_4-TCNQ$ in the TPD layer or forming a separate $F_4-TCNQ$ layer between the ITO anode and TPD layer. N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD), tri(8-hydroxyquinoline) aluminum ($Alq_3$), and $F_4-TCNQ$ layers were formed by thermal evaporation at a pressure of $10_{-6}$ torr. The deposition rate was $1.0-1.5{\AA}/s$ for TPD and $Alq_3$. The LiF was subsequently thermally evaporated at a deposition rate of $0.2{\AA}/s$. The performance of the OLEDs was considered with respect to the turn-on voltage, luminance, and current efficiency. It was found that the use of $F_4-TCNQ$ in OLEDs enhances the performance of the device. In particular, the use of a separate layer of $F_4-TCNQ$ realizes better device performance than other types of OLEDs.

Bi0.48Sb1.52Te3의 열전특성에 대한 Pb 도핑 영향 (Effect of Pb Doping on the Thermoelectric Properties of Bi0.48Sb1.52Te3)

  • 문승필;김태완;김성웅;전우민;김진헌;이규형
    • 한국전기전자재료학회논문지
    • /
    • 제30권7호
    • /
    • pp.454-458
    • /
    • 2017
  • $Bi_2Te_3$-based alloys have been intensively investigated as active materials for thermoelectric power generation devices from low-temperature (< $250^{\circ}C$) waste heat. In the present study, we fabricated Pb-doped, p-type $Bi_{0.48}Sb_{1.52}Te_3$ polycrystalline bulks by using meltsolidification and spark plasma sintering techniques, and evaluated their thermoelectric transport properties in an effort to develop optimized composition for low-temperature power generation applications. The electronic and thermal transport properties of $Bi_{0.48}Sb_{1.52}Te_3$ could be manipulated by Pb doping. As a result, the temperature for a peak thermoelectric performance (zT) gradually shifted toward higher temperatures with Pb content, suggesting that thermoelectric power generation efficiency can be enhanced by controlled Pb doping.

기판온도 및 열처리온도에 대한 CdS 박막의 전기적 및 광학적 특성 (Dependence of the Electrical and Optical Properties of CdS Thin Films on Substrate and Annealing Temperatures)

  • 박기철;심호섭;김정규
    • 센서학회지
    • /
    • 제6권2호
    • /
    • pp.163-171
    • /
    • 1997
  • CSVT(close spaced vapor transport)증착시스템으로 태양전지의 창재에 적합한 CdS박막을 기판온도에 따라 증착하였으며, 실온에서 증착된 CdS박막을 온도를 변화시켜 가면서 열처리하였다. 증착 및 열처리후의 CdS박막의 구조적, 전기적 및 광학적 특성을 조사하였다. 증착조건에 무관하게 CdS박막들은 육방정계구조로 (002)면으로 기판에 수직으로 성장함을 확인하였다. 기판온도가 $25^{\circ}C$에서 $300^{\circ}C$까지 증가함에 따라 비저항은 $60{\Omega}cm$로 부터 $2{\times}10^{4}{\Omega}cm$로 단순증가하였으며 기판온도 $25^{\circ}C$에서 가시광영역에서의 광투과도가 80%정도로 가장 높았다. 열처리온도가 증가함에 따라 막내의 결정결함의 증가에 따라 비저항은 현저하게 증가하였으며 광투과도는 현저하게 감소하였다.

  • PDF

Eureka-147 DAB를 통한 멀티미디어 서비스의 효율적인 전송시스템 (Effective Transmission System of Multimedia Services using Eureka-147 DAB)

  • 나남웅;백선혜;홍성훈;이현;이봉호;이수인
    • 방송공학회논문지
    • /
    • 제8권1호
    • /
    • pp.72-79
    • /
    • 2003
  • DAB(Digital Audio Broadcasting)는 고품질의 오디오뿐만 아니라 멀티미디어 데이터 서비스를 제공할 수 있는 새로운 국제표준이다. 본 논문에서는 Eureka-147 DAB를 통해 멀티미디어 데이터를 효율적으로 전송하기 위한 방안으로 DAB의 다중화 구조와 MPEG-2와 MPEG-4 시스템 규격을 이용하여 미디어들 간의 동기화와 다중화 기능을 제공할 수 있는 전송프레임 구조를 제안하고, 실험을 통하여 각 프레임 구조에 대한 성능을 비교\ulcorner평가하였다. 특히 DAB의 다중화와 중복되는 MPEG 시스템의 기능을 제거하여 다중화프레임 구조의 효율성을 향상시키는 방안들을 제시하고, 이를 비교 분석하였다. 또한 구현한 시스템을 이용하여 멀티미디어 데이터를 다양한 환경의 채널을 통해 전송할 때 전송 오류의 영향을 측정하고 평가하였다.

Electronic properties of graphene nanoribbons with Stone-Wales defects using the tight-binding method

  • M.W. Chuan;S.Z. Lok;A. Hamzah;N.E. Alias;S. Mohamed Sultan;C.S. Lim;M.L.P Tan
    • Advances in nano research
    • /
    • 제14권1호
    • /
    • pp.1-15
    • /
    • 2023
  • Driven by the scaling down of transistor node technology, graphene became of interest to many researchers following the success of its fabrication as graphene nanoribbons (GNRs). However, during the fabrication of GNRs, it is not uncommon to have defects within the GNR structures. Scaling down node technology also changes the modelling approach from the classical Boltzmann transport equation to the quantum transport theory because the quantum confinement effects become significant at sub-10 nanometer dimensions. The aim of this study is to examine the effect of Stone-Wales defects on the electronic properties of GNRs using a tight-binding model, based on Non-Equilibrium Green's Function (NEGF) via numeric computation methods using MATLAB. Armchair and zigzag edge defects are also implemented in the GNR structures to mimic the practical fabrication process. Electronic properties of pristine and defected GNRs of various lengths and widths were computed, including their band structure and density of states (DOS). The results show that Stone-Wales defects cause fluctuation in the band structure and increase the bandgap values for both armchair GNRs (AGNRs) and zigzag GNRs (ZGNRs) at every simulated width. In addition, Stone-Wales defects reduce the numerical computation DOS for both AGNRs and ZGNRs. However, when the lengths of the structures increase with fixed widths, the effect of the Stone-Wales defects become less significant.

전자서류의 원본성에 대한 UCP 및 eUCP의 규정.판례에 관한 연구 (A Study on Provisions and Precedents about Original Electronic Documents in UCP and eUCP)

  • 장흥훈;박복재
    • 통상정보연구
    • /
    • 제7권1호
    • /
    • pp.213-233
    • /
    • 2005
  • A letter of credit is the best settlement among various means of payments until now. A letter of credit plays very important roles in rational and smooth international trade. Letter of credit is usually used in international trade. But many people have to prepare a lot of transport documents in order to transact with L/C. Therefore, the transactions will be happened to delay in international trade very often. Owing to the EDI, international trade will be materialized with electronic business of E-commerce. If we transact with the electronic documents, it will be reduced the time very much in international trade. Generally speaking, all relating parties transact with L/C complying with UCP, but there are no ruling articles about electronic documents in UCP. If all parties want to transact with electronic documents in global business, UCP has to contain the electronic provisions. So, ICC published eUCP on 2002. The purpose of the study was to analyze original electronic papers and provisions through foreign precedents in UCP and eUCP. If we want to exchange the electronic document, the UCP provisions about electronic documents would be revised as follows: UCP provision 20(b) would be revised, “Unless otherwise stipulated in the credit, banks have to accept as an original documents, a documents produced or appearing to have been produced: (i)by reprographic, automated or computerized systems (ii)as carbon copies,; provided that it is marked as original and, where necessary, appears to be signed. A document may be signed by handwriting, by facsimile signature, by perforated signature by symbol, or by any other mechanical or electronic method of authentication."

  • PDF

Congestion-Aware Handover in LTE Systems for Load Balancing in Transport Network

  • Marwat, Safdar Nawaz Khan;Meyer, Sven;Weerawardane, Thushara;Goerg, Carmelita
    • ETRI Journal
    • /
    • 제36권5호
    • /
    • pp.761-771
    • /
    • 2014
  • Long-Term Evolution employs a hard handover procedure. To reduce the interruption of data flow, downlink data is forwarded from the serving eNodeB (eNB) to the target eNB during handover. In cellular networks, unbalanced loads may lead to congestion in both the radio network and the backhaul network, resulting in bad end-to-end performance as well as causing unfairness among the users sharing the bottleneck link. This work focuses on congestion in the transport network. Handovers toward less loaded cells can help redistribute the load of the bottleneck link; such a mechanism is known as load balancing. The results show that the introduction of such a handover mechanism into the simulation environment positively influences the system performance. This is because terminals spend more time in the cell; hence, a better reception is offered. The utilization of load balancing can be used to further improve the performance of cellular systems that are experiencing congestion on a bottleneck link due to an uneven load.

Mercurous bromide $(Hg_2Br_2)$ crystal growth by physical vapor transport and characterization

  • Kim, S.K.;S.Y. Son;K.S. Song;Park, J.G.;Kim, G.T.
    • 한국결정성장학회지
    • /
    • 제12권6호
    • /
    • pp.272-282
    • /
    • 2002
  • Mercurous bromide ($Hg_{2}0Br_{2}$) crystals hold promise for many acousto-optic and opto-electronic applications. This material is prepared in closed ampoules by the physical vapor transport (PVT) growth method. Due to the temperature gradient between the source and the growing crystal region, the buoyancy-driven convection may occur. The effects of thermal convection on the crystal growth rate was investigated in this study in a horizontal configuration for conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. The results showed that the growth rate increases linearly with Grashof number, and for 0.2 $\leq$ Ar (transport length-to-height, L/H)$\leq$1.0 sharply for Ar=5 and $\Delta$T=30 K. We have also shown that the magnitude of convection decreases with the Ar. For gravity levels of less than $10^{-2}$g the non-uniformity of interfacial distribution is negligible.

기상이동법에 의해 제조된 ZnO 결정의 형상 및 발광 특성에 미치는 TiO 첨가의 영향 (Effect of TiO Addition on Morphologies and Luminescence Properties of ZnO Crystals Fabricated by Vapor Transport Method)

  • 이근형
    • 한국재료학회지
    • /
    • 제28권10호
    • /
    • pp.590-594
    • /
    • 2018
  • ZnO micro/nanocrystals are formed by a vapor transport method. Mixtures of ZnO and TiO powders are used as the source materials. The TiO powder acts as a reducing agent to reduce the ZnO to Zn and plays an important role in the formation of ZnO micro/nanocrystals. The vapor transport process is carried out in air at atmospheric pressure. When the weight ratios of TiO to ZnO in the source material are lower than 1:2, no ZnO micro/nanocrystals are formed. However, when the ratios of TiO to ZnO in the source material are greater than 1:1, the ZnO crystals with one-dimensional wire morphology are formed. In the room temperature cathodoluminescence spectra of all the products, a strong ultraviolet emission centered at 380 nm is observed. As the ratio of TiO to ZnO in the source material increases from 1:2 to 1:1, the intensity ratio of ultraviolet to visible emission increases, suggesting that the crystallinity of the ZnO crystals is improved. Only the ultraviolet emission is observed for the ZnO crystals prepared using the source material with a TiO/ZnO ratio of 2:1.