• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.43-55
• /
• 2003

최근 IT산업의 발달과 그에 따른 전자부품기술의 발전이 가속화됨에 따라, 전자부품의 경박 단소화 및 고성능에 대한 요구는 전자패키지 (electronic package) 및 반도체기판(PKG substrate) 업체들로 하여금 고밀도의 입출력(I/O)과 우수한 열적, 전기적 특성을 보유하면서 높은 양산수율로 제품이 가격경쟁력을 갖도록 유도하고 있다. 이러한 경향에 따라 세계적인 반도체 회사(chip-maker)들은 더욱 혹독한 조건의 신뢰성 표준을 마련하여 제반 산업에 전반적인 적용을 요구하고 있으며, 환경친화 및 고주파, 고성능의 특성을 지닌 새로운 소재를 개발하도록 촉구하고 있는 실정이다. 반도체기판은 구성소재에 따라 구현되는 특성의 범위가 매우 크므로 우수한 특성의 소재를 반도체기판에 적용할 때 고객의 요구조건에 충분히 만족시킬 수 있을 것으로 기대된다. 따라서, 기판업계에서는 우수한 특성을 나타내는 원자재의 개발 및 수급이 절실하게 되었으며 급변하는 원자재의 기술 동향에 대한 분석은 향후 전자패키지 및 기판제품의 경쟁력을 향상시킬 수 있을 것이므로 본 연구에서는 최신 반도체기판 원자재의 기술 동향과 원자재의 특성을 분석하고자 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.221-221
• /
• 2006

The SMD type P-N junction diode with ceramic package for diode case were fabricated. It was made this diode with simple process from $Al_2O_3$ ceramic chip, solder preform, diode chip, coating reagent and conductive paste for chip terrmination. Its merit is small size, easy manufacture. fast cooling with ceramic case. The electric characteristics of the diode such as reverse recovery time, breakdown voltage, forward voltage, and leakage current were 5 28ns, 1322V, 1.08V, $0.45{\mu}A$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.32-35
• /
• 2002

The work focuses on the development of a Cu lead-frame with a single-sided adhesive tape for cost reduction and reliability improvement of LOC (lead on chip) package products, which are widely used for the plastic-encapsulation of memory chips. Most of memory chips are assembled by the LOC packaging process where the top surface of the chip is directly attached to the area of the lead-frame with a double-sided adhesive tape. However, since the lower adhesive layer of the double-sided adhesive tape reveals the disparity in the coefficient of thermal expansion from the silicon chip by more than 20 times, it often causes thermal displacement-induced damage of the IC pattern on the active chip surface during the reliability test. So, in order to solve these problems, in the resent work, the double-sided adhesive tape is replaced by a single-sided adhesive tape. The single-sided adhesive tape does net include the lower adhesive layer but instead, uses adhesive materials, which are filled in clear holes of the base film, just for the attachment of the lead-frame to the top surface of the memory chip. Since thermal expansion of the adhesive materials can be accommodated by the base film, memory product packaged using the lead-flame with the single-sided adhesive tape is shown to have much improved reliability. Author allied this invention to the Korea Patent Office for a patent (4-2000-00097-9).

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.57-63
• /
• 2015

Recently, LED is widely used in the kinds of display devices or lighting. In this paper, we fabricated LED chamber light for naval vessels to replace to conventional chamber light using incandescent lamp. The LED package of chamber light was designed with luminous intensity of 5.5 cd, color temperature of $6,000{\pm}500K$, forward voltage of 3~3.2 V and input current of 60 mA. A LED module was composed of 36 LED packages and metal PCB. The VF and luminous intensity of LED package were getting down when temperature increased. The temperature of LED chamber light was measured by changing the number of LED package and applied current for one hour when an electric current flow. The heat transfer capability have been improved by using metal PCB. The power consumption of LED chamber light reduced by 86% compared to the conventional chamber light using incandescent lamp.

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.353-357
• /
• 1998

Cracking problem of Epoxy Molding Compound(EMC) is critical for the reliability of the plastic package during temperature cycling and IR-reflow condition. Fracture toughness of EMC, which is defined as the resistance of EMC to the crack propagation, is a useful factor in ht estimation of EMC against package crack. Thus, development of EMC having high fracture toughness at a given loading condition would be important for confirming the integrity of package. In this study, toughness of several EMC was measured by varying the test conditions such as temperature, loading speeds, and weight percent of filler in order to quantify the variation of toughness of EMC under various applicable conditions. It was found from the experiments that toughness of all EMC has following trends, i.e., it rapidly decreases over the glass transition temperature, remains almost same or little decreases below $0^{\circ}C$. It decreases with the growth of cross head speed in EMC and the weight percent of filler as the degree of brittleness of EMC increases with the amount of filler content.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.1-10
• /
• 2015

The light emitting diodes(LED) package of new structure is proposed to promote the reliability and lifespan by maximize heat dissipation occurred on the chip. We designed and fabricated the LED packages mixing the advantages of chip on board(COB) based on conventional metal printed circuit board(PCB) and the merits of Si sub-mount using base as a substrate. The proposed LED package samples were selected for the superior efficiency of the material through the sealant properties, chip characteristics, and phosphor properties evaluations. Reliability test was conducted the thermal shock test and flux rate according to the usage time at room temperature, high-temperature operation, high-temperature operation, high-temperature storage, low-temperature storage, high-temperature and high-humidity storage. Reliability test result, the average flux rate was maintained at 97.04% for each items. Thus, the Si sub-mount based LED package is expected to be applicable to high power down-light type LED light sources.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.315-316
• /
• 2009

본 논문에서는 1W 급 이상의 고출력 LED 용 패키지로서 세라믹 LTCC 적층 패키지의 방열 특성을 평가하고 열해석 결과와의 차이에 대해 고찰하였다. 특히, 세라믹 패키지의 방열 특성을 향상시키기 위해 Thermal Via와 Heat slug를 LED Chip 하단부에 위치시켰을 때 방열 특성을 평가하기 위해 Transient Thermal Test를 이용하여 각각의 경우에 대한 열저항을 평가하여 방열 특성의 항상 정도를 확인하였으며, 열해석 시뮬레이션을 통해 얻은 결과와 비교하였다. 평가 결과 Heat slug를 배치한 패키지가 열저항이 $8^{\circ}C/W$로서 가장 우수한 특성을 보여주었으며, 열해석 결과와의 차이에 대해서는 광출력으로 방출된 전력을 계산하여 보정함으로써 $1^{\circ}C$ 이하의 편차를 보여주는 결과를 얻을 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.221-224
• /
• 1998

Software release over the network is the most efficacious way of software update. Software release of electronic switching system, considering its environments, is the typical case that is in need of adopting the method. The media of transferring software and data of TDX-10A electronic switching system are magnetic tapes containing them, so the MT must be delivered between remotely placed office and package generation system. SMART-10A system provides the file tranfer on the data network between TDX-10A and the package generation system and ability of remote application of new software. This paper shows the implementation of file transfer between TDX-10A and computer system connected by data networks, status handling for duplicated system, and monitor process design with IPC on UNIX system.

• 한국전자통신학회논문지
• /
• 제9권8호
• /
• pp.883-888
• /
• 2014

시뮬레이션은 현대의 복잡한 환경에서 효율적인 의사 결정을 위한 도구로서 폭넓게 사용되고 있다. 하지만, 대부분은 결과의 분석 보다는 시뮬레이션 모델의 개발 및 수행에 중점을 두고 있다. 본 논문에서는 시뮬레이션 모델링은 물론 결과의 분석도 중요하고 체계적으로 진행되어야 한다는 점을 강조하고, 이를 위하여 통계분석과 다양한 데이터 조작 및 그래픽 기능을 가진 R을 사용하여 이윤 최적화 시뮬레이션에 대한 모델링과 결과 데이터의 조작 및 다양한 그래픽을 사용한 분석 작업을 수행하여 유용성을 입증하였다.

• 한국전자통신학회논문지
• /
• 제2권1호
• /
• pp.1-9
• /
• 2007

In this paper, a third-order harmonic mixer is designed using frequency multiplier theory for the Ka-band. The gate bias voltage is selected by frequency multiplier theory to maximize the third-order harmonic element ofthe fundamental LO frequency in the proposed mixer. The designed mixer has a gate mixer structure composed of a gate terminal input for the fundamental local signal ($f_{LO}$), RF signal (${RF}$) and a drain terminal output for the harmonic frequency ($3f_{LO}-f_{RF}$) respectively. The Ka-band harmonic mixer is designed and fabricated using a commercial GaAs MESFET device with a plastic package. The proposed mixer will provide a solution for the problems found in the high cost, complex circuitry in a conventional Ka-band mixer. The 33.5 GHz harmonic mixer has a -10 dB conversion gain by pumping 11.5 GHz LO with a +5 dBm level.