• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11b
• /
• pp.33-37
• /
• 2004

Photovoltaic energy and wind energy are highly dependent on the season, time and extremely intermittent energy sources. Because of these reasons, in view of the reliability the photovoltaic and the wind power generation system have many problems(energy conversion, energy storage, load control etc.) comparing with conventional power plant. In order to solve these existing problems, hybrid generation system composed of photovoltaic(500W) and wind power system(400W) was suggested But, hybrid generation system cannot always generate stable output due to the varying weather condition So, the auxiliary power compensation unit that uses elastic energy of spiral spring was added to hybrid generation system for the present study. It was partly confirmed that hybrid generation system was generated a stable outputs by spiral spring was continuously provided to load.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.278-282
• /
• 2012

Photovoltaic systems have emerged to be one of the cleanest energy systems. Therefore, many large scale solar parks and PV farms have been built to prepare for the post fossil fuel ages. However, due to their large scale, to efficiently manage and operate PV systems, they need to be visually monitored within the range of infrared ray through the Internet. To satisfy this need, the efficient implementation of a high performance video compression standard is required. This paper therefore presents an implementation of H.264 motion estimation, which is one of the most data-intensive and complicated functions in H.264. To achieve this, this work implements vector instructions in hardware and incorporates them in a generic RISC processor architecture, thus increasing the processing speed while minimizing hardware and software design efforts. Extensive simulation results show that this proposed implementation can process motion estimations up to 13 times faster.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.500-500
• /
• 2008

최근들어, 도시철도 전력설비에는 온라인 상태진단이 가능한 센서를 설치하여 각 기기의 상태를 상시 감시하는 시스템이 도입되고 있다. 이러한 기술이 적용됨으로써 전력설비의 교체 주기를 판단하고, 사고를 미연에 방지 하는 등의 최적의 관리를 할 수 있게 되었다. 그러나 운영기관에 따라 다양한 방법의 진단설비가 설치되어 있어 유지보수가 어려워, 도시철도에 적합한 진단시스템의 개발이 요구되어 지고 있다. 도시철도 주요 전기설비로는 변압기, 단로기, 차단기, 정류기 등이 있다. 현재 이를 진단하기 위한 방법으로는 각 장치에 따라 부분방전시험, 유전정접시험, 절연유분석시험, 차단기동작시험 등이 있다. 본 연구에서는 현재 국내 외에서 제시되고 있는 전기설비의 온라인 상태진단 기술을 조사하고, 상용화된 온라인 상태진단 시스템을 분석하여 도시철도 전기설비에 적용 가능한 상태진단 항목과 상태진단 기법을 조사, 분석하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.624-628
• /
• 2013

With the recent development of less-costly uncooled detector technology, expensive optics are among the remaining significant cost drivers in the thermography camera. As a potential solution to this problem, the fabrication of IR lenses using chalcogenide glass has been studied in recent years. We report on the molding and evaluation of a ultra-precision chalcogenide-glass lens for the thermography camera for body-temperature monitoring. In addition, we fabricated prototype thermography camera using the chalcogenide-glass lens and obtained the thermal image from the camera. In this work, it was found out that thermography camera discerned body-temperature between 20 and $50^{\circ}C$ through the analysis of thermal image. It is confirmed that thermography camera using the chalcogenide-glass lens is applicable to the body-temperature monitoring system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.411-414
• /
• 2014

복지 정책의 일환으로 거동이 불편한 고령자와 장애인에게 전동 휠체어의 보급이 늘어나고 있다. 그러나 사용의 편리성에 비해 유지관리가 매우 불편하다는 사용자들의 불만이 많이 제기되고 있다. 특히 전동 휠체어의 배터리의 충전 및 정비 운영관리 문제와, 현재 야외에서의 휠체어가 운행하는데 도로상황이 좋지 않아 많은 위험성을 내포하고 있다. 이에 휠체어 및 위치와 같은 주위 상황을 실시간으로 모니터링하여 위험 상황이 발생시 즉각적인 대처가 가능하도록 하는 시스템이 필요하다. 본 논문에서는 이러한 불편을 미연에 방지하고 전동 휠체어의 효율적인 관리가 가능한 배터리 및 위치정보를 실시간 모니터링하는 시스템을 제안한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.548-549
• /
• 2007

과거 PCB 제조의 주된 화제는 다양한 산업분야의 발전을 위해 한정된 시간 안에 좀 더 많은 PCB를 양산하는 기술 개발에 집중되어 있었지만, 현재는 비정상적인 공정 상태를 파악함으로써 제조 공정 환경에서의 오류를 줄여 전체 수률을 높이는 방법에 시선을 돌리고 있다. PCB 에칭의 경우 에칭 용액의 상태를 실시간으로 모니터링 하는 것이 중요하다. 본 논문에서는 기존 애칭용액의 상태를 판단할 때 사용되는 ORP 센서 대신, RGB 센서를 이용하여 실시간으로 용액의 상태를 모니터링 할 수 있는 시스템을 개발 하였다. 개발된 시스템을 이용하여 기존 ORP 시스템과의 비교 분석을 및 RGB 센서률 이용한 모니터링 방법이 ORP 센서를 이용한 방법 보다 좀 더 쉽고 정확하게 에칭 액의 상태를 모니터링할 수 있다는 것을 확인 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.194-195
• /
• 2007

This paper presents the experimental operation of invertactive 50kW photovoltaic system for monitoring periods. Form these performance monitoring results, the PV system performance has been evaluated and analyzed for component perspective. It has produced a regression equation. Using the equation, it is possible to estimate the annual electricity generation. The result of this study will be used to determine the appropriate capacity of PV system in different systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.500-501
• /
• 2007

Automation systems for higher performance and efficiency in railway electrification systems are driving ever more demanding needs for new condition monitering systems which can consist of sensors connected to the substation and catenary systems. This paper reviews the recently developed condition monitering system, based on a IP network-based multi-agent system, wireless communications and sensor networks for railway electrification system. A new concept for information management, condition monitoring and control of power transmission are considered as railway automation in electrification system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.75-78
• /
• 2000

This paper is estimated to enhance yield improvement and device reliability using PDM(plasma damage monitoring) system capable of in-suit detection about plasma nonuniformity. PDM Tool is the non-contact method of wafer and surface potential electrode(kelvin probe). Its tool measures Vox(oxide barrier) with charge created by plasma. It's possible to inspect the wafer damage generated by plasma charge and analysis of in-situ monitoring data. we obtained the good data which is continuously prevented from plasma damage using its tool for 10weeks. This tool is contributed to preventive steps contemporaneously inspecting the difference of inter-chamber.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.214-217
• /
• 2017

AlSb is a promising material for optical devices, particularly for high-frequency and nonlinear-optical applications. We report the effect of growth temperature on structural properties of AlSb grown on GaAs substrate. In particular we studied the surface of AlSb with the growth temperature by atomic force microscopy, and concluded that optimized growth temperature of AlSb is $530^{\circ}C$. We also show the result of real-time monitoring of AlSb growth by in situ ellipsometry. The results of the structural study are good agreement with the previous reported ellipsometric data.