• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1724-1729
• /
• 2007

Smaller size and higher integration of electronic systems make narrower interconnect pitch not only in chip-level but also in package-level. Moreover electronic systems are required to operate in harsher conditions, that is, higher current / voltage, elevated temperature/humidity, and complex chemical contaminants. Under these severe circumstances, electronic components respond to applied voltages by electrochemically ionization of metals and conducting filament forms between anode and cathode across a nonmetallic medium. This phenomenon is called as the Electrochemical migration

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.248-251
• /
• 2014

As more vehicles become equipped with advanced electronic control systems, more consideration is needed with regards to automotive safety issues related to the effects of electromagnetic waves. Unwanted electromagnetic waves from the antenna, electricity and other electronic devices cause the performance and safety problem of automotive components. In general, Power Integrity and Signal Integrity analysis have been widely used, but these analyses have stayed PCB level. PCB base analysis is different from radiated emission TEST condition so its results are used just for reference. This paper proposes EMC optimization technology using module level 3-dimensional radiation simulation process closed to fundamental test conditions. If module level EMC analysis, which is proposed in this study, is applied to all automotive electronics systems, unexpected EMC noise will be prevented.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5S
• /
• pp.1629-1637
• /
• 2000

With wide spending the Internet and Web techniques, we have recognized the necessary and commercial-value of electronic commerce system. Electronic commerce(EC) means the whole economical activities based on electronic medium. Both scalability and flexibility are fundamental attributes of EC system and interoperability among heterogeneous systems must be supported. So, for successful a developing of EC system, it is necessary to apply the CBD (Component Based Development) based on component assembling and customization. In this paper, we propose the method for identifying and specifying the components to construct the component based electronic commerce system. To do, we define the component/system architecture specified on EC domain, identified and classified the EC components with hierarchy relationship. Also, we suggested the specification notation and some examples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.135-138
• /
• 2002

VCO(Voltage Controlled Oscillator) is one of the main components governing the size, performance and power consumption of telecommunication devices. As the devices become much smaller, VCO need to have much smaller size with better characteristics. Buried type passive components of L,C,R were developed previously and the structure of these components are good for minimizing the size of VCO. Our own library of passive components is used in simulation and fabrication of VCO circuit, and surface mounted components like varactor diode are analysed using the measurement circuit designed by ourselves. Two-Dimensional simulation of VCO circuit and local three-Dimensional structure simulation are performed and their relation is obtained. In structure of multi-layered VCO, some components governing the characteristics of VCO are selected and placed on the top of oscillator for the good tuning process. In resonator part, the stripline structure and low loss glass/ceramic material are used to get higher Q value. In our research, a VCO oscillates in the 2.3∼2.36 GHz band is developed.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.2
• /
• pp.144-153
• /
• 2003

This study was carried out to determine the relationship between smoke components and sensory evaluation by changes tobacco leaf blending. Seven different cigarettes were made by adding different types of oriental, reconstituted and expanded tobacco leaves. 62 kinds of smoke components which were 6 of general components, 34 of semi-volatile and volatile components, 9 of acid components, and 13 of phenolic components were analyzed. Eight kinds of sensory item were evaluated and also electronic nose system data was collected. All smoke components and sensory characteristics of mainstream smoke were changed by the different blending. To determine the relationship between smoke components and sensory test, the correlation and regression analysis were carried out by using SPSS statistical program. Tar, pH, and CO showed a high correlation with sensory evaluation item. As tar related to hotness, CO have a high correlation with offensive aroma. Semi-volatile and volatile components of smoke related to sensory characteristics such as aroma, taste, irritation, hotness and smoothness. When propylene, l,3-butadiene, butane, isoprene, and 2-methylfuran showed a high correlation with aroma; methyl chloride, methanol, toluene, ethyl benzene showed a high correlation with irritation. Some acidic components and phenolic components of smoke also had a high relation to smoke volume. Especially the acidic components such as 2-furoic acid, 2-hydroxybutyric acid, phenylacetic acid and palmitic acid; the phenolic components such as 4-vinyl phenol, pyrocatechol, 3-methyl catechol, hydroquinone showed a high correlation with smoke volume. As using regression analysis, it was possible to estimate the results of sensory evaluation from the smoke analysis data. From the results of electronic nose system analysis, we can find the different pattern by adding expanded tobacco leaf.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.187-191
• /
• 2016

The objective of this study was to analyze the volatile compounds in rice under various milling degrees using a mass spectrometry-based electronic nose and discriminant function analysis (DFA). Less volatile components were more frequently found in rice with a lower milling degree. Milling degree resulted in a shift of DF1 to the left side of the DFA plot. This indicated that the DF1 scores were correlated with the milling degree of rice. Brown rice was found to have more volatile components regardless of the milling degree. Thus, rice prepared at different milling degrees could be effectively discriminated with electronic nose analysis. Moreover, more volatile components were detected with an increase in storage time. A slight change in volatile components was found with an increase in the milling degree. The electronic nose could predict the milling degree and storage time of rice.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.313-313
• /
• 2008

Aerosol Deposition(AD) method is based on the impact consolidation phenomenon of ceramic fine particles at room temperature. AD is promising technology for the room temperature deposition of the dielectrics thin films with high quality. Embedding of passive components such as capacitors into printed circuit board is becoming an important strategy for electronics miniaturization and device reliability, manufacturing cost reduction. So, passive integration using aerosol deposition. In this study, we examine the effects of the characteristics of raw powder on the thickness, roughness, electrical properties of $BaTiO_3$ thin films. Thin films were deposited on the copper foil and copper plate. Electrical and material properties was investigated as a change of annealing temperature. We final aim the effects of before and after of laminated on the electrical properties and suit of embedded capacitor.

• Journal of Ginseng Research
• /
• v.47 no.3
• /
• pp.353-358
• /
• 2023

Sepsis and septic shock affect millions of people worldwide each year with high clinical mortality rates. At present, basic research on sepsis has emerged in an endless stream, but there are few effective clinical translation results. Ginseng, a medicinal and edible representative of Araliaceae plants, contains a variety of biologically active compounds including ginsenosides, alkaloids, glycosides, polysaccharides, and polypeptides. Neuromodulation, anticancer activity, blood lipid regulation, and antithrombotic activity have been linked to ginseng treatment. At present, basic and clinical research have suggested various applications of ginseng in sepsis. In view of the different effects of various ginseng components on the pathogenesis of sepsis, and in order to further understand and develop the possible value of ginseng in sepsis, this manuscript reviews the application of various components of ginseng in the treatment of sepsis in recent years.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.861-863
• /
• 2003

In this work, the preparations and characteristics of capacitors and inductors for RF IC as a integrated devices are investigated. These kinds of capacitors and inductors can be applicable to the passive components utilized in voltage controlled oscillator(VCO), low noise amplifier(LAN), mixer and synthesizer for mobile telecommunication of radio frequency band(900 MHz to 2.2GHz), and in a library of monolithic microwave integrated circuit(MMIC). The results show that these inductors and capacitors array for RF IC may be applicable to the RF IC passive components for mobile telecommunication.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.39-44
• /
• 2017

This paper proposes a novel approach to determine symmetrical components of power system by applying method of least squares in time domain. For the modern power system stability, clearance of faults on high voltage transmission lines in zero response time is crucial and important. Symmetrical components have a great attention since last century. They have been found an effective tool for the analysis of symmetrical and unsymmetrical faults in power system. Moreover, magnitude of symmetrical components are also used as a caution about faults in system. With rapid changes in technology, Microprocessor assumed to be fastest machine of the modern era. Hence microprocessor based techniques were developed and implemented for last few decades. The proposed technique apply least square method in the computation of symmetrical components which is suitable as an application in microprocessor based monitoring and controlling power system in order to avoid cascading failures. Simulation of proposed model is carried out in MATLAB/SIMULINK and all results exploit the validity of model.