• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.499-509
• /
• 2009

Electric vehicles (EV) are developing fast during this decade due to drastic issues on the protection of environment and the shortage of energy sources, so new technologies allow the development of electric vehicles (EV) by means of electric motors associated with static converters. The proposed propulsion system consists of two induction motors (IM) that ensure the drive of the two back driving wheels. The electronic differential system ensures the robust control of the vehicle behavior on the road. It also allows controlling, independently, every driving wheel to turn at different speeds in any curve. This paper presents the study of an hybrid Fuzzy-sliding mode control (SMC) strategy for the electric vehicle driving wheels, stability improvement, in which the fuzzy logic system replace the discontinuous control action of the classical SMC law. Our electric vehicle fuzzy-sliding mode control's simulated in Matlab SIMULINK environment, the results obtained present the efficiency of the proposed control with no overshoot, the rising time is perfected with good disturbances rejections comparing with the classical control law.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.222-229
• /
• 2009

A noble infrared sensor was studied for passenger conditional detection in vehicle, This research relates to uncooled infrared sensors for detecting the presence, type and temperature of occupants in vehicle. It sense that the occupants purpose to control the smart airbag for safety in the case of adult or child and to control the automatic air conditioning for convenience. This paper described the design and the fabrication of microbolometers which were composed of 2 by 8 elements using the surface micromachining technology. The characteristics of the array were investigated in the spectral region of $8{\sim}12{\mu}m$. The fabricated detectors exhibited the thermal mass of $7.05{\times}10^{-9}\;J/K$, the thermal conductance of $1.03{\times}10^{-6}\;W/K$, the thermal time constant of 6.8 ms, the responsivity of $2.96{\times}10^4\;V/W$ and the detectivity of $1.01{\times}10^9\;cmHz^{1/2}/W$, at the chopper frequency of 10 Hz and the bias current of $4.4{\mu}A$. We could successfully detect the human body condition in the divided zone. As a results, we concluded that microbolometer optimized in this research could be useful for the application of passenger conditional detection in vehicle.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.471-478
• /
• 2011

This paper addresses the establishment of a kVA-range plug-in hybrid electrical vehicle (PHEV) integration test platform and associated issues. Advancements in battery and power electronic technology, hybrid vehicles are becoming increasingly dependent on the electrical energy provided by the batteries. Minimal or no support by the internal combustion engine may result in the vehicle being occasionally unable to recharge the batteries during highly dynamic driving that occurs in urban areas. The inability to sustain its own energy source creates a situation where the vehicle must connect to the electrical grid in order to recharge its batteries. The effects of a large penetration of electric vehicles connected into the grid are still relatively unknown. This paper presents a novel methodology that will be utilized to study the effects of PHEV charging at the sub-transmission level. The proposed test platform utilizes the power hardware-in-the-loop (PHIL) concept in conjunction with high-fidelity PHEV energy system simulation models. The battery, in particular, is simulated utilizing a real-time digital simulator ($RTDS^{TM}$) which generates appropriate control commands to a power electronics-based voltage amplifier that interfaces via a LC-LC-type filter to a power grid. In addition, the PHEV impact is evaluated via another power electronic converter controlled through $dSPACE^{TM}$, a rapid control systems prototyping software.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1647-1654
• /
• 2013

실외 도로에서의 차량 검출 성능은 기상 상태, 태양 이동에 의한 그림자, 조도 변화 등에 영향을 받는다. 본 논문에서는 낮 시간대의 실외도로에서 이러한 주변 환경변화에 강건한 배경 추정 알고리즘과 연동한 차량 검출 시스템을 제안한다. 배경 추정 알고리즘은 혼합 가우시안 모델을 적용하고 후보 영역에 대한 차량 검출은 Adaboost 알고리즘을 적용하였다. 흐린 날, 비오는 날 등 동일한 실제 도로에서 서로 다른 기후에 획득한 CCTV 비디오 영상을 사용한 실험을 통해 제안하는 방법이 일반 도로에서의 차량 검출에 유용한 것을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.451-459
• /
• 2018

This work presents an approach for modeling of electric vehicle considering the vehicle dynamics, drive train, rotational wheel and load dynamics. The system is composed of IPMSM (Interior Permanent Magnet Synchronous Motor) coupled with the wheels through a drive train. Generally, IPMSM is controlled by ordinary PID controllers. Performance of the ordinary PID controller is not satisfactory owing to the difficulties of optimal gain selections. To overcome this problem, a new type of fuzzy logic gain tuner for PID controllers of IPMSM is required. Therefore, in this paper fuzzy logic based gain tuning method for PID controller is proposed and compared with some previous control techniques for the better performance of electric vehicle with an optimal balance of acceleration, speed, travelling range, improved controller quality and response. The model was developed in MATLAB/Simulink, simulations were carried out and results were observed. The simulation results have proved that the proposed control system works well to remove the transient oscillations and assure better system response in all conditions.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1398-1404
• /
• 2009

This paper proposes a vehicle speed detector with anisotropic magnetoresistive (AMR) sensors and addresses experimental results to show the performance of the detector. The detector consists of two AMR sensors and mechanical and electronic apparatuses. The AMR sensor senses disturbance of the earth magnetic field caused by a vehicle moving over the sensor and then produces an output indicative of the moving vehicle. In this paper, vehicle speeds are calculated by using two AMR sensors built on a board. The speed of a vehicle is calculated by dividing the known distance between the two sensors with the time difference between two output signals from each sensor, captured sequentially while the vehicle is driving over the sensors. Some field tests have been carried to show the performance of the proposed detector and its usefulness.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.39-46
• /
• 2006

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.1018-1022
• /
• 2011

Nowadays, with improvement of economical income and life qualities, life pattern changes have been brought such as increasing of avocational activities. Consequently, following those life trends, utilization of car is getting increased. Thus, the perceptions of car have been changed from the only means of transport in the past to a 2nd residental space. that is why the car's endo environmental factors are getting so important. Air conditioner regulating air ventilization in vehicle's indoor automatically sets the right temperature based on the differences of indoor and outdoor's temperature with development of advanced functions to provide better environmental qualities in vehicle. However, even those advanced techniques for functional development are got so diverse though, the essential technique for preventing the growth of bateria and mold inside of the air conditioner are not even severals. Especially, evaporator one of the vehicle air conditioning equipments generates cooled air by vaporizing refrigerant in liquid state with the water as the adduct for this reactions. It has structural difficulties for water vaporation then cause the growth of germs. That's why this reseach was focused on the way of eliminating germs in the vehicle air conditioner efficiently. Direct air sterilizer by using UVC(Ultraviolet C) is manufactured and that performances are evaluated.

• 전자공학회논문지S
• /
• 제35S권9호
• /
• pp.43-52
• /
• 1998

본 논문에서는 능동형 샤시 시스템이 정착된 차량의 안정성(Stability), 조종성(Handling) 및 승차감(Ridecomfort)을 향상시키기 위한 새로운 통합제어기를 설계한다. 하이브리드 퍼지논리 제어기는 퍼지논리 제어기, 스카이 훅 제어기, 자세 제어기 및 롤 모멘트 분포 제어기로 이루어지며, 차량의 주행상태에 기초한 통합제어로직을 이용하여 위와 같은 제어기들을 적절히 결합시켜 사용한다. 또한 MATRIXx/SYSTEMBBUILD 소프트웨어를 이용하여 16자유도 차량모델에 대하여 시뮬레이션을 수행함으로써 차량의 승차감, 조종성 및 능동적 안전도가 향상됨을 확인한다.

• 융합보안논문지
• /
• 제16권6_2호
• /
• pp.99-107
• /
• 2016

이 연구의 목적은 Bluetooth를 활용한 자동차의 내부망 통신네트워크를 해킹공격으로부터 예방하기 위한 대응방안을 제시하기 위함이다. 이를 위해 2장에서는 자동차 통신네트워크의 정의와 내부망 통신네트워크의 종류에 대해서 살펴보았다. 3장에서는 자동차 내부망 통신네트워크 해킹위험성을 분석하기 위해 Bluetooth에 의한 해킹범죄사례를 살펴보았다. 4장에서는 본 연구의 결과로서 첫째, "자동차안전기준에 관한 규칙" 개정이 이루어져야 한다. 동법에서는 전자제어시스템의 정의 및 기준사항과 안전운행을 위한 제작 및 정비를 규정해 놓았음에도 불구하고 전자제어시스템을 대상으로 한 해킹범죄 예방 및 방어와 관련된 보안프로그램 혹은 펌웨어 등의 제작과 관련된 규정이 없는 실정이다. 둘째, 자동차의 전자제어시스템 기술의 복잡성에 기인된 자동차 통신네트워크를 보호하고자 자동차 통신네트워크 보호 법률이 신설되어야 한다.