• 제목/요약/키워드: Electronic Tag

검색결과 236건 처리시간 0.025초

Low-Power 512-Bit EEPROM Designed for UHF RFID Tag Chip

  • Lee, Jae-Hyung;Kim, Ji-Hong;Lim, Gyu-Ho;Kim, Tae-Hoon;Lee, Jung-Hwan;Park, Kyung-Hwan;Park, Mu-Hun;Ha, Pan-Bong;Kim, Young-Hee
    • ETRI Journal
    • /
    • 제30권3호
    • /
    • pp.347-354
    • /
    • 2008
  • In this paper, the design of a low-power 512-bit synchronous EEPROM for a passive UHF RFID tag chip is presented. We apply low-power schemes, such as dual power supply voltage (VDD=1.5 V and VDDP=2.5 V), clocked inverter sensing, voltage-up converter, I/O interface, and Dickson charge pump using Schottky diode. An EEPROM is fabricated with the 0.25 ${\mu}m$ EEPROM process. Power dissipation is 32.78 ${\mu}W$ in the read cycle and 78.05 ${\mu}W$ in the write cycle. The layout size is 449.3 ${\mu}m$ ${\times}$ 480.67 ${\mu}m$.

  • PDF

저 전력 능동형 RFID 기반 대기 전력 제어 모듈 설계 및 구현 (Design and Implementation of Standby Power Control Module based on Low Power Active RFID)

  • 장지웅;이경훈;김영민
    • 한국전자통신학회논문지
    • /
    • 제10권4호
    • /
    • pp.491-497
    • /
    • 2015
  • 본 논문에서는 능동형 RFID 방식의 태그와 리더로 구성된 대기 전력 제어 모듈을 설계하고 구현한다. 태그와 리더는 C8051 MCU와 CC2500으로 구성된 RF모듈을 내장하고 있으며 리더에는 대기 전력 제어 콘센트가 부착되어 있다. 리더는 송신 패킷 인식 여부에 따라 릴레이를 제어한 후 전원 공급을 차단하여 대기 전력으로 소비되는 전력을 감소시키며 저 전력 패킷 예측 알고리즘이 적용되어 태그와 리더의 전력 소모를 낮추었다. 실험 결과, 리더의 패킷 송, 수신 여부에 따라 대기 전력 제어 콘센트의 릴레이를 동작시켜 대기 전력을 제어할 수 있음을 확인하였다. 또한 RSSI값에 따라 태그와 리더 사이의 동작 거리 설정이 가능하며, 콘센트의 대기 시간 동안 리더에서 작동하는 수신 Duty Cycle을 설정함으로써 리더에 소모되는 전력을 절감할 수 있음을 확인하였다.

인식 음영 구역을 제거한 RFID 태그 안테나 설계 (Design of Tag Antenna without Shadow Zone in Readable Pattern)

  • 조치현;추호성;박익모
    • 한국전자파학회논문지
    • /
    • 제16권12호
    • /
    • pp.1206-1212
    • /
    • 2005
  • 본 논문에서는 전기 전류와 자기 전류를 동시에 생성하여 인식 음영 구역을 제거할 수 있는 새로운 형태의 RFID 태그 안테나를 설계하였다. 변형된 이중 T 매칭 네트워크를 이용하여 상용 태그 칩을 안테나에 공액 정합을 시켜, 848${\~}$926 MHz의 넓은 대역폭($S_{11}< -10 dB$)과 $90\%$ 이상의 높은 복사 효율을 얻었다. 제안한 안테나는 동작 주파수 부근에서 최대 이득과 최소 이득의 차이가 약 4 dB로 유사 등방성 복사 패턴을 가지며, 상용 태그칩을 장착하여 인식 거리를 측정한 결과 태그의 방향과 무관하게 1.7${\~}$2.4 m의 고른 인식 능력을 보였다.

능동형 RFID시스템에서 태그 인식 속도 향상을 위한 고속 태그 충돌 방지 알고리즘 (High-Tag anti-collision algorithm to improve the efficiency of tag Identification in Active RFID System)

  • 이한영
    • 한국전자통신학회논문지
    • /
    • 제7권2호
    • /
    • pp.235-242
    • /
    • 2012
  • 현재 RFID 시스템에서 해결하여야 할 가장 큰 문제 중 하나는 태그간의 충돌로 인해 인식 효율이 떨어진다는 것이다. 기존의 충돌 방식 중 BS 충돌 방지 알고리즘 방식은 구현이 간단하다는 장점이 있으나, 태그 수가 많아짐에 따라서 태그간 충돌에 의해 전체 태그를 읽는데 요구되는 단계별 스케줄 횟수가 증가하는 단점을 가지고 있다. 본 논문에서는 이 문제를 해결하기 위해서 충돌 예상을 최소화 하기 위해 사전에 '0'과 '1'의 결정 비트를 통해 복수의 응답 프레임(MF)을 제안한 방식을 제안하였다. 시뮬레이션 결과 복수 응답 프레임 (MF) 알고리즘은 기존의 알고리즘보다 30~50% 성능이 향상됨을 보인다는 것을 알 수 있었다.

RF를 이용한 전자 개체 인식 장치 개발 (Development of Electronic Identification Unit Using RF)

  • 조성인;류관희;안광재;김유용;유윤관
    • Journal of Biosystems Engineering
    • /
    • 제27권5호
    • /
    • pp.459-466
    • /
    • 2002
  • In Korea, a need of automatic dairy farm management system has been increased to lower production cost and to strengthen international competition. However, the present management system was mostly relied on foreign technologies and caused some problems in post management and after-sales services. Therefore, though there is a problem of price and quality at present, domestic technologies of the management system should be developed for the long run. This study was conducted to develop an electronic identification unit for an automatic dairy farm management system. The developed system was consisted of a tag, a reader, a switching circuit, and a personal computer. The tag attachable to each individual cow was developed to transmit individual radio frequency(RF) code into the air with modulation of ASK(amplitude shift keying). And the switching circuit was added to avoid confusion on reception and transmittance. The reader attached to a feeding device was developed to transmit activating signal periodically and to identify code of the individual tag when the tag was approached to the device. The reader was consisted of an active filter, a detecter, a comparator and a microcontroller. The test result was feasible enough to apply it for the automatic farm management system and the identified maximum distance was about 37cm.

A Wireless Identification System Using an Efficient Antenna Based on Passive Surface Acoustic Wave(SAW) Devices

  • Chang, Ki-Hun;Lee, Woo-Sung;Yoon, Young-Joong;Kim, Jae-Kwon;Park, Joo-Yong;Burm, Jin-Wook
    • Journal of electromagnetic engineering and science
    • /
    • 제7권1호
    • /
    • pp.12-16
    • /
    • 2007
  • A UHF band wireless identification system based on passive surface acoustic wave(SAW) devices is presented in this paper. SAW ID tags were fabricated on Y-Z $LiNbO_3$ piezoelectric substrate with a good electro-mechanical coupling property. To reduce degradation of the antenna performance associated with the piezoelectric materials, an efficient design of the SAW RFID antenna is introduced. By measuring the parameters of the SAW ID tag, the performance of the antenna was tested by experimentation.

RFID Emulator를 이용한 Tag 인식거리 시험 연구 (The study of RFID Tag read range test with RFID Emulator)

  • 주해종;김영춘;이의수;조문택
    • 한국산학기술학회논문지
    • /
    • 제12권10호
    • /
    • pp.4536-4542
    • /
    • 2011
  • RFID 기술은 사물에 부착된 태그로부터 전파를 이용하여 사물의 정보 및 주변 환경을 인식하여 각 사물의 정보를 수집, 저장, 가공, 추적함으로써 사물에 대한 측위, 원격 처리, 관리 및 사물간 정보 교환 등 다양한 서비스 영역 적용에 가능하다. 또한, 다양한 서비스가 활성화 되기 위해서는 RFID Tag 성능 시험이 중요하다. 하지만 RFID 국제 시험 환경을 구성하기 위한 RFID에뮬레이터기술을 보유하고 있는 국내 업체가 드물고, 국제 표준에서 요구 하는 정확한 RFID 시험 기준 및 요구 사항을 인식하고 있는 RFID Tag 제조업체 또한 많지 않은 실정이다. 따라서 본 논문에서는 EPCglobal 또는 ISO/IEC에서 요구 하는 시험 환경 구성 및 시험 방법을 제시 하고 RFID 성능 시험 항목중 우선시 되는 RFID 인식거리 시험 방안을 제시하여 RFID Tag의 제품의 품질을 검증 하고, 시장에서는 검증된 제품을 활용한 RFID시스템 구축 및 서비스 활성화를 촉진할 수 있도록 하고자 한다.

Design of a Flexible Planar RFID Tag Antenna with Low Performance Degradation from Nearby Target Objects

  • Choo, Jae-Yul;Ryoo, Jeong-Ki;Choo, Ho-Sung
    • Journal of electromagnetic engineering and science
    • /
    • 제11권1호
    • /
    • pp.1-4
    • /
    • 2011
  • In this letter, we propose a novel tag antenna that has low performance degradation with nearby dielectric material. We obtained a stable reading performance and a broad matching bandwidth on nearby dielectric materials by employing a T-matching network with thick line width and capacitively slot-loaded arms. We then built the proposed antenna and measured the tag sensitivity to examine the reading characteristics with nearby dielectric materials. The measured results clearly demonstrate stable tag sensitivity with various nearby dielectric materials, such as foam, acrylic-plastic, glass, and ceramic plates. To more closely observe the antenna characteristics with nearby dielectric materials, we also examined the impedance variation and surface current distribution with respect to the dielectric constant of nearby target objects, which ranged from $1{\times}{\varepsilon}_0$ to $16{\times}{\varepsilon}_0$.

이동형 리더의 프라이버시를 보호하는 안전하고 효율적인 RFID 태그 검색 프로토콜 (A Secure and Efficient RFID Tag Search Protocol Protecting Mobile Reader's Privacy)

  • 최현우;여돈구;장재훈;염흥열
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권9호
    • /
    • pp.109-117
    • /
    • 2010
  • 최근 들어, 특정 RFID 태그들의 그룹 내에서 원하는 태그를 찾기 위한 RFID 태그 검색 시스템에 대한 연구가 활발히 진행되고 있다. RFID 태그 검색 시스템은 물류 및 재고 관리를 비롯하여 미아 찾기, 범죄자의 전자발찌 등 다양한 분야에서 응용될 수 있다. 안전한 RFID 태그 검색 시스템의 구현을 위해서는 태그 추적 문제와 리더 소지자의 프라이버시 문제 등과 같이 다양한 보안 위협들을 고려하여 프로토콜을 설계해야 한다. 기존에 제안된 RFID 태그 검색 프로토콜들은 몇몇 보안 요구사항을 만족시키지만, 리더 소지자의 프라이버시 문제를 해결하지 못했고, 리더 소지자의 프라이버시 문제를 해결했다 하더라도 암호화 연산을 이용하였기 때문에 연산량 측면에서 많은 부하를 가져오게 했다. 따라서 본 논문에서는 리더 소지자의 프라이버시 문제를 해결하면서도 효율적으로 동작하는 RFID 태그 검색 프로토콜을 제안한다.

딥러닝을 이용한 이미지 레이블 추출 기반 해시태그 추천 시스템 설계 및 구현 (Design and Implementation of Hashtag Recommendation System Based on Image Label Extraction using Deep Learning)

  • 김선민;조대수
    • 한국전자통신학회논문지
    • /
    • 제15권4호
    • /
    • pp.709-716
    • /
    • 2020
  • 소셜 미디어에서 일반적으로 게시물을 올릴 때 이미지의 태그 정보를 사용하는데, 태그를 이용하여 주로 검색이 이루어지기 때문이다. 사용자는 태그를 게시물에 붙임으로써 게시물을 많은 사람들에게 노출시키길 원한다. 또한, 사용자는 게시물과 함께 태깅될 태그를 붙이는 행위를 번거롭게 여겨 태깅하지 않은 게시물도 올리게 된다. 본 논문에서는 입력 이미지와 유사한 이미지를 찾아 해당 이미지에 부착된 레이블을 추출하여 그 레이블이 태그로 존재하는 인스타그램의 게시물들을 찾아 게시물 속 존재하는 다른 태그들을 추천해주는 방법을 제안한다. 제안하는 방법에서는 CNN(Convolutional Neural Network) 딥러닝 기법의 모델을 통하여 이미지로 부터 레이블을 추출하여 추출된 레이블로 인스타그램을 크롤링하여 레이블 외의 태그를 정렬하여 추천해준다. 추천된 태그를 이용하여 이미지를 게시하기도 편해지고, 검색의 노출을 높일 수 있고, 검색오류가 적어 높은 정확도를 도출할 수 있음을 알 수 있다.