• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.171-171
• /
• 2006

In this presentation, we would like to report an inkjet printing method to produce 1 to 2 bit RFID tag working in the range of 6 to 28 MHz with or without transistors. The inkjet printing method especially for the formation of transistors, inductors, capacitors will be presented by the view of polymer chemistry. This presentation also includes the printing schemes for memory cell, ring oscillator, rectifier, antenna, and so forth for constructing RFID tag. I illustrate these strategies by describing recent my works on the formation of all SWNT-TFT and conducting polymer-silver nanocomposite inks that can be applied in the construction of electronic devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.601-604
• /
• 2010

In this study, the piezoelectric energy harvester was investigated employing the pillar structure with the diameter size of 50~500 um. Usually, the aspect ratio between the height and diameter was related with the piezoelectric performance. High aspect ratio was showed the low electric noise and high piezoelectric properties than low aspect ratio. Therefore, we have selected the Su-8 photo-resist and modified lithography process to manufacture the pillar structure with height above the 250 ${\mu}m$. In this presentation, we will report the process and properties of micro pillar structure based on the PMN-PZT (Pb$(Mg_{1/3}Nb_{2/3})O_3$-PbZrTiO$_3$) materials.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.144-147
• /
• 2006

A proportional intergral (PI) control strategy is commonly used for constant current and extinction angle control in a HVDC (High Voltage Direct Current) system. A PI control strategy is based on a stactic design where the gains of a PI controller are fixed. Since the response of a HVDC plant dynamically changes with variations in the operation point a PI controller performance is far from optimum. The contribution of this paper is the presentation of the design of a rough set based, fuzzy adaptive control scheme. Experimental results that compare the performance of the adaptive control and PI control schemes are also given.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.301-302
• /
• 2006

Load effect which occurs due to the electrode structure for PDP(plasma display panel) can seriously reduce the image quality of PDP. In this paper, we propose the method of reducing load effect in presentation images, which have the possibility of load effect, by using LUT(look-up table). The proposed method enhances the image quality of PDP by correcting load effect region of the still image.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.340-343
• /
• 2002

We report here our recent progress in the development and commercialization of polyfluorenes emitting red, green and blue (ROB) colors as materials for light emitting diodes (LEDs). Our patented version of the Suzuki coupling process has been used to synthesize a variety of fluorenebased homopolymers and copolymers emitting colors across the entire visible spectrum. The optical and electronic properties of the polymers are tailored through selective incorporation of different aromatic units into the polyfluorene backbone. Our latest green emitter, reported herein, provides very efficient devices with a low turn-on voltage of 2.25 V, a peak efficiency of 10.5 Cd/A at 6,600 Cd/$m^2$ at 4.85 V. These devices maintain an efficiency of greater than 10 Cd/A up to 50,000 Cd/$m^2$ and demonstrate very good stability as exemplified by a device half-life of greater than 1,500 hours starting from 1,100 Cd/$m^2$. Considerable progress has also been made with red and blue emitters and will be the subject of this presentation.

• Smart Media Journal
• /
• v.11 no.10
• /
• pp.30-35
• /
• 2022

Previous studies in various medical specialties have shown that fewer than 50% of abstracts presented at meetings are subsequently published, but only a few studies have been performed in pediatric dentistry. The purpose of this study was to investigate the rate of publication of articles based on abstracts presented at the Korean Academy of Pediatric Dentistry (K.A.D.P) spring and fall Congress for 2001 to 2011. The abstracts for both oral and poster presentation were collected. A RISS search was then performed to identify the publication of full-length articles based on those titles of the abstracts. A total of 706 abstract presentations were done at the 24 meetings (477 as oral presentation, 229 as poster presentations). Of these, from 45.2%(319) in 2011 to 82.9%(585) in 2022 was subsequently published. The publication ratio for orally presented abstracts was from 52.2%(249) in 2011 to 86.6%(413) in 2022, poster presentations from 30.6%(70) in 2011 to 75.1%(172) in 2022. We suggest that presenters at these meetings should expand their abstracts into full manuscripts and seek to publish them in peer-reviewed journals for the benefit of the profession. We believe that the results of changes in the publication rate over the past 12 years are attributable to the digitalized environment such as electronic literature search and electronic publication.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.90-90
• /
• 2012

The electron/hole injections in organic electronic devices have long been an issue due to the large energy level mismatches between electrode and organic layer. To utilize the organic materials in electronic devices, functional thin layers have been used, which reduce the electron/hole injection barrier from electrode to organic material. Typically, inorganic compounds and organic molecules are used as an electron and hole injection layer, respectively. Recently, CsN3 and 1,4,5,8,- naphthalene-tetracarboxylic-dianhydride (NTCDA) are reported as a potential electron and hole injection layers. CsN3 shows unique properties that it breaks into Cs and N and thus Cs can dope organic layer into n-type. On the other side, hole injection anode, NTCDA forms gap states with anode material. In this presentation, we show the electronic structure changes upon the insertion of CsN3 and NTCDA at proper interfaces to reduce the charge injection barriers. These barrier reductions are correlated with device characteristics.

• International Commerce and Information Review
• /
• v.4 no.2
• /
• pp.13-26
• /
• 2002

본 논문에서는 eUCP에서 전자자료 제시의 기준과 심사기준을 중심으로 연구하였다. 전자자료 제시의 장소, 제시의 방법에 대한 기준과 제시시기 및 전자제시에 대한 인증에서 발생하는 문제점을 제기하고 심사기간의 기준과 하이퍼링크방식의 전자자료에 대한 심사기준, 훼손된 전자기록에 대한 심사기준을 분석하였으며, 전자가록의 거절의 방법과 그에 대한 응답에 관련된 내용을 분석하였다. 전자제시의 문제점으로서 표준양식의 문제, 전자제시자의 면책의 문제, 환어음 유통성의 문제, 서류 심사기간, 인증기관과 방법에 관한 문제에 대하여 분석하여 해결방안을 제시하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.737-739
• /
• 1998

This presentation describes an experiment to intergrated control, protection and measurement system configulation at KOWACO's Yongdam hydro-power station currently constructed by discrete electronic and electromechenical devices. The experiment is designed to exploit existing microcomputer technologies, digital signal processors, m/w&fiber optic communications. The theory of operation and advantages of the intergrated approach are discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.7-7
• /
• 2009

This presentation will introduce Merck's investments for business to support the future market growth as "trendsetter contributor". As the world's oldest phamaceutical & chemical company, Merck has made the seamless investment for innovation. The investment for the new technologies is being continued for new LC materials, OLED material, organic electronic materials for flexible display, more environment friendly products of cell Etching Solutions to Solar Cell makers and variety of high-efficiency phosphors for LED applications. These investment portfolio is well in line with future business environment driving for eco-friendly, thin, fast, low power consumption."