• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.11
• /
• pp.1574-1580
• /
• 2009

To evaluate the effect of different housing systems on sow behavior, 80 gilts were randomly allocated at puberty to four treatments: i) sow stall in gestation followed by farrowing crate (SC), ii) group housing with individual feeding in gestation followed by farrowing crate (GC), iii) ESF (Electronic Sow Feeding) system in gestation followed by farrowing crate (EC), and iv) ESF system followed by group farrowing pen (EG). Behavioral observations were carried out on a total of 16 animals per treatment at the following stages: first day of allocation to housing treatment, day of service, 80 days after service, 109 days after service on entry to farrowing accommodation, 24 h before farrowing, day of farrowing, 14, 27 and 28 days after farrowing, at weaning. On each occasion, individual animals were observed for a 24 period with one minute time sampling. There were significant differences (p<0.001) between stages of the reproductive cycle for all the behavior patterns in all treatments. On the first day in experimental housing treatments, sows spent more time rooting and dog-sitting. Activity and investigatory behavior decreased as pregnancy progressed. An activity peak was apparent just before farrowing, followed by a high level of inactivity on the day of farrowing. Time spent active, eating and drinking increased as lactation progressed, and greatest activity and locomotion was seen immediately following weaning. There were significant differences between housing treatments (p<0.01) for standing, moving, eating, drinking, dog-sitting and lying. During pregnancy SC sows spent more time standing, rooting, drinking and dog sitting, while EC sows spent less time rooting and drinking and more time lying. During lactation, GC sows spent more time standing, moving and eating, less time dog sitting and lateral lying. Nursing frequency was reduced in GC sows (p<0.001). The maternal and piglet behaviors were influenced strongly by environment during lactation. However, it was also shown that previous housing history can influence the maternal behavior in the pre-farrowing stage and during early lactation.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.412-417
• /
• 2011

A series of homobinuclear complexes of the type [$M_2L(NO_3)_n(H_2O)_m$] where M=$UO_2$(VI), ZrO(IV), Th(IV); L=3-benzylidine-imino-5-p-sulphonamido phenyl azo-2-thiohyatoin(bispt), 3-furfurylidine-imino-5-p-sulphonamido phenyl azo-2-thiohydantoin(fispt),3-pyridyl-2'-methylene-imino-5-p-sulphonamido phenyl azo-2-thiohydantoin(pmispt) and 3-thienyl-2'-methylene-imino-5-p-sulphoanamido phenyl azo-2-thiohydantoin(tmispt); n=8 for Th(IV) and 4 for others, m=4 for bispt and 3 for others have been synthesized and characterized on the basis of elemental analysis, thermal analysis, molar conductance, magnetic moment and spectroscopic data (IR, electronic and $^1H$-NMR). In the light of this information, the ligands can be visualized as tetradentate co-ordinating through azomethine nitrogen, carbonyl oxygen to one metal centre where as azo nitrogen and thioimido nitrogen to the other metal centre yielding homo binuclear complexes of the above composition. The fungi toxicity of the ligands & their zirconyl complexes against some fungal pathogen has been studied.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.482-488
• /
• 1997

Copper recovery from waste water of electronic industry has been conducted effectively in a fluidized bed reactor. Initial concentration of copper in the waste water, liquid flow rate in the reactor, reaction temperature and time and current density between the cathode and anode in the reactor have been selected as operating variables. The effects of operating variables on the recovery of copper have been studied. It has found that the copper resolved in the waste water can be recovered continuously by means of a fluidized bed reactor The recovery of copper decreased with an increase in the initial concentration of copper in the waste water, while it increased with increasing reaction time and current density, however, it exhibited its maximum value with the variations of liquid flow rate and reaction temperature. The optimum reaction condition to maintain the copper recovery around 85% is as follows ; $X_o=3wt%$, $U_L=0.5cm/s$, $T=25^{\circ}C$, $I=7A/dm^2$ and t=2hrs within this experimental condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.131-134
• /
• 2005

PDP 방전 셀의 최적화 및 진공자외선 발광효율을 향상시키기 위한 목적으로 AC - PDP 미소방전에서 제논 여기종 원자의 밀도를 측정하는 레이저 흡수법을 개발하였다. 본 연구에서는 PDP 셀의 기체 압력을 350Torr, 제논 함량 10%로 고정하고, 전극 위에서의 여러 위치에서 준안정 준위 제논의 밀도를 흡수법으로 측정하였다. 실험 결과 제논 여기종의 밀도의 최대값은 전극의 위치(가장자리에서 안쪽으로의 거리)가 $50{\mu}m$, $120{\mu},\;150{\mu}m$ 일 때 $3.5{\times}10^{12}cm^{-3}$, $2.8{\times}10^{12}cm^{-3}$, $2.2{\times}10^{12}cm^{-3}$로 나타났다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.155-166
• /
• 2016

It is important to configure capacitance(C) of the capacitor and the induction coefficient(L) of the work coil on the resonant circuit design stage in order to induce heating on the object by a precise and constant frequency components in the electromagnetic induction heating equipment. Work coil conducts a direct induction heating according to heating point and area of the object which has a fixed heat factor so that work coil is designed to has fixed value. On the other hands, Capacitor should be designed to be changed in order to be the higher the utilization of the entire equipment. It is extracted the samples by variation of single electrode capacity from the selection stage of raw materials for capacity to the stage of process design for output of the high frequency LC resonance of 700kHz on 1000 VAC maximum voltage and current to $200I_{MAX}$. It is suggested fundamental experiment results in order to prove relation for the optimal design of HF-LC resonance conduction-cooled capacitor based on the response of frequency characteristics and results of output parameters according to variation of the capacitance size.

• Journal of Animal Science and Technology
• /
• v.49 no.2
• /
• pp.257-268
• /
• 2007

This study was carried out to investigate the quality comparison of M. longissimus from 4 crossbred wild boars(wild boar ♂×Duroc ♀, 113kg, 1 barrow and 3 gilts, CWB) reared outdoor, 5 Korean native black pigs(64kg, 5 barrows, KNP) and 5 modern genotype pigs(Landrace×Yorkshire×Duroc, 114kg, 5 barrows, MGP) reared indoor. The samples were stored at 2±0.2℃ for 12 days and utilized in the quality measurement. The moisture content was significantly higher in CWB than in KNP(p<0.05), however crude fat content was significantly lower in CWB than in KNP(p<0.05). The pH value of CWB was significantly lower than that of MGP during 12 days of storage(p<0.05). Therefore the CWB showed significantly lower water-holding capacity than MGP(p<0.05). The L*, a*, b* and C* values of CWB were significantly lower than those of KNP during 12 days of storage(p<0.05), however those of CWB were significantly higher than those of MGP after 3 and 6 days of storage(p<0.05). In fatty acid composition, the CWB had higher unsaturated fatty acid including linoleic acid, arachidonic acid and lower saturated fatty acid. However, the lipid oxidation of CWB was delayed during storage compared with KNP and MGP. The aroma patterns by principal component analysis(PCA) from electronic nose was discriminately different among 3 different pork at 0 and 12 day of storage.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.11-19
• /
• 2016

A fundamental study to recycle a Si-Sludge and waste copper nitrate solution acid solution generated by domestic electronic industries was carried out. The waste copper nitrate solution was used as the lixiviant to leach the metals like Cu, Ca, Fe, etc. from the sludge leaving Si in the residues. The effect of reaction temperature, time and pup density on the metals leaching from the sludge was investigated. To enhance the extractability of Fe, the effect of HCl, $HNO_3$ and $H_2O_2$ introduced additionally during the leaching was also examined. Considering the leaching efficiency of Fe along with Cu, the leaching conditions comprising of 200 ~ 225 g/L pulp density and $90^{\circ}C$ temperature for 30 min were optimized. Under this condition, 98.27 ~ 99.17% Cu could be dissolved in the leach liquor with the obtained purity of Si in the residues as 98.69 ~ 98.86 %. The study revealed that the leaching of Cu contained in the Si-Sludge with the waste copper nitrate solution is a plausible approach by which the obtained leach liquor can further be treated suitably to recover Cu as the high pure value-added products.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.49-54
• /
• 2023

The Global Positioning System (GPS) was developed for military purposes and developed as it is today by opening civilian signals (GPS L1 frequency C/A signals). The current satellite orbits the earth about twice a day to measure the position, and receives more than 3 satellite signals (initially, 4 to calculate even the time error). The three-dimensional position of the ground receiver is determined using the data from the radio wave departure time to the radio wave Time of Arrival(TOA) of the received satellite signal through trilateration. In the case of navigation using GPS in recent years, a location error of 5 to 10 m usually occurs, and quite a lot of areas, such as apartments, indoors, tunnels, factory areas, and mountainous areas, exist as blind spots or neutralized areas outside the error range of GPS. Therefore, in order to acquire one's own location information in an area where GPS satellite signal reception is impossible, another method should be proposed. In this study, IMU(Inertial Measurement Unit) combined with an acceleration and gyro sensor and a geomagnetic sensor were used to design a system to enable location recognition even in terrain where GPS signal reception is impossible. A method to track the current position by calculating the instantaneous velocity value using a 9-DOF IMU and a geomagnetic sensor was studied, and its feasibility was verified through production and experimentation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.972-978
• /
• 2008

Antioxidant compounds and activities were investigated for both northern (Uiseong) and southern ecotype (Namhae) domestic garlic stems. The contents of chlorophyll, carotenoid, vitamin C, phenolic compounds and allicin in garlic stems were measured. Antioxidant activities of methanol and ethanol extracts of garlic stems were compared determining lipid peroxidation on the linoleic acid system, electronic donating ability (EDA), superoxide dismutase (SOD)-like activity and nitrite scavenging ability (NSA). The amounts of chlorophyll, carotenoid, phenolic compounds and allicin in northern ecotype were significantly higher, but vitamin C content was lower than those of southern ecotype garlic stems. The allicin contents of garlic stems and garlic bulbs were $26.1{\pm}1.0{\sim}28.2{\pm}0.9$ and $33.2{\pm}0.7{\sim}33.5{\pm}0.8\;mg%$, respectively. All antioxidant activities were higher in methanol extracts of garlic stems than in ethanol extracts and were higher with northern ecotype than those with southern ecotype extract. The SOD-like activity of garlic stem extract was higher than that of garlic bulbs while EDA, lipid peroxidation and NDA of garlic stem extracts were lower than those of garlic bulbs. Antioxidant activities of garlic stems were more than 50% of garlic bulbs.

• Journal of the Korean Magnetics Society
• /
• v.16 no.4
• /
• pp.197-200
• /
• 2006

Amorphous alloys of Co-rich magnetic amorphous films are well known as thpical soft magnetic alloys. They are used for many kinds of electric and electronic parts such as magnetic recording heads, transformers and inductors. CoFeHfO thin films were prepared by RF magnetron reactive sputtering. The films were deposited onto Si(100) substrates with a power of 300 W at room temperature. The reactive gas was introduced up to 10% ($O_2$/(Ar + $O_2$)) during deposition, and the $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ thin film exhibit excellent soft magnetic properties : saturation magnetization ($4{\pi}M_s$) of 19kG, magnetic coercivity ($H_c$) of 0.37 Oe, anisotropy field ($H_k$) of 48.62 Oe, and an electrical property is also shown to be as high as 300 ${\mu}{\Omega}cm$. It is assumed that the good soft magnetic properties of $Co_{39}Fe_{34}Hf_{9.5}O_{17.5}$ thin film results from high electrical resistivity and large anisotropy field.