• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.2
• /
• pp.99-105
• /
• 2007

MANET(Mobile Ad-hoc network) have recently attracted a lot of attention in the research community as well as in industry. Although the previous research mainly focused on various of MANET in routing, we consider, in this paper, how to efficiently support applications such as variable geocasting basd on MANET. The goal of a geocasting protocol is deliver data packet to a group of nodes that are located within a specified geocasting region. Previous research that support geocast service in mobilie computing based on MANET have the non-optimization problem of data delivery path, overhead by frequent reconstruction of the geocast tree, and service disruption problem. In this paper, we propose the mobility pattern based geocast technique using variable service range according to the mobility of destination node and resource reservation to solve this problem. The experimental results show that our proposed mechanism has improved performance of Accessibility & Network Overhead than previous research.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.2
• /
• pp.79-88
• /
• 2018

Managing pain and anxiety in patients has always been an essential part of dentistry. To prevent pain, dentists administer local anaesthesia (LA) via a needle injection. Unfortunately, anxiety and fear that arise prior to and/or during injection remains a barrier for many children and adults from receiving dental treatment. There is a constant search for techniques to alleviate the invasive and painful nature of the needle injection. In recent years, researchers have developed alternative methods which enable dental anaesthesia to be less invasive and more patient-friendly. The aim of this review is to highlight the procedures and devices available which may replace the conventional needle-administered local anaesthesia. The most known alternative methods in providing anaesthesia in dentistry are: topical anaesthesia, electronic dental anaesthesia, jet-injectors, iontophoresis, and computerized control local anaesthesia delivery systems. Even though these procedures are well accepted by patients to date, it is the authors' opinion that the effectiveness practicality of such techniques in general dentistry is not without limitations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.437-440
• /
• 2000

In this study, the interfacial dielectric breakdown phenomenon of interface between Epoxy and Rubber was discussed, which affects the stability of insulation system of power delivery devices. The breakdown strength of specimens are observed by applying high AC voltage at the room temperature. The breakdown times under the constant voltage below the breakdown voltage were gained. As constant voltage is applied, the breakdown time is proportion to the breakdown strength. The life exponent n is gained by inverse power law and the long time breakdown life time can be evaluated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.607-611
• /
• 2000

The characteristics on the interface between Epoxy and EPDM which are materials of the underground insulation systems of power delivery have studied. The breakdown strength of specimens are observed by applying high AC voltage at the room temperature. The breakdown times under the constant voltage below the breakdown voltage were gained. As constant voltage is applied the breakdown time is proportion to the breakdown strength. The life exponent n is gained by inverse power law and the long breakdown life time can be evaluated. AC breakdown strength and life time is improved by oiling to the interface. When the low viscosity oil is spread interface has the highest life time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.47-47
• /
• 2007

Indium oxide conducting films were dep9sited on Si(100) substrates at various temperatures by liquid delivery metal organic chemical vapor deposition using Indium (III) tris (2,2,6,6-tetramethyl-3.5-heptanedionato) $(dpm)_3$ precursors. The films deposited at $200{\sim}400^{\circ}C$ were grown with a (111) preferred orientation and exhibit an increase of grain size from 21 to 33nm with increasing deposition temperature. In the range of deposition temperature, there is no metallic indium phase in deposited films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.533-534
• /
• 2006

In this paper we propose a new model of a mini-pump with peristaltic motion and present the results of the finite element analysis of an electromagnetic micro actuator. The mini-pump consists of three diaphrams made of PDMS, three permanent magnets in cylinders, printed copper coils on glass substrates, and input and output port. The size of the mini-pump is $14\;{\times}\;40\;{\times}\;5.4$ mm3 and the permanent magnet diameter 6.2 mm $\times$ thickness 2 mm. The electromagnetic force applied on the magnet was about 0.84 N when the current of coils was 1 A, then the maximum displacement of the PDMS diaphram was about 2mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.517-518
• /
• 2006

In this paper, to understand the effect of forest fires on polymer insulators for transmission lines, it was observed the aging of the housing surface of the polymer insulators. And, this paper shows the way how to create the artificial field testing in order to simulate forest fire. As the results of, maximum leakage current peaks by influence of flame increased from 1[mA] to 1.4[mA], and SEM results show the inorganic component on the housing surface because the organic component matters disappeared. Therefore, the case of exposed by forest fire, polymer insulator can be used in the early stage, but an exchange needs active countermeasure to be stabilize power delivery.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.3
• /
• pp.51-55
• /
• 2000

It is automation of manufacturing process that improve productivity, quality level and delivery times in manufacturing environment. Epoxy injection process is very critical process of manufacturing electronic lighter and then controling the quantity of epoxy fluid is another critical factor of them. As development of epoxy injection machine, the product goal is accomplished and maximize the profit of company. The object of this study is implement the mathematical equation to practical examination with this machine.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.8-15
• /
• 2020

The diffusion cell method is the main technique employed for the in vitro diffusion test of transdermal drug delivery preparations. Most existing transdermal diffusion devices use a water bath heating structure and direct current motor magnetic stirrer. However, these devices are confronted with problems, such as large volume, incompatible vertical and horizontal diffusion cells, few diffusion cell sets, and poor reliability. To overcome these deficiencies, the system adopts a dry heating method and uses a rotating magnetic field generated by the electromagnetic stirrer to drive the magnetic stirrer. Accordingly, the resulting device is characterized by a simple structure and small volume, convenient operation, compatible vertical and horizontal diffusion cells, and numerous diffusion cell sets. The reliability and practicability of the system is verified by the in vitro percutaneous permeability test of the bisoprolol patch.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1546-1549
• /
• 2020

This paper introduces the development process of mobile home CCTV that enables remote control and object recognition using unused smartphones and Arduino. Clients can control motors connected to Arduino through button, enable bidirectional voice communication between client-server and receive video from the server in real time. The server sends a PUSH notification to the client when its battery is low. When the server recognizes the charger, the client's remote control allows the server to dock to the charger and charge it. It was confirmed that video and voice delivery between client and server works well without any problems, and that object recognition works smoothly.