• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.8
• /
• pp.57-66
• /
• 2000

Add-drop filtering effect of a asymmetric fiber-optic coupler ADF(add/drop filter) is analyzed using a new split-step time-domain model. This model is very useful in simulating the devices containing a directional coupler an Bragg gratings, First, a symmetric fiber-optic coupler ADM is analyzed using this model to confirm the accuracy of the new method. Then, an asymmetric fiber-optic coupler ADF is analyzed, and some design parameters for optimal filtering effect is derived.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.24-30
• /
• 2016

The study to obtain tantalum concentration from electronic components (ECs) on Printed circuit board assembly (PCBA) of laptop was conducted. Electronic components on laptop PCBA were detached from boards by using self-developed experimental apparatus. The detached electronic components were sieved and 93.2 wt.% of tantalum capacitors were concentrated from the size interval from 2.80 mm to 6.35 mm. The tantalum capacitors were pulverized by hammer mill and electrodes (anode and cathode) were removed from the grinding products by using magnetic separators under the magnetic force of 300 Gauss. Finally, tantalum concentrate was concentrated from the magnetic separator products by using Knelson concentrator, and the maximum efficiency of 76.9% was achieved under the operating condition of bowl rotating speed of 200 rpm, and fluidizing water flowrate of 7 L/min. The grade and recovery of Ta concentrate under the condition were 81.1% and 78.8%, respectively.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.139-145
• /
• 2022

The study aimed to build a proposed program for training Social Studies teachers in the light of electronic functional competencies, the researcher used the experimental method with a quasi-experimental design, the study sample consisted of (37) Social studies teachers in Ismailia. A proposed program in the light of electronic functional competencies. A measure of awareness of the dimensions and components of electronic feasibility. The study concluded several results: There is a statistically significant difference at the level of (a ≤0.01) between the average scores of the teachers of the research group in the pre and post measurements of the measure of awareness of the dimensions and components of electronic functional competencies in favor of the teachers scores in the post-measurement. Training Social studies teachers on the functional electronic competencies necessary for them to keep up with educational developments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.768-771
• /
• 2003

The impulse between launch vehicle and atmosphere can generate a lot of noise and vibration during the process of launching a satellite. Structurally, electronic equipment (KOMPSAT 2, RDU : Remote Drive Unit) of a satellite consists of aluminum case containing PCB (Printed circuit boards). Each PCB has resistors and IC (Integrated circuits). Noise and vibration of wide frequency band are transferred to the inside of fairing, subsequently creating vibration of the electronic equipment of the satellite. In this situation. random vibration can cause malfunctioning of the electronic equipment of the device. Furthermore, when tile frequency of random vibration meets with natural frequency of PCB. fatigue fracture nay occur in the part of solder joint. The launching environment, thus. needs to be carefully considered when designing the electronic equipment of a satellite. In general. the safety of the electronic equipment is supposed to be related to the natural frequency, shapes of mode and dynamic deflection of PCB in the electronic equipment. Structural vibration analysis of PCB and its electronic components can be performed using either FEM(Finite Element Method) or vibration test. In this study. the natural frequency and dynamic deflection of PCB are measured by FEM, aud the safety of the electronic components of PCB is being evaluated according to the results. This study presents a unique method for finite element modeling and analysis of PCB and its electronic components. The results of FEA are verified by vibration test. The method proposed herein may be applicable to various designs from the electronic equipments of a satellite to home electronics.

• Journal of Information Technology Applications and Management
• /
• v.15 no.4
• /
• pp.61-76
• /
• 2008

As XBRL applications for sharing the contents and semantics of business reports get activated, it is increasingly necessary to reuse components systematically by the standardization in the national level. The current standardization of Korean electronic documents follows the "Guideline for XML Documents Development", which aims to maximize the reusability of components by providing a business library as well as the UN/CEFACT core components methodology. XBRL takes the same approach with the standardization of electronic documents in that their components (concepts and their structures) are defined using XSD. In XBRL, however, concept are restricted to specific types and diverse relationship types can be defined for associating the concepts to themselves and other additional information. As a result, there are some issues that may not be solved by just applying the guideline to XBRL. This paper presents a basic method for applying the methodology to XBRL applications in order to realize the systematic reusing and standardization of XBRL documents in the national level. For case analysis, FSS (Financial Supervisory Service) income statement is employed to demonstrate the possibility of the method.

• Korean Journal of Materials Research
• /
• v.18 no.9
• /
• pp.507-510
• /
• 2008

Electrical properties of multi-channel metal-induced unilaterally precrystallized polycrystalline silicon thin-film transistor (MIUP poly-Si TFT) devices and circuits were investigated. Although their structure was integrated into small area, reducing annealing process time for fuller crystallization than that of conventional crystal filtered MIUP poly-Si TFTs, the multi-channel MIUP poly-Si TFTs showed the effect of crystal filtering. The multi-channel MIUP poly-Si TFTs showed a higher carrier mobility of more than 1.5 times that of the conventional MIUP poly-Si TFTs. Moreover, PMOS inverters consisting of the multi-channel MIUP poly-Si TFTs showed high dynamic performance compared with inverters consisting of the conventional MIUP poly-Si TFTs.

• Journal of the Korean Society of Radiology
• /
• v.9 no.5
• /
• pp.301-306
• /
• 2015

X-ray can be applied to obtain a projection image of an object. It is not easy to obtain an high quality image for the object composed of low and high density materials. For the object with large difference in density, it is possible to realize high contrast image using images of low and high tube voltages and image processing. The plastic and metalic parts of the electronic components can be imaged by the dual energy technique which use low and high tube voltages and by processing pixel-by-pixel using visual C++. The contrast-enhanced image can be used to detect and observe defects within the electronic components.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.61-64
• /
• 2000

We fabricated and characterized Low Noise Amplifier (LNA) using MCM-C (Multi-Chip-Module-Cofired) technology for 2.14 GHz IMT-2000 mobile terminal application. First, We designed LNA circuits and simulated it's high frequency characteristics using circuits simulator. For the simulation, we adopted high frequency libraries of all the devices used in LNA samples. By the simulation, Gain was 17 dB and Noise Figure was 1.4 dB. We used multilayer process of LTCC (Low Temperature Co-fired Ceramics) substrate and conductor, resistor pattern for the MCM-C LNA fabrication. We made 2 buried inductors, 2 buried capacitors and 3 buried resistors. The number of the total layers was 6. On the top layer, we patterned microstrip line and pads for the SMT device. We measured the high frequency characteristics, and the results were 14.7 dB Gain and 1.5 dB Noise Figure.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.

• Journal of Korean Academy of Nursing
• /
• v.37 no.6
• /
• pp.883-890
• /
• 2007

Purpose: The purpose of this study was to identify the entity of critical care nursing practices through analyzing nursing statements described by electronic nursing records in a MICU. Methods: 176,459 nursing statements of 188 patients during a 6 month-stay were analyzed statement by statement according to the nursing process(nursing phenomena, nursing diagnosis, & nursing activity) and 21 nursing components of Saba's Clinical Care Classification. Results: Among 176,459 single statements, the statements of nursing activity ranked first in number. The contents of the statements were analyzed and categorized by main themes. Among 489 categorized themes, the number of themes of nursing phenomena statements was the highest. When analyzed by Saba's clinical Care Classification, the nursing statements mainly included a physiological component. Among 21 components, the respiratory component ranked in the first position in nursing phenomena, nursing diagnosis and nursing activity. The extra statements not included in the 21 components were 9,294(15.1%) in nursing phenomena and 21,949(22.7%) in nursing activity. Most are statements related to tests and the doctor. Conclusion: The entity of MICU nursing practice expressed by electronic nursing records was mainly focused on physiological components and more precisely on respiratory components.