• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2003

This study was conducted to investigate that the immature and mature oocytes of porcine can be cryopreserved by vitrification. Oocytes were centrifuged to polarize the cytoplasmic lipid droplets. The lipids were removed from cytoplasm by micromanipulation. Delipated oocytes were centrifuged after being preincubated with cytochalasin B(CB) fer 10 min, and lipid droplets were removed. Centrifuged oocytes were treated with CB and centrifuged to polorize lipid droplets but not delipated and control oocytes is not-treatment. Oocytes of three types were vitrified in electron microscope(EM) grids. The results of survival, maturation and cleavage rates were as follows. 1 The survival rates of immature oocytes were 15.1%, 0% and 0% in the Delipated, Centrifuged and Control after vitrification, respectively, and its rate of Delipated wassignificantly higher than Centrifuged and Control(P<.01). 2. The survival rates of mature oocytes were 12.21%, 0% and 0% in the Delipated, Centrifuged and Control after vitrification, respectively, and its rate of Delipated was significantly higher than Centrifuged and Control(P<.01). 3 The maturation rates of immature oocytes were 37.5% and 68.9% for metaphase II in the Delipated after vitrification and Non-vitrification, respectively, and its rate of Non-vitrification was significantly higher than Delipated after vitrification(P<.01). 4. The cleavage rates of immature oocytes were 12.5%, 0%, 0% and 56.1% in the Delipated, Centrifuged, Control after vitrification and Non-vitrification, respectively. It's rate of Delipated was higher than Centrifuged and Control, but there were no significant difference, and its rate of Non-vitrification was significantly higher than Delipated, Centrifuged and Control(P<.05). 5 The cleavage rates of mature oocytes were 25.0%, 0%, 0% and 67.9% in the Delipated, Centrifuged, Control after vitrification and Non-vitrification, respectively. It's rate of Delipated was higher than Centrifuged and Control, but there were no significant difference, and its rate of Non-vitrification was significantly higher than Delipated, Centrifuged and Control(P<.05).

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.24-29
• /
• 1999

Naturally-occurring iron minerals, goethite, magnetite, and hydrogen peroxide were used to catalyze and initiate Fenton-like oxidation of silica sand contaminated with mixture of diesel and kerosene in batch system. Optimal reaction conditions were investigated by varying pH(3, 7), $H_2O_2$ concentration(0%, 1%, 7%, 15%, 35%), initial contaminant concentration(0.2, 0.5, 1.0 g-mixture of diesel and kerosene/ kg-soil), and iron mineral contents(1, 5, and 10 wt % magnetite or goethite). Contaminant degradations in silica sand-iron mineral-$H_2O_2$ systems were identified by determining total petroleum hydrocarbon(TPH) concentration. The optimal pH of the system was 3. The system which iron minerals were the only iron source was more efficient than the system with $FeSO_4$ solution due to lower $H_2O_2$ consumption. In case of initial contaminant concentration of 1g-contaminant/kg-soil with 5 wt % magnetite, addition of 0%, 1%, 7%, 15%, and 35% of $H_2O_2$ showed 0%, 24.5%, 44%, 52%, and 70% of TPH reduction in 8 days, respectively. When the mineral contents were varied 0, 1, 5, and 10wt%, removal of contaminants were 0%, 33.5%, 50%, and 60% for magnetite and 0%, 29%, 41%, and 53% for goethite, respectively. Reaction of magnetite system showed higher degradation than that of goethite system due to dissolution of iron and mixed presence of iron(II) and iron(III); however, dissolved iron precipitated on the surface of iron mineral and seemed to cause reducing electron transfer activity on the surface and quenching $H_2O_2$. The system using goethite has better treatment efficiency due to less $H_2O_2$ consumption. When cach system was mixed by shaker, removal of contaminants increased by 41% for magnetite and 30% for goethite. Results of this study showed catalyzed $H_2O_2$ system made in-situ treatment of soil contaminated with petroleum possible without addition of iron source since natural soils generally contain iron minerals such as magnetite and goethite.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.382-386
• /
• 2011

Microbial fuel cells (MFC), devices that use bacteria as a catalyst to generate electricity, can utilize a variety of organic wastes as electron donors. The current generated may differ depending on the organic matter concentrations used, when other conditions, such as oxidant supply, proton transfer, internal resistance and so on, are not limiting factors. In these studies, a single-cathode type MFC (SCMFC) and dual-cathode type MFC (DCMFC) were used to ascertain the current's improvement through an increase in the contact area between the anode and the cathode compartments, because the cathode reaction is one of the most serious limiting factors in an MFC. Also an MFC was conducted to explore whether an improvement in electricity generation resulted from oxidizing the carbon sources and nitrates. About 250 mg $L^{-1}$ sodium acetate was fed to an anode compartment with a flow rate of 0.326 mL $min^{-1}$ by continuous mode. The current generated from the DCMFC was higher than the value produced from MFC with a single cathode. COD removal of dual-cathode MFC was also higher than that of single-cathode MFC. The nitrate didn't affect current generation at 2 mM, but when 4 and 8 mM nitrate was supplied, the current in the single-cathode and dual-cathode MFC was decreased by 98% from $5.97{\pm}0.13$ to $0.23{\pm}0.03$ mA and $8.40{\pm}0.23$ to $0.20{\pm}0.01$ mA, respectively. These results demonstrate that increasing of contact area of the anode and cathode can raise current generation by an improvement in the cathode reaction.

• Clinical and Experimental Pediatrics
• /
• v.52 no.2
• /
• pp.213-219
• /
• 2009

Purpose:Iron is a critical nutritional element that is essential for a variety of important biological processes, including cell growth and differentiation, electron transfer reactions, and oxygen transport, activation, and detoxification. Iron is also required for neoplastic cell growth due to its catalytic effects on the formation of hydroxyl radicals, suppression of host defense cell activities, and promotion of cancer cell multiplication. Chronic transfusion-dependent patients receiving chemotherapy may have iron overload, which requires iron-chelating therapy. We performed this study to demonstrate whether the iron chelating agent deferoxamine induces apoptosis in Saos-2 osteosarcoma cells, and to investigate the underlying apoptotic mechanism. Methods:To analyze the apoptotic effects of an iron chelator, cultured Saos-2 cells were treated with deferoxamine. We analyzed cell survival by trypan blue and crystal violet analysis, apoptosis by nuclear condensation, DNA fragmentation, and cell cycle analysis, and the expression of apoptotic related proteins by Western immunoblot analysis. Results:Deferoxamine inhibited the growth of Saos-2 cell in a time- and dose-dependent manner. The major mechanism for growth inhibition with the deferoxamine treatment was by the induction of apoptosis, which was supported by nuclear staining, DNA fragmentation analysis, and flow cytometric analysis. Furthermore, bcl-2 expression decreased, while bax, caspase-3, caspase-9, and PARP expression increased in Saos-2 cells treated with deferoxamine. Conclusion:These results demonstrated that the iron chelating agent deferoxamine induced growth inhibition and mitochondrial-dependent apoptosis in osteosarcoma Saos-2 cells, suggesting that iron chelating agents used in controlling neoplastic cell fate can be potentially developed as an adjuvant agent enhancing the anti-tumor effect for the treatment of osteosarcoma.

• Korean Journal of Food Science and Technology
• /
• v.40 no.2
• /
• pp.123-128
• /
• 2008

The MRLs (maximum residue limits) of DDT (DDD and DDE) in fresh ginseng, dried ginseng, and steamed red ginseng are set as low as 0.01 mg/kg, 0.05 mg/kg, and 0.05 mg/kg, respectively. Therefore, this study was undertaken to develop a simple and highly sensitive analysis method, as well as to reduce interfering ginseng matrix peaks, for the determination of DDT isomers (o,p'-DDE, p,p'-DDE, o,p'-DDD, p,p'-DDD, o,p'-DDT, and p,p'-DDT) in fresh ginseng, dried ginseng, and steamed red ginseng at the 0.01 mg/kg level. The method used acetonitrile extraction according to simultaneous analysis, followed by normal-phase Florisil solid-phase extraction column clean-up. The purification method entailed the following steps: (1) dissolve the concentrated sample extract in 7 mL hexane; (2) add 3 mL of $H_2SO_4$; (3) vigorously shake on avortex mixer; (4) cetrifuge at 2000 rpm for 5 min; (5) transfer 3.5 mL of the supernatant to the Florisil-SPE (500 mg/6 mL);and (6) elute the SPE column with 1.5 mL of hexane and 10 mL of ether/hexane (6:94). The determination of DDT isomers was carried out by a gas chromatography-electron capture detector (GC-${\mu}$ECD). The hexane and ether/hexane (6:94) eluate significantly removed chromatographic interferences, and the addition of 30% $H_2SO_4$ to the acetonitrile extract effectively reduced many interfering ginseng matrix peaks, to allow for the determination of the DDT isomers at the 0.01 mg/kg level. The recoveries of the 6 fortified (most at 0.01 mg/kg) DDT isomers from fresh ginseng, dried ginseng, and steamed red ginseng ranged from 87.9 to 99.6%. The MDLs (method detection limits) ranged from 0.003 to 0.009 mg/kg. Finally, the application of this method for the determination of DDT isomers is sensitive, rapid, simple, and inexpensive.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.149-162
• /
• 2000

Coenzyme Q10 is found in all tissues including skin and it is the well-known coenzyme for mitochondrial enzymes. The electron and proton transfer functions of the quinone ring are of fundamental importance for the oxidative phosphorylation pathway to generate energy in the cells. Coenzyme Q10 has been studied as a potent antioxidant molecule in the skin. It is involved in the skin's response to UVR irradiation. The concentration of this antioxidant in UVR exposed skin is higher than in non-exposed skin. However, recent studies have also shown that coenzyme Q10 is one of the first antioxidants to be depleted when skin is UVR-irradiated. This indicates that coenzyme Q10 is primarily involved in defense mechanisms of the skin. Therefore, we questioned whether coenzyme Q10 shows reulatory effect of melanogenesis. Here we report that coenzyme Q10 inhibits melanin neosynthesis of normal human melanocytes grown in culture, and lightens UVB-induced hyperpigmentation of the guinea pig skin in vivo. We treated human melanocytes with 0.05mM to 0.5mM of coenzyme Q10 for a total of two days. This inhibited melanin neosynthesis of cultured human melanocytes dose-dependently. The inhibitory effect of coenzyme Q10 was as effective as kojic acid or vitamin C on cultured human melanocytes. CoQ10 didn't have direct inhibitory effect on tyrosinase activity in in vitro tyrosine hydroxylase activity To further clarify the effect of coenzyme Q10 on the melanogenesis, we established UVB-induced hyperpigmentation on the shaved backs of brownish guinea pigs. The UVB intensity was 500mJ/$\textrm{cm}^2$ and the total energy dose was 1,500 mJ/$\textrm{cm}^2$. The animals were exposed to UVB radiation one times a week for three consecutive weeks. Coenzyme Q10, kojic acid, Arbutin, vitamin C(1% in vehicle) or vehicle alone as a control were then topically applied daily to the hyperpigmented areas twelve times per week far four successive weeks. The lightening effect was evaluated by visual scoring, chromameter and immunohistochemistry. Coenzyme Q10 had lightening effect on the UVB-induced hyperpigmentation without any other side effects, whereas another compounds showed weak lightening efficacies. Therefore, these results suggest that coenzyme Q10 may be useful for solving physiological hyperpigmenting problems for cosmetic purposes.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.479-487
• /
• 2018

The purpose of this study is to analyze photochemical activity of nursery seedlings under drought stress, using chlorophyll fluorescence reaction analysis. Young nursery seedlings of tomato (Lycopersicon esculentum Mill.) and cucumber (Cucumis sativa L.), were grown under drought stress for 8 days. Analysis of chlorophyll fluorescence reaction (OJIP) and parameters, were performed to evaluate photochemical fluctuation in nursery seedlings under drought stress. Chlorophyll fluorescence reaction analysis showed maximal recorded fluorescence (P) decreased from the 5 day after treatment in tomato seedlings, while an amount of chlorophyll fluorescence increased at the J-I step. Thus, physiological activity was reduced. In cucumber seedlings, maximal recorded fluorescence (P) and maximal variable fluorescence ($F_V$) lowered from the 4 day after treatment, and chlorophyll fluorescence intensity of J-I step increased. Chlorophyll fluorescence parameter analysis showed electron transfer efficiency of PSII and PSI were significantly inhibited with decreasing $ET2_O/RC$ and $RE1_O/RC$ from the 5 day after treatment, in tomato seedlings and from the 4 day after treatment, in cucumber seedlings. $ET2_O/RC$ and $PI_{ABS}$ significantly changed. In conclusion, 6 indices such as $F_V/F_M$, $DI_O/RC$, $ET2_O/RC$, $RE1_O/RC$, $PI_{ABS}$ and $PI_{TOTAL}ABS$ were selected for determining drought stress in nursery seedlings. Drought stress factor index (DFI) was used to evaluate whether the crop was healthy or not, under drought stress. Cucumber seedlings were less resistant to drought stress than tomato seedlings, in the process of drought stress.

• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2024

Mn-M/Al₂O₃ (M = Cu, Fe, Co, and Ce) catalysts were prepared for simultaneous oxidation of NO, CO, and CH₄, and their oxidation activities were compared. The Mn-Cu/ Al₂O₃ catalyst with the best simultaneous oxidation activity was characterized by XRD, Raman, XPS, and O₂-TPD analysis. The result of XRD indicated that Mn and Cu existed as complex oxides in the Mn-Cu/Al₂O₃ catalyst. Raman and XPS results showed that electron transfer between Mn ions and Cu ions occurred during the formation of the Mn-O-Cu bond in the Mn-Cu/Al₂O₃ catalyst. The XPS O 1s and O₂-TPD analyses showed that the Mn-Cu/Al₂O₃ catalyst has more adsorbed oxygen species with high mobility than the Mn/Al₂O₃ catalyst. The high simultaneous oxidation activity of the Mn-Cu/Al₂O₃ catalyst is attributed to these results. Gas-phase NO promotes the oxidation reactions of CO and CH₄ in the Mn-Cu/Al₂O₃ catalyst while suppressing the NO oxidation reaction. These results were presumed to be because the oxidized NO was used as an oxidizing agent for CO and CH₄. On the other hand, the oxidation reactions of CO and CH₄ competed on the Mn-Cu/Al₂O₃ catalyst, but the effect was not noticeable because the catalyst activation temperature was different.