• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.77-77
• /
• 2017

Titanium and its alloys offer attractive properties in a variety of applications. These are widely used for the field of biomedical implants because of its good biocompatibility and high corrosion resistance. Titanium anodizing is often used in the metal finishing of products, especially those can be used in the medical devices with dense oxide surface. Based on SAE/AMS (Society of Automotive Engineers/Aerospace Material Specification) 2488D, it has the specification for industrial titanium anodizing that have three different types of titanium anodization as following: Type I is used as a coating for elevated temperature forming; Type II is used as an anti-galling coating without additional lubrication or as a pre-treatment for improving adherence of film lubricants; Type III is used as a treatment to produce a spectrum of surface colours on titanium. In this study, we have focused on Type II anodization for the medical (dental and orthopedic) application, the anodized surface was modified with gray color under alkaline electrolyte. The surface characteristics were analyzed with Focused Ion Beam (FIB), Scanning Electron Microscopy (SEM), surface roughness, Vickers hardness, three point bending test, biocompatibility, and corrosion (potentiodynamic) test. The Ti-6Al-4V alloy was used for specimen, the anodizing procedure was conducted in alkaline solution (NaOH based, pH>13). Applied voltage was range between 20 V to 40 V until the ampere to be zero. As results, the surface characteristics of anodic oxide layer were analyzed with SEM, the dissecting layer was fabricated with FIB method prior to analyze surface. The surface roughness was measured by arithmetic mean deviation of the roughness profile (Ra). The Vickers hardness was obtained with Vickers hardness tester, indentation was repeated for 5 times on each sample, and the three point bending property was verified by yield load values. In order to determine the corrosion resistance for the corrosion rate, the potentiodynamic test was performed for each specimen. The biological safety assessment was analyzed by cytotoxic and pyrogen test. Through FIB feature of anodic surfaces, the thickness of oxide layer was 1.1 um. The surface roughness, Vickers hardness, bending yield, and corrosion resistance of the anodized specimen were shown higher value than those of non-treated specimen. Also we could verify that there was no significant issues from cytotoxicity and pyrogen test.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.747-753
• /
• 2006

Tea was known to have different taste and flavor with leaching temperature and time. This study was designed to optimize leaching condition for green tea bag that has been popular to consumers. Soluble solid, total phenolics, and total flavonoid content increased as leaching temperature and time increased. The ranges of maximum leaching condition for these components were $96.1{\sim}99.0^{\circ}C\;and\;5.7{\sim}6.8\;min$. As leaching temperature decreased and leaching time increased, however, electron donating ability (EDA) increased and showed the highest values at $65.3^{\circ}C$ and 7.2 min. The overall acceptability was maximal at $70.2^{\circ}C$ and 3.1min. Based upon the physicochemical and organoleptic properties, it was predicted that the optimal range of leaching conditions for green tea bag was $73{\sim}83^{\circ}C\;for\;5.3{\sim}6.3\;min$.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.95-101
• /
• 2014

Silver objects tarnish with black from reaction with sulfurous acid or hydrogen sulfide of atmospheric. Blackening of silver objects results from formation of silver sulfide($Ag_2O$) on the surface. Silver sulfide usually is usually removed by conservation treatment. There are several cleaning methods such as chemical, electrochemical and micro-abrasion cleaning, but all of them consume silver. This study investigated the safe and effective parameter of laser cleaning by test on silver coupons. Laser cleaning is a selective process for the removal of specific substances. At first, laser cleaning applied to plain silver coupons, which were not corroded, to find out the safe range of laser energy density. From results, plain silver coupons were not changed at 1064nm below $4.00J/cm^2$ and at 532nm below $2.39J/cm^2$. The corrosion layer(silver sulfide) of artifical corroded silver coupons was removed at 1064nm with $2.39J/cm^2$ by 5~10 pulses and at 532nm with $1.19J/cm^2$ by 5~10 pulses. The removal thickness of corrosion layer was about 13-25nm per a laser pulse using AES analysis. In addition, laser cleaning tested the tarnish silver rings based on the results of silver coupons. As a result of test, the black surface were clean successfully and gave luster of silver, which showed the application possibility of laser cleaning for silver objects.

• Parasites, Hosts and Diseases
• /
• v.50 no.3
• /
• pp.207-213
• /
• 2012

The egg morphology of minute intestinal flukes (MIF) that can occur as human infections in the Republic of Korea, i.e., Metagonimus yokogawai, M. miyatai, M. takahashii, Heterophyes nocens, Heterophyopsis continua, Stellantchasmus falcatus, Stictodora fuscata, Pygidiopsis summa, and Gymnophalloides seoi, was studied in comparison with Clonorchis sinensis. The adult worms were obtained from residents of endemic areas, and their intrauterine eggs were studied and measured using light microscopy; the length, width, length-width ratio (LWR), and Faust-Meleney index (FMI). Several specimens were processed for scanning electron microscopy (SEM), and before gold-coating, the uterine portion of each fluke was etched with a sharp pin in order to expose the eggs. The MIF eggs were ovoid, pyriform, or elliptical with a size range of $21-35{\times}12-21{\mu}m$. S. fuscata eggs revealed the highest FMI (largest in the area) and lowest LWR, whereas P. summa eggs showed the lowest FMI and medium LWR. SEM revealed that G. seoi and S. fuscata had remarkably clean shell surface lacking the muskmelon-like structure which is prominent in C. sinensis eggs. In Metagonimus spp., H. continua, H. nocens, and S. falcatus eggs, minute surface ridges were recognizable though less prominent compared with C. sinensis. On the surface of P. summa eggs, thread-like curly structures were characteristically seen. The results revealed that important differential keys for MIF eggs include the length, width, area (FMI), shape of the eggs, and the extent of the muskmelon-like structure or ridges on their shell surface and operculum.

• Research in Plant Disease
• /
• v.8 no.2
• /
• pp.92-100
• /
• 2002

For the survey of viruses infected in peanut cultivated in Korea, peanut seeds and leaves showing viral symptoms were collected from their growing areas. Typical symptoms on virus infected peanut leaves including mosaic, mottle with necrosis, yellowing, stripe or vein banding and stunts were observed. Two viruses isolated from the naturally infected peanuts were identified as Bean common mosaic virus(BCMV-PSt) and Peanut mottle virus(PeMoV) by their host range, immunosorbent elcetron microscopy(ISEM), direct immuno staining assay(DISA), RT-PCR, and intracellural symptoms. Direct negative staining method by electron microscope showed filamentous particles of about 780 m in length as well as inclusion bodies. In ultrathin sections of BCMV-PSt and PeMoV infected tissues, cytoplasmic cylindrical inclusions as well as filamentous virus particles were observed in the cytoplasm of parenchyma cells. ISEM revealed filamentous particles strongly decorated with antiserums of BCMV-PSt and PeMoV Peanut seeds were stained with BCMV-PSt and PeMoV antisera indicating the possibility of seed transmission far these viruses. Seedlings germinated from peanut seeds which reacted with antiserums of BCMV-PSt by DISA showed mild mottle or stripe symptoms while mosaic and necrotic mottle symptoms were observed for PeMoV-positive seedlings. Filamentous particles were strongly decorated with each antiserum under ISEM observation. BCMV-PSt coat protein gene of about 1.2 Kbp was amplified by RT-PCR. Altogether these results indicate that BCMV-PSt is the most prevalent virus infecting peanut in Korea.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.102-108
• /
• 2008

We have studied the properties of Ag/undoped ZnO (ZnO) multilayer thin films deposited on glass substrate by the facing targets sputtering method. In an attempt to find out the optimum conditions of the Ag thin film, which would be coated on the ZnO thin film, we investigated the changes of sheet resistance, transmittance and surface morphology as a function of deposition times and the substrate temperature. The electrical and optical characteristics of Ag/ZnO multilayers were evaluated by a four-point probe, a UV/VIS spectrometer with a spectral range of 390-770 nm, a X-ray Diffractometer (XRD), an atomic force microscope (AFM) and a Field Emission Scanning Electron Microscope (SEM), respectively. We were able to prepare the Ag/ZnO multilayer thin film with sheet resistance of 9.25 $\Omega/sq.$ and transmittance of over 80% at 550nm.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.606-611
• /
• 1999

To identify irradiated foods, studies have been carried out with electron spin resonance (ESR) spectroscopy on bone containing foods, such as chicken, pork, and beef. Bones cleaned, pieced and dried were irradiated with doses of 0, 1, 3, 5 kGys using a $Co^{60}$ irradiator. The bones were placed in a resonant quartz tube with an internal diameter of about 4.0 mm within the Bruker Win-ESR spectrometer, and the intensity of the ESR signal could be quantified by double integration of the first derivative spectrum. The irradiated bone presented an asymmetric absorption in shape, different from that of an unirradiated one. It could be possible to detect at doses lower than 1 kGy below the dose employed commercially (3 kGy) in the case of irradiated chicken bone. The signal intensity was greatest in the beef bone, intermediate in the pork bone and lowest in the chicken bone; it was normally lower for smaller animals than for larger species, and small variations were observed between samples of the same species. The intensity of the signal induced in bones increased linearly with irradiation doses in the range of 1.0 kGy to 5.0 kGy, and it was possible to distinguish between samples given low and high doses of irradiation. The signal stability for 6 weeks made them ideal for the quick and easy identification of irradiated meats.

• Journal of Applied Biological Chemistry
• /
• v.63 no.2
• /
• pp.153-159
• /
• 2020

The analytical method was established for simultaneous determination of fungicide prochloraz and its metabolites in several animal commodities using gas chromatography (GC) coupled with electron capture detector (ECD). Samples including beef meat, pork meat, chicken meat, milk, and egg were hydrolyzed with pyridine hydrochloride which converts prochloraz and its metabolites to 2,4,6-trichlorophenol (2,4,6-TCP) because residue definition for prochloraz was 'sum of prochloraz and its metabolites containing the 2,4,6-trichlorophenol moiety, expressed as prochloraz', for compliance with MRLs from animal commodities. Therefore, residual prochloraz was extracted with acetone, decomposed to 2,4,6-TCP, partitioned with dichloromethane, purified with aminopropyl SPE and quantified as 2,4,6-TCP with GC-ECD. The instrumental limit of quantitation and method LOQ (MLOQ) was 0.01 ㎍/mL and 0.02 mg/kg for prochloraz and 0.005 ㎍/mL and 0.01 mg/kg for 2,4,6-TCP, respectively. The linearity of the calibration curve was good with R² >0.995 in the range of 0.005-0.2 ㎍/mL. Fortification levels of prochloraz were 0.02 mg/kg (MLOQ) and 0.2 mg/kg (10MLOQ) for recovery tests. Overall recoveries of prochloraz were >90% with <10% of coefficient variation (C.V.). This established analytical method was fully validated and could be useful for quantification of prochloraz and its metabolites in animal commodities as official analytical method.

• Journal of Wetlands Research
• /
• v.16 no.4
• /
• pp.353-362
• /
• 2014

The purpose of this study is to investigate the effect of micro-topography to vegetation pattern in Dunchon-dong wetland. To characterize the effect of micro-topography, changes in water level and vegetation pattern were monitored from 2007 to 2008. Depending on the relative elevation, the study site was divided into 4 sectors. The relative areas of sectors in ascending order were 11%, 10%, 18% and 24%, respectively. During investigation period, average water pH was 6.10 (${\pm}0.13$), electron conductivity was $51.5({\pm}6.0){\mu}s/cm$, $PO_4$-P, $NO_3$-N and $NH_4$-N concentration were $0.04({\pm}0.02)mg/L$, $0.14({\pm}0.07)mg/L$, and lower than 0.01mg/L, respectively. Water level was very changeable in low-water season because the area of lowest sector was small. This characteristic increased the effect of difference of accumulated precipitation from March to April in 2007 and 2008 to plant community composition in lower sectors. Different plant guilds dominated respective sectors and annual plants were major dominant species in the study site. This study suggested that the elevation gradients are necessary to create the habitats for various plant guilds in wetland.

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.1
• /
• pp.22-31
• /
• 1992

The Sancheong kaolin was fractionated into 9 size fractions by wet sieving, sedimentation, and centrifugation. The systematic X-ray diffraction combined with electron microscopy shows that the clay mineral composition of each size fraction is related to the original fabric of kaolin. Minerals such as halloysite (10${\AA}$), kaolinite, illite, and goethite which were formed by procipitation from solution are generally concentrated in the finer fractions, whereas verniculite which was formed by pseudomorphic transformation from other primary minerals are concentrated in the coarser factions. Kaolinits of various types which were formed by precipitation or transformation show a wide size range but they are generally concentrated in the coarser fractions. Halloysite or halloysite-kaolinite clusters in coarse fractions are the fragmentation products of the walls of original boxwork clusters in coarse fractions are the fragmentation products of the walls of original boxwork kaolin which escaped the complete dispersion even through the grinding, ultrasonic agitation, and chemical treatment. Separation of fully hydrated halloysite and kaolinite was possible by systematic wet size fractionation. The coarse-grained minerals such as vermiculite and kaolinite are usually removed during the preparation of clay fraction smaller than 2${\mu}m$, whereas the fine-grained minerals such as illite and goethite are overlooked in X-ray diffraction of the bulk samples because of their minor contents. The systematic wet size fractionation is needed for understanding of the exact mineralogy of kaolin of weathering origin.