• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.762-765
• /
• 2014

We fabricated a periodically poled lithium niobate (PPLN) by direct laser-writing of a quasi-phase-matching (QPM) structure in photolithographic process. Because we do not need to prepare a photomask by electron-beam writing, the "maskless" process shortens the fabrication time and significantly reduces the cost. We evaluated the poling quality of the direct laser-written PPLN by measuring the diffraction noise from the surface relief pattern of the fabricated QPM grating and comparing the results to those from a conventional PPLN made with a photomask. The quality of the PPLN fabricated by direct laser-writing was shown to be equivalent to that fabricated by the conventional method.

• 연구논문집
• /
• s.25
• /
• pp.105-113
• /
• 1995

Fresnel lenses are developed for flat optics with the optical characteristics close to aspherical lens such as sharp focusing and dispersion instead of spherical or aspherical surface. Usually, these fresnel lenses and diffraction gratings are machined by high-energy beam such as electron beam machining, but recently with the development of ultra precision machine tool and machining technology, 3-dimension micro machining becomes preferable. This study on the micro machining of fresnel lens is carried out to develop the basic technology of ultra precision micro machining. The machined lens mold will be used for the manufacturing of fresnel lens with 120mm focal distance using synthetic resin material with 1.49 refractive index(PMMA), and the shape of lens is 48mm diameter, $300\mum$ pitch and about $5-700\mum$depth of groove in brass.

• Korean Journal of Optics and Photonics
• /
• v.7 no.2
• /
• pp.112-119
• /
• 1996

TM polarized photon tunneling time and the position where TM photons appear after two-dimensional tunneling in a frustrated total internal reflection (FTIR) structure are calculated. This is done by converting the FTIR tunneling problem of TM photons to an electron tunneling problem with a position-dependent effective mass for a heterostructure potential barrier. Derived results are compared with TE photon cases.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.152-157
• /
• 2000

Post-deposition vacuum annealing effects in electron-bearn-evaporated indium tin oxide (ITO) films have been investigated by the change of transmittance, sheet resistance and crystalline structure with annealing temperature ( $200-335^{\circ}C$) and oxygen partial pressure ($1\times^10^{-5}-1$\times10^{-4} torr$) in air and vacuum. The sarnples were polycrystalline films with a preferred orientation in the (222) plan. High quality films with sheet resistance as low as 62 Q/O and transmittance over 99% (absentee layer at 500 nm) have been obtained by suitably controlling the vacuum annealing pararneters.neters.

• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.378-382
• /
• 2018

In most previous investigations of plasmonic and metamaterial applications, the metallic film has been regarded as a perfect electrical conductor. Here we demonstrate the resonance characteristics of THz metamaterials fabricated from metal film that has a finite dielectric constant, using finite-difference time-domain simulations. We found strong redshift and spectral broadening of the resonance as we decrease the metal's plasma frequency in the Drude free-electron model. The frequency shift can be attributed to the effective thinning of the metal film, originating from the increase in penetration depth as the plasma frequency decreases. On the contrary, only peak broadening occurs with an increase in the scattering rate. The metal-thickness dependence confirms that the redshift and spectral broadening occur when the effective metal thickness drops below the skin-depth limit. The electromagnetic field distribution illustrates the reduced field enhancement and reduced funneling effects near the gap area in the case of low plasma frequency, which is associated with reduced charge density in the metal film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.2
• /
• pp.71-75
• /
• 2014

To observe the optical characteristic of oxide semiconductor depending on the degree of bonding structures, SiOC, ZnO and IGZO were prepared by the RF magnetron sputter system and chemical vapor deposition. Generally, crystal ZnO, amorphous SiOC and IGZO changed the optical characteristics in according to the electro-chemical behavior due to the oxygen vacancy at an interface between different groups. Transmittance of SiOC and IGZO with amorphous structures was higher than that of ZnO with crystal structure, because of lowering the carrier concentration due to the recombination of electron and holes carriers as oxygen vacancies. Besides, the energy gap of amorphous SiOC and IGZO was higher than the energy gap of crystal ZnO. The diffusion mobility of holes is higher than the drift mobility of electrons.

• BMB Reports
• /
• v.46 no.4
• /
• pp.195-200
• /
• 2013

To understand the corneal regeneration induced by bevacizumab, we investigated the structure changes of stroma and basement membrane regeneration. A Stick soaked in 0.5 N NaOH onto the mouse cornea and 2.5 mg/ml of bevacizumab was delivered into an alkali-burned cornea (2 ${\mu}l$) by subconjunctival injections at 1 hour and 4 days after injury. At 7 days after injury, basement membrane regeneration was observed by transmission electron microscope. Uneven and thin epithelial basement membrane, light density of hemidesmosomes, and edematous collagen fibril bundles are shown in the alkali-burned cornea. Injured epithelial basement membrane and hemidesmosomes and edematous collagen fibril bundles resulting from alkali-burned mouse cornea was repaired by bevacizumab treatment. This study demonstrates that bevacizumab can play an important role in wound healing in the cornea by accelerating the reestablishment of basement membrane integrity that leads to barriers for scar formation.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.162-167
• /
• 2005

An optical directional coupler, which consists of quantum wells with nanothickness, is designed by using Modal Transmission Line Theory (MTLT). To demonstrate the validity and usefulness, the propagation characteristics and the coupling efficiencies are rigorously evaluated at nanoscale couplers, which consist of double quantum wells with different effective masses. The numerical result reveals that the coupling efficiency of nanoscale couplers is maximized at a coupling length 2052.3 nm, if the total electron energy is 83.9 meV. Furthermore, the coupler operates as a filter with narrower band as the barrier thickness increases.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.306-310
• /
• 1999

Electron intersubband absorption in Sb $\delta$-doped Si(110)/SiGe multiple quantum well structures is observed. Normally incident light can excite electrons in Si(110) quantum wells, which is not possible for Si(001) or GaAs quantum wells. The influence of Ge composition in SiGe barries is investigated. As the Ge composition in SiGe barriers increases, the absorption strength is decreased and the transition energy is increased. It is verifired by comparing the calculated and experimental results obtained at various incident and polarization angles that normally incident light and parallel incident light are absorbed in different processes.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.25-28
• /
• 1994

Weakly electron withdrawing bromine substituted poly(2-bromo-1,4-phenylenevinylene) (PBrPV) was synthesized th-rough water-soluble precursor method. The linear and nonlinear optical properties of PBrPV were compared with those of poly(1,4-phenylenevinylene) (PPV). The third-order nonlinear optical susceptibility, X^{(3)}$, was measured by using third-harmonic generation (THG) technique at 1907 nm, fundamental wavelength. The calculated $X^{(3)}$ values of PPV and PBrPV were 3${\times}$ 10$^{-12}$ esu and 2${\times}$10$^{-12}$ esu, respectively.