• 제목/요약/키워드: Electron irradiation

검색결과 1,014건 처리시간 0.025초

Dosimetric Study Using Patient-Specific Three-Dimensional-Printed Head Phantom with Polymer Gel in Radiation Therapy

  • Choi, Yona;Chun, Kook Jin;Kim, Eun San;Jang, Young Jae;Park, Ji-Ae;Kim, Kum Bae;Kim, Geun Hee;Choi, Sang Hyoun
    • 한국의학물리학회지:의학물리
    • /
    • 제32권4호
    • /
    • pp.99-106
    • /
    • 2021
  • Purpose: In this study, we aimed to manufacture a patient-specific gel phantom combining three-dimensional (3D) printing and polymer gel and evaluate the radiation dose and dose profile using gel dosimetry. Methods: The patient-specific head phantom was manufactured based on the patient's computed tomography (CT) scan data to create an anatomically replicated phantom; this was then produced using a ColorJet 3D printer. A 3D polymer gel dosimeter called RTgel-100 is contained inside the 3D printing head phantom, and irradiation was performed using a 6 MV LINAC (Varian Clinac) X-ray beam, a linear accelerator for treatment. The irradiated phantom was scanned using magnetic resonance imaging (Siemens) with a magnetic field of 3 Tesla (3T) of the Korea Institute of Nuclear Medicine, and then compared the irradiated head phantom with the dose calculated by the patient's treatment planning system (TPS). Results: The comparison between the Hounsfield unit (HU) values of the CT image of the patient and those of the phantom revealed that they were almost similar. The electron density value of the patient's bone and brain was 996±167 HU and 58±15 HU, respectively, and that of the head phantom bone and brain material was 986±25 HU and 45±17 HU, respectively. The comparison of the data of TPS and 3D gel revealed that the difference in gamma index was 2%/2 mm and the passing rate was within 95%. Conclusions: 3D printing allows us to manufacture variable density phantoms for patient-specific dosimetric quality assurance (DQA), develop a customized body phantom of the patient in the future, and perform a patient-specific dosimetry with film, ion chamber, gel, and so on.

Manufacturing and testing of flat-type divertor mockup with advanced materials

  • Nanyu Mou;Xiyang Zhang;Qianqian Lin;Xianke Yang;Le Han;Lei Cao;Damao Yao
    • Nuclear Engineering and Technology
    • /
    • 제55권6호
    • /
    • pp.2139-2146
    • /
    • 2023
  • During reactor operation, the divertor must withstand unprecedented simultaneous high heat fluxes and high-energy neutron irradiation. The extremely severe service environment of the divertor imposes a huge challenge to the bonding quality of divertor joints, i.e., the joints must withstand thermal, mechanical and neutron loads, as well as cyclic mode of operation. In this paper, potassium-doped tungsten (KW) is selected as the plasma facing material (PFM), oxygen-free copper (OFC) as the interlayer, oxide dispersion strengthened copper (ODS-Cu) alloy as the heat sink material, and reduced activation ferritic/martensitic (RAFM) steel as the structural material. In this study, a vacuum brazing technology is proposed and optimized to bond Cu and ODS-Cu alloy with the silver-free brazing material CuSnTi. The most appropriate brazing parameters are a brazing temperature of 940 ℃ and a holding time of 15 min. High-quality bonding interfaces have been successfully obtained by vacuum brazing technology, and the average shear strength of the as-obtained KW/Cu and ODS-Cu alloy joints is ~268 MPa. And a fabrication route for manufacturing the flat-type divertor target based on brazing technology is set. For evaluating the reliability of the fabrication technologies under the reactor relevant condition, the high heat flux test at 20 MW/m2 for the as-manufactured flat-type KW/Cu/ODS-Cu/RAFM mockup is carried out by using the Electron-beam Material testing Scenario (EMS-60) with water cooling. This paper reports the improved vacuum brazing technology to connect Cu to ODS-Cu alloy and summarizes the production route, high heat flux (HHF) test, the pre and post non-destructive examination, and the surface results of the flat-type KW/Cu/ODS-Cu/RAFM mockup after the HHF test. The test results demonstrate that the mockup manufactured according to the fabrication route still have structural and interfacial integrity under cyclic high heat loads.

사용 후 핵연료 용해 중 휘발 및 잔류 요오드 분석 (Determination of volatile and residual iodine during the dissolution of spent nuclear fuel)

  • 김정석;박순달;전영신;하영경;송규석
    • 분석과학
    • /
    • 제22권5호
    • /
    • pp.395-406
    • /
    • 2009
  • 사용 후 핵연료시료 중의 요오드를 정량하고 용해과정 중 요오드의 휘발거동을 조사하기 위하여 중성자 방사화 분석(NAA) 및 전자미세탐침분석(EPMA)을 이용하였다. 모의 사용 후 핵연료시료(SIMFUELs)를 준비하여 $HNO_3$(1+1) 용액으로 $90^{\circ}C$에서 8시간 용해하고 용해 후 용해용액 중에 잔류된 요오드, 용해장치에 응축된 요오드 및 휘발하여 흡착체에 포집된 요오드 각각을 정량하였다. 응축된 요오드는 장치내 용해용액을 옮긴 후 $HNO_3$(1+1) 용액으로 재증류하여 회수하였다. 용해 및 재증류 용액중의 요오드는 용매추출과 이온교환 및 침전법으로 분리한 후 방사화학적 중성자 방사화 분석(RNAA)으로 정량하였다. 요오드 분리에 사용한 이온교환분리관 및 여과키트는 폴리에틸렌 관으로 제작하여 중성자 조사를 위한 이송관 내부의 삽입체(Insert)로 이용하였다. 핵연료용해 중 휘발된 요오드는 제조한 흡착체(Ag-Silica gel)를 담은 흡착관에 포집하였다. 흡착체를 구간별로 나누어 균질시료로 만든 다음 비파괴 중성자 방사화 분석(INAA)으로 정량하였다. 흡착된 요오드의 분포를 EPMA 분석으로 조사하였다. 모의 사용 후 핵연료 및 원자력발전소로부터의 실제 사용 후 핵연료 시료로부터 휘발된 요오드의 흡착특성을 비교하였다.

광 반응성기를 갖는 아크릴 점착제의 합성과 반도체 다이싱 테이프로의 적용 연구 (Synthesis of Pressure-sensitive Acrylic Adhesives with Photoreactive Groups and Their Application to Semiconductor Dicing Tapes)

  • 박희웅;장남규;권기옥;신승한
    • 공업화학
    • /
    • 제34권5호
    • /
    • pp.522-528
    • /
    • 2023
  • 반도체 제조공정인 다이싱 공정용 점착 테이프를 제조하기 위해 다양한 개수의 광 반응기를 갖는 화합물을 합성하였고 아크릴 공중합체에 도입하여 UV 경화형 아크릴 점착제를 제조하였다. 합성된 광반응성 화합물(f = 2 또는 3)의 구조는 NMR을 이용하여 확인하였다. 광반응성 화합물(f = 1~3)은 우레탄 반응을 통해 아크릴 점착제의 곁가지로 도입되었고, FT-IR 측정을 통해 UV 경화형 아크릴 점착제가 성공적으로 합성되었음을 확인하였다. UV 조사 전 후의 박리강도 변화는 실리콘 웨이퍼를 기재로 하여 평가되었으며, UV 조사 전 점착제의 높은 박리강도(~2000 gf/25 mm)가 UV조사 후 크게 감소(~5 gf/25 mm)하였다. 다 관능성 광 반응기가 도입된 점착제의 점착력 감소 효과가 가장 컸으며 FE-SEM을 통한 표면 잔류물 측정 결과, UV 조사 후의 표면 잔류물도 매우 낮은 수준(~0.2%)으로 관찰되었다.

유방 보존술 후 내유림프절을 포함하는 방사선치료 기법에 관한 연구 (A Study of the Radiotherapy Techniques for the Breast Including Internal Mammary Lymph Nodes)

  • 정경근;심수정;유세환;김용배;금기창;김종대;서창옥
    • Radiation Oncology Journal
    • /
    • 제27권1호
    • /
    • pp.35-41
    • /
    • 2009
  • 목적: 유방암 환자에서 부분적 유방절제술 후 내유림프절(internal mammary lymph node: IMN)을 포함하여 방사선 치료하기 위한 최적의 치료 방법을 찾고자 하였다. 대상 및 방법: 초기 유방암으로 부분적 유방절제수술을 받고 방사선치료를 받은 10명의 환자들의 CT simulation 데이터를 얻어서 각 환자들에서 4가지 치료방법을 계획하고 평가하였다. 5명은 오른쪽 유방을, 나머지 5명은 왼쪽 유방을 치료 받았다. 각 환자에서 유방, 쇄골 상부 림프절(supraclavicular lymph node: SCL), IMN (위쪽 3개의 늑골 사이에 있는 림프절만 포함)을 조사하는 치료계획을 하였다. IMN을 조사하는 방법으로 4가지 방식, 즉 표준적인 접선방향 치료(Standard Tangential Field: STF), 확장접선치료 방법(Wide Tangential Field, WTF), 부분 확장접선치료 방법(Partially Wide Tangential Field: PWT), 광자와 전자를 혼합한 방법(Photon-Electron Mixed 5 Field: PEM)을 사용하였다. SCL field는 3 cm에, 유방조직은 중심점에 50.4 Gy를 28회에 나누어 치료하도록 처방하였다. 결과: 각각의 치료 기법은 환자마다 차이는 있었으나 뚜렷한 특징을 보였다. 유방조직의 선량은 각 치료 기법마다 큰 차이가 없었다. IMN는 치료 기법마다 차이가 있으나 STF를 제외한 세 가지 방법은 대체로 IMN을 잘 감싸고 있었다. 왼쪽 유방을 치료하는 경우 심장이 받는 선량은 고선량 영역에서는 WTF, PWT, PEM, STF의 순으로 많은 체적에 선량을 받았으며 낮은 선량 영역에서는 PEM, WTF, PWT, STF의 순이었다. 동측 폐의 선량 역시 마찬가지의 순서를 보였다. Lyman-Kutcher-Burman model에 의한 방사선 폐렴에 대한 NTCP는 개인별 편차가 컸다. 대체로 STF가 가장 작고 PWT가 다음이었으나 PEM와 WTF의 경우는 환자마다 큰 차이를 보였다. 결론: 환자들의 다양한 체형에도 불구하고 IMN를 포함하여 치료하는 경우 PWT가 폐와 심장의 조사선량을 줄이고 IMN에 표적선량을 전달하는데 적합한 것으로 생각된다.

Magnetic Core-shell ZnFe2O4@ZnO@SiO2 Nanoparticle의 합성과 성질에 관한 연구 (Synthesis and Characterization of Magnetic Core-shell ZnFe2O4@ZnO@SiO2 Nanoparticles)

  • 유정열;이영기;김종규
    • 대한화학회지
    • /
    • 제59권5호
    • /
    • pp.397-406
    • /
    • 2015
  • II-VI 족 무기 화합물 반도체인 ZnO는 폭 넓은 응용분야 때문에 많은 관심을 받고 있다. ZnO는 넓은 밴드갭(3.37 eV)과 큰 excitation binding energy(60 meV)를 가지고 있고 광학특성, 반도체, 압전특성, 자성, 항균성, 광촉매 등 여러 분야에 응용 가능한 물질로 알려져 있다. 특히 광촉매 분야에 적용할 때 재수득의 문제를 위해 자성을 갖는 물질과 core-shell 구조를 이루는 연구가 활발히 진행 되고 있다. 본 연구에서, magnetic core-shell ZnFe2O4@ZnO@SiO2 nanoparticles(NPs)는 3단계 과정을 통해 성공적으로 합성하였다. 합성된 물질들의 구조적 특성을 확인하기 위해 X-ray diffraction(XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy(FT-IR)을 사용하였다. ZnFe2O4 spinel 구조와 ZnO wurtzite 구조는 XRD를 사용하여 확인되었고, 전구체의 농도별 분석을 통해 ZnO 생성 비율을 확인 하였다. 합성된 물질들은SEM을 통하여 표면의 변화를 확인하였다. SiO2층의 형성과 ZnFe2O4@ZnO@SiO2 NPs의 합성은 FT-IR을 통해 Fe-O, Zn-O 및 Si-O-Si 결합을 확인하였다. 합성된 물질들의 자기적 성질은 Vibrating sample magnetometer(VSM)을 사용 하여 분석하였다. ZnO층과 SiO2 층의 형성의 결과는 자성의 증가와 감소로 확인하였다. 합성된 ZnFe2O4@ZnO@SiO2 NPs의 광촉매 효과는 오염물질 대신 methylene blue(MB)를 사용하여 UV 조사 하에 암실에서 실험하였다.

물리적 방법(PSL, TL)을 이용한 선종별 조사처리 식품의 검지 특성 (Detection of irradiated food using photostimulated luminescence and thermoluminescence)

  • 정유경;이지연;강태선;조천호;이재황;최장덕;권기성
    • 한국식품과학회지
    • /
    • 제48권5호
    • /
    • pp.399-404
    • /
    • 2016
  • 국내 조사처리 허용품목을 대상으로 다소비, 다빈도, 다수입 품목 12종(감자, 양파, 마늘, 건호박, 목이버섯, 검은콩, 청국장가루, 미역, 고춧가루, 라면수프, 옥수수차, 분말 녹차)을 선정하여 조사처리 선원에 따른 물리적 확인시험법(PSL 및 TL)을 적용하여 조사처리 여부를 확인하였다. PSL 적용 결과 모든 비조사 시료에서는 700 count/60초($T_1$) 이하의 값을 나타내어 음성 또는 비조사판정이 가능하였다. 감마선, 전자선과 X선을 처리한 시료에서는 879-2,414 (intermediate)와 19,951-65,919,035 (positive) 범위로 수치가 확인되었으며 조사 선원에 따른 수치차이는 보이지 않았다. TL 적용 결과 비조사 시료에서는 $300^{\circ}C$ 이상에서 자연방사선에 의한 peak를 나타내는 비특이적인 글로우 곡선을 보였으며 3개의 선종별 TL 분석 결과에서는 $150-250^{\circ}C$의 온도 범위에서 최대 peak를 나타내었다. 한편, 선종별 TL 강도 차이는 청국장 분말의 경우 감마선(${\gamma}$)>전자선(E)>X선(X), 고춧가루와 분말 녹차는 ${\gamma}$>X>E, 미역, 목이버섯, 마늘은 E>${\gamma}$>X, 양파, 감자, 검은콩는 E>X>${\gamma}$, 라면수프와 옥수수차는 X>E>${\gamma}$, 건호박은 X>${\gamma}$>E의 순서로 TL 강도 차이를 나타내었다. 이와 함께, TL ratio($TL_1/TL_2$) 값은 조사처리구에서 0.1143-2.9318 범위를 나타내어 국내 단일시료 조사판정 범위인 TL ratio 0.1 이상을 확인할 수 있었다. 따라서 조사처리선원에 따른 조사여부 판정은 현행 물리적 확인시험법으로 가능하였으며 광물질의 함량과 조사처리 선량 등 식품 중 조사처리에 관한 연구가 지속적으로 수행되어야 할 것으로 생각된다.

광자극발광법, 열발광법 및 전자스핀공명법을 이용한 국내 방사선 조사 허용 외 식품에 대한 검지법 적용 연구 (Studies on the Applications of PSL, TL and ESR Methods for The Detection of Irradiated Foods not Allowed to be Irradiated in Korea)

  • 김규헌;최은진;장호원;신춘식;김문영;황초롱;김은정;조태용;박건상;강명희;김재이;김진숙;박순희;성락선;장영미;윤혜성;한상배
    • 한국식품위생안전성학회지
    • /
    • 제27권3호
    • /
    • pp.233-246
    • /
    • 2012
  • 본 연구는 2008년부터 2010년까지 국내 수입물량이 많은 품목 중 국외에서는 허용되었지만, 국내 허용되지 않은 식품군에서 일부 견과류, 과실류, 기호식품, 유지종자류, 건어물류, 채소류, 향신식품 등 15 품목을 선정하여 PSL, TL 및 ESR을 이용하여 실태조사와 검지법별 적용 가능성을 확인하였다. PSL 측정 결과는 건새우, 볶음땅콩, 조미땅콩에서는 적용 가능성이 높은 것으로 판단되었으나 나머지 품목에서는 적용 가능성이 낮다고 판단하였다. TL 시험법의 경우 대부분의 조사시료는 $150{\sim}250^{\circ}C$ 사이에서 비조사 시료는 $300^{\circ}C$ 이상에서 강한 glow curve peak가 나타남으로써 비조사구와 조사구간의 확인이 가능하였으나 조미땅콩, 건자두, 건체리, 망고(냉동)에서 시료에 미네랄이 없거나 양이 적어 적용 가능성 낮았다. 또한, 동일 식품군이라도 가공 과정이나 미네랄 함량 등 개별 시료의 차이에 의하여 TL glow curve의 intensity가 낮게 나타나 TL 시험법 적용이 가능한 경우도 있고 불가능한 경우도 있는 것으로 확인되었다. ESR 분석 결과는 건포도, 건체리, 망고(건, 냉동), 람부탄(냉동) 및 코코아(파우더/16.1%, 20%, 30%, 40%)에서 결정형 당 유래의 라디칼에 의한 다성분 ESR signal이 관찰되었다. 건자두, 계피가루, 파슬리, 당근 및 브로콜리에서 셀룰로오스 유래의 라디칼에 의한 특이 ESR signal이 관찰되었다. 건한치, 황태채 및 건새우에서 하이드록시아파타이트 유래 라디칼에 의한 특이 ESR signal이 관찰되었다. 하지만, 대부분의 시료에서 조사 전후 모두 single line의 비특이적인 signal이 관찰되어 대조군이 없는 경우에는 방사선 조사 여부 확인시험법으로서 적용가능성이 낮다고 판단되었다. 방사선 조사 허용 외 식품을 대상으로 방사선 조사여부를 분석한 결과, 대상식품 모두에서 방사선이 조사되지 않은 것으로 확인되었으며, 대부분의 품목에서 TL과 ESR 검지법이 PSL 검지법 보다 적용 가능성이 높은 것으로 확인되었다. 본 연구를 통해 TL은 미네랄 함량이 적은 시료를 제외한 대부분 시료에서 검지법별 적용 확대가 가능하였으나 ESR은 식품유형과 함량에 따라 결과에 차이가 있어 검지법별 적용 가능성 연구가 지속적으로 필요할 것으로 생각하였다.

영상 기반 치료 장비용 팬톰을 이용한 토모테라피 피부 선량 검증 (Verification of Skin Dose in Tomotherapy Using the Developed Phantom for Image Based Radiation Treatment System)

  • 박지연;장지나;오승종;강대규;정원균;이정우;장홍석;김회남;박혜진;김성환;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제20권2호
    • /
    • pp.88-96
    • /
    • 2009
  • 최근 토모테라피의 빗면 조사 빔(tangential beam)을 이용하여 전자 빔과 광자 빔의 인접 조사 없이도 치료에 필요한 선량을 균일하게 전달할 수 있다는 결과가 보고되면서, 토모테라피를 이용한 피부암 치료가 증가하고 있다. 그러나 토모테라피 치료 빔은 선형가속기 빔과는 다른 물리적인 특성을 갖고 있으며, 여러 가지 동적 요소들이 결합되어 빔을 조사하므로 기존에 사용하고 있는 팬톰 이외의 독립적인 도구를 사용하여 피부 선량을 검증할 필요가 있다. 피부 선량 검증을 위하여 영상 기반 치료용 팬톰에 선량 측정 기능을 추가한 새로운 팬톰을 개발하였으며, 열형광선량계(LiF, TLD-100)와 GafChromic EBT필름을 팬톰에 삽입하여 전달된 피부 선량을 측정하였다. 팬톰의 반지름 방향으로 피부 영역을 포함하여 깊이 35 mm 영역까지 균일한 선량을 전달했을 때, 필름으로 측정한 특정 점에서의 선량은 계산 선량에 대하여 평균 약 2% 정도 낮게 나타났으며 처방 선량보다 최대 ${\pm}14%$까지 더 높거나 낮은 선량이 전달된 영역이 나타나는 것을 확인 할 수 있었다. 치료 계획 시스템의 계산 결과와 비교하였을 때, 조사 영역에서 측정한 선량 분포의 균일성이 감소하였으며 팬톰 내에 삽입한 테플론에 의한 선량 변화는 거의 나타나지 않았다. 토모테라피의 치료 빔을 이용하여 피부암과 같이 굴곡이 있는 낮은 깊이에 위치한 표적에 선량을 전달하는 경우, 연속적으로 회전하며 조사되는 빗면 조사 빔의 특성과 치료 계획 시스템의 선량 계산 방식에 따라서 피부 선량의 오차가 허용 범위보다 더 크게 나타날 수 있으므로 치료전 측정을 통한 피부 선량 검증이 필요하다.

  • PDF

L-글루타민산 생산균 Brevibacterium lactofermentum의 Bacteriophag에 관한 연구 (Studies on the Bacteriophages of Brevibacterium lactofermentum)

  • 이태우
    • 미생물학회지
    • /
    • 제17권3호
    • /
    • pp.97-130
    • /
    • 1979
  • Many industrial processes those employ bacteria are subjected to phage infestations. In L-glutamic acid fermentions using acetic acid, the phage infestations of the organisms have been recently recognized. In efforts to elucidate the sources of phage contamination involved in the abnormal fermentation, a series of study was conducted to isolate the phages both from the contents of abnormally fermented tanks and the soil or sewage samples from the surroundings of a fermentation factory, to define major charateristics of the phage isolates, and finally to determine the correlation between the phage isolates and temperate phages originating from the miscellaneous bacterial species isolated from the soil or sewage samples. The results are summarized as follows; 1) All phages were isolated from the irregular fermentation tanks and soil or sewage samples, and they were designated as phage PR-1, PR-2, PR-3, PR-4, PR-5, PR-6, and PR-7, in the order of isolation. These PR-series phages were proved to be highly specific for the variant strains of Br. lactofermentum only, namely, phage PR-1 and PR-2 for Br. lactofermentum No. 468-5 and phage PR-3~PR-7 for Br. lactofemrentum No. 2256. By cross-neutralization test, the 7 phagescould be subdivided into 3 groups, i. e., phage PR-I and PR-2 the first, phage PR-3, PR-4, PR-5, PR-6 the second, and the phage PR-7 the third. 2) The 7 phages were virulent under the experimental conditions. They produced plaques with clear and relatively sharp margins without distinct halo. The mean sizes of plaques were 1.5mm in diameter for phage PR-1 and PR-2, and 1. Omm for phages PR-3~PR-7. Double layer technique modified by Hongo and described by Adams, was applied to assay of the PR-series phages. The factors influencing the plaques were as follows;young age cells of host bacteria cultured for 3-6 hours represented the largest number and size, optimum was pH 7.0, incubation temperature was $30^{\circ}C$, and agar concentration and amount of overlayer medium were 0.6% and 0.2ml, respectively. 3) PR-series phages were stable in 0.05M tris buffer and 0.1M ammonium acetate buffer solution. The addition of $5{\times}10^{-3}M$ magnesium ion effectively increased the stability. Thermostability experiments indicated that PR-series phages were stable at the teinperture between $50^{\circ}{\sim}55^{\circ}C$ in nutrient medium, $45^{\circ}{\sim}50^{\circ}C$ in buffer solution. However, the phages mere completely inactivated at 603C and 65$^{\circ}$C within 10 minutes. The phages were stable at the range of pH6~9 in nutrient medium and of pH 8-9 in buffer solution, respectively. Exposure of the phages to UV for 25, 60 and 100 seconds resulted in the complete loss of infectivily, respectively. 4) Electron microscopy showed that PR-series phage particles exhibited rather similar morphology, differing in the size All of PR-series phages had a multilateral head and had a simple long tiil about three to five times long as compared with head. By the size, phage PR-1 and PR-2, PR-3, PR-4, PR-5, and PR-6 and PR-7 were classified into same groups, respectively. The head and tail size of phage PR-1, PR-5, PR-5(T) and PR-7 were 85nm, 74nm and 235nm and 350mm, and 72nm and 210nm, respectively. 5) Nucleic acids of PR-series phages were double stranded DNA. The G+C contents of phage PR-1, PR-5 and PR-7 were 56.1, 52.9 and 53.7, respectively. The values of G+C contents derived from the $T_m$ were in agreement with the chemically determined values. 6) PR-series phages effectively adsorbed on their host bacteria at the rate of more than 90% during 5 min. K value for phage PR-1, PR-5 and PR-7 were calculated to be $6{\times}10^9 ml$ per minute, respectiveky. The pH of the medium did effect adsorption rate, but both temperature and age of host cells did not. Generally, optimum adsorption condition of phages seemed to be almost same as optimum growth conditions of host bacteria. 7) In one-step growth experiments, the latent periods at $30^{\circ}C$ for PR-1, and PR-7 were about 70, 50 and 55 min, respectively. The corresponding average burst size was 200, 70 and 90, respectively. Lpsis period according to the multiplicity of infection and a phage series. In case of m. o. i. 100, strain No. 2256 (PR-5) and No. 468-5(PR-1) failed to grow and turbidity decreased after 50 and 70min, respectively. 8) In the lysate of a plaque purified phage PR-5 infected bacteria, there observed 2 types ofphage particles, i. e., phage PR-5 and PR-5 (T) of similar morphology but differing at the length of phage tail, and phage tail like particles. The phage taillike particles could be divided into 4 types by the length. Induction experiments of Br. lactofermentum with UV irradiation, mitomycin C or bacitracin treatment produced neither phage PR-5 (T) or phage tail-like particles. 9) No lysis occured when the growth of 7 strains of miscellaneous bacteria, isolated from soil and sewage samples, were inoculated with either phage PR-5 (T) or phage tail-like particles the inoculation of phage PR-5 pellet resulted in the growth inhibition of the orgainsms in the spot test. The lysates obtained from 3 miscellaneous soil derived bacteria following mitomycin C treatment the growth of Br. lactofermentum, but did not lyze the bacterium.

  • PDF