• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.13-14
• /
• 2004

Using Se as a photoconductive element and ZnS as a luminescent element, a Se/ZnS thin film device for light amplifier applications was fabricated and its characteristics were investigated At various conditions of substrate temperatures, heat treatment times, and heat treatment temperatures, Se thin films and ZnS thin films were separately deposited by an EBE(Electron Beam Evaporation) method of an high accuracy in deposition rates and the optimum fabrication conditions for the Se thin film and the ZnS thin film with a hexagonal structure were obtained The Se/ZnS thin film light amplifier was fabricated by evaporating the ZnS thin film on an ITO(Indium Tin Oxide) glass and the Se thin film on the ZnS thin film in sequence.

• 한국추진공학회지
• /
• 제10권1호
• /
• pp.44-53
• /
• 2006

전산화 단층촬영법을 이용하여 탄소/탄소 목삽입재의 밀도 분포를 평가하였다. 전산화 단층촬영법의 Team hardening, 전기적 잡음 및 산란 X-ray의 영상을 보정하고 신호 대 잡음비를 높여 최적화할 때 측정된 탄소/탄소 복합재료의 밀도는 98.74%의 신뢰도 수준에서 ${\pm}0.01g/cm^3$ 분포를 갖는 것으로 평가되었다. 전산화 단층촬영 결과의 검증은 탄소/탄소 목삽입재를 절단하여 수침법에 의한 밀도 측정과 주사전자현미경 관찰을 통하여 수행되었으며 단층촬영 결과는 수침법에 의한 밀도 분포와 주사전자현미경의 영상과 일치하였다.

• 대한전자공학회논문지SD
• /
• 제37권8호
• /
• pp.48-56
• /
• 2000

회절격자의 인접한 반주기 길이 사이에 음의 상관관계가 있는 회절격자 반주기의 랜덤 변이가 QWS-DFB 레이저의 특성에 미치는 영향을 유효 굴절률 전달 매트릭스 방법을 이용하여 해석하였다. 상관계수가 0에서 -1로 가까이 감에 따라 랜덤 변이에 의한 회절격자 주기의 오차가 감소하면서 단일모드 안정성과 파장 정확도의 저하가 덜 심각해진다. 이는 랜덤 변이의 크기가 같다면 상관관계가 없는 전자빔 lithography 법으로 회절격자를 만들기보다는 optical lithography 법으로 만드는 것이 회절격자 주기 랜덤 변이의 영향을 줄이는 데에 유리함을 의미한다. 그리고 전자빔 lithography를 이용하여 DFB 레이저를 만들 때에 랜덤 변이의 영향을 줄이려면 분해능을 높이거나, 인접 반주기 길이의 랜덤 변이에 음의 상관관계를 주어야 한다.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.367-372
• /
• 2002

The vertically well-aligned carbon nanotubes(CNTs) were successfully grown on Ni coated silicon wafer substrate by DC bias-assisted PECVD(Plasma Enhanced Chemical Vapor Deposition). As a catalyst, Ni thin film of thickness ranging from 15~30nm was prepared by electron beam evaporator method. In order to find the optimum growth condition, the type of gas mixture such as $C_2H_2-NH_3$ was systematically investigated by adjusting the gas mixing ratio at $570^{\circ}C$ under 0.4Torr. The diameter of the grown CNTs was 40~200nm and the diameter of the CNTs increased with increasing the Ni particles size. TEM images clearly showed carbon nanotubes to be multiwalled. The measured turn-on field was $3.9V/\mu\textrm{m}$ and an emission current of $1.4{\times}10^4A/\textrm{cm}^2$ was $7V/\mu\textrm{m}$. The CNTs grown by bias-assisted PECVD was able to demonstrate high quality in terms of vertical alignment, crystallization of graphite and the processing technique at low temperature of $570^{\circ}C$ and this can be applied for the emitter tip of FEDs.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.27-30
• /
• 2012

This paper proposes a micro gas sensor for measuring $H_2S$ gas. This is based on a $SnO_2$-CuO multi-layer thin film. The sensor has a silicon diaphragm, micro heater, and sensing layers. The micro heater is embedded in the sensing layer in order to increase the temperature to an operating temperature. The $SnO_2$-CuO multi layer film is prepared by the alternating deposition method and thermal oxidation which uses an electron beam evaporator and a thermal furnace. To determine the effect of the number of layers, five sets of films are prepared, each with different number of layers. The sensitivities are measured by applying $H_2S$ gas. It has a concentration of 1 ppm at an operating temperature of $270^{\circ}C$. At the same total thickness, the sensitivity of the sensor with multi sensing layers was improved, compared to the sensor with one sensing layer. The sensitivity of the sensor with five layers to 1 ppm of $H_2S$ gas is approximately 68%. This is approximately 12% more than that of a sensor with one-layer.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.62-66
• /
• 2010

Cellulosic materials were dissolved by NMMO(N-methylmorpholine-N-oxide) and CED (Cupriethylene diamine), respectively, to measure their DPs (degrees of polymerization) by using viscometer. We changed cellulose DPs by applying various amounts of low intensity electron-beam radiation to the cellulosic materials. NMMO is environmental-friendly, non-toxic, and biodegradable organic cellulose solvent and used industrially because of its high cellulose dissolving power and high solvent recovery ratio. The cellulose DP measurement results using these two different chemicals were correlated highly ($R^2$ >0.95). It was also found that cellulose with high DP was dissolved more easily in NMMO than CED. In addition, NMMO method gave more higher resolution in the measurement.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.776-783
• /
• 2019

Laser welding is usually a more effective method than electron-beam one since a vacuum chamber is not required. It is important for joining Zr-1%Nb (E110) alloy in a manufacturing process of nuclear fuel rods. In the present work, effect of energy parameters of pulsed laser welding on properties of butt joints of sheets with a thickness of 0.5 mm is investigated. The most efficient combination has been found (8-11 J pulse energy, 10-14 ms pulse duration, 780-810 W peak pulse power, 3 Hz pulse frequency, 1.12 mm/s welding speed). The results show that ultimate strength under static loading can not be used as a quality criterion for zirconium alloys welds. Increased shielding gas flow rate does not allow to protect weld metal totally and contributes to defect formation without using special nozzles. Several types of imperfections of the welds have been found, but the major problem is branching microcracks on the surface of the welds. It is difficult to identify the cause of their appearance without additional research on improving the welding zone protection (gas composition and flow rate as well as nozzle configuration) and studying the hydrogen content in the welds.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.

• 보존과학회지
• /
• 제27권1호
• /
• pp.41-47
• /
• 2011

은 소지 위에 금을 도금한 은제금도금유물을 대상으로 성분분석을 위해 X선 형광 분석기를 이용하여 비파괴분석을 실시하면 소지금속인 Ag에서 전자궤도에 따라 무게백분율(wt.%)의 값이 큰 차이가 나타나는 특이점을 확인할 수 있다. 이러한 특이점을 이용하여 육안으로는 파악하기 쉽지 않은 유물에서도 은제금도금기법이 사용되었는지를 판단할 수 있는 근거를 제시하고자 재현시료를 제작하여 비교분석을 실시하였다. 그 결과 수은아말감도금법과 전기도금법으로 제작된 시료에서는 실제 유물들의 분석결과와 같은 결과를 볼 수 있었다. 하지만 금은합금시료의 경우 도금시료와는 달리 주성분들의 전자궤도에 따른 차이가 미미한 것을 확인할 수 있었다. 도금시료에서 나타나는 이러한 원인으로는 단일재료가 아닌 도금으로 인한 이중구조에 의해 도금층에서 XRF 빔을 흡수하면서 발생하는 것으로 보인다. 따라서 비파괴분석에서 나타나는 이러한 결과를 이용한다면 단면을 관찰하지 않아도 은제금도금 기법의 사용 여부를 판단할 수 있을 것으로 확인하였다.

• 한국재료학회지
• /
• 제10권4호
• /
• pp.290-294
• /
• 2000

ZnS:Mn TFEL device를 전자선 진공증착법으로 제작하여 전기광학적 특성에 관하여 조사하였다. $Ta_2O_5$ 박막의 산소 결핍에 따른 정전용량을 측정하기 위하여 산소분위기에서 열처리에 따른 AES(Auger electron spectroscopy)와 C-F를 측정하였다. 제작한 EL 소자의 전기장 발광 파장은 550~650nm 였으며 이것은 $Mn^{2+}$ 이온의 $3d^5$ 여기준위인 $^4T_1(^4G)$ 에서 $3d^5$ 기저준위인 $^6A_1(^S)$로의 내각전자전이 피크이다. 열처리를 수행하지 않은 $Ta_2O^5$를 절연층으로 사용한 EL 소자의 발광시작전압은 24~28V이고 색도 좌표값 X=0.5151, Y=0.4202인 황등색 발광을 하였다. $Ta_2O_5$를 절연층으로 사용한 소자가 저전압에서 구동이 가능하므로 EL 소자의 실용화가 기대된다.