• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.758-768
• /
• 2012

This paper presents the modeling and position-sensorless vector control of a dual-airgap axial flux permanent magnet (AFPM) machine optimized for use in flywheel energy storage system (FESS) applications. The proposed AFPM machine has two sets of three-phase stator windings but requires only a single power converter to control both the electromagnetic torque and the axial levitation force. The proper controllability of the latter is crucial as it can be utilized to minimize the vertical bearing stress to improve the efficiency of the FESS. The method for controlling both the speed and axial displacement of the machine is discussed. An inherent speed sensorless observer is also proposed for speed estimation. The proposed observer eliminates the rotary encoder, which in turn reduces the overall weight and cost of the system while improving its reliability. The effectiveness of the proposed control scheme has been verified by simulations and experiments on a prototype machine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.225-227
• /
• 2009

The conventional fixed gain PI controller is very sensitive to step change of command speed, parameter variation and load disturbances. The precise speed control of interior permanent magnet synchronous motor(IPMSM) drive becomes a complex issue due to nonlinear coupling among its winding currents and the rotor speed as well as the nonlinear electromagnetic developed torque. Therefore, there exists a need to tune the PI controller parameters on-line to ensure optimum drive performance over a wide range of operating conditions. This paper is proposed artificial intelligent-PI(AIPI) controller of IPMSM drive using adaptive learning mechanism(ALM) and fuzzy neural network(FNN). The proposed controller is developed to ensure accurate speed control of IPMSM drive under system disturbances and estimation of speed using artificial neural network(ANN) controller. The PI controller parameters are optimized by ALM-FNN at all possible operating condition in a closed loop vector control scheme. The validity of the proposed controller is verified by results at different dynamic operating conditions.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.420-423
• /
• 2009

The conventional fixed gain PI controller is very sensitive to step change of command speed, parameter variation and load disturbances. The precise speed control of interior permanent magnet synchronous motor(IPMSM) drive becomes a complex issue due to nonlinear coupling among its winding currents and the rotor speed as well as the nonlinear electromagnetic developed torque. Therefore, there exists a need to tune the PI controller parameters on-line to ensure optimum drive performance over a wide range of operating conditions. This paper is proposed hybrid intelligent-PI(HIPI) controller of IPMSM drive using adaptive learning mechanism(ALM) and fuzzy neural network(FNN). The proposed controller is developed to ensure accurate speed control of IPMSM drive under system disturbances and estimation of speed using artificial neural network(ANN) controller. The PI controller parameters are optimized by ALM-FNN at all possible operating condition in a closed loop vector control scheme. The validity of the proposed controller is verified by results at different dynamic operating conditions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.36-42
• /
• 2008

The superconducting motor shows several advantages such as smaller size and higher efficiency against conventional motor especially utilized in ship propulsion application. However, this size reduction merit appears in large capacity more than several MW. We are going to develop a 5MW class synchronous motor with rotating High-Temperature Superconducting (HTS) coil. that is aimed to be utilized for ship propulsion so it has very low-speed, The ship propulsion motor must generate very high electromagnetic torque instead of low-speed. Therefore. the rotor (field) coils need very large magnetic flux that results in large amount of expensive HTS conductor for the field coil. In this paper a 5MW HTS motor for ship propulsion is considered to be designed with construction cost reduced via HTS field coil cost reduction because HTS conductor cost is critical factor in the construction cost of HTS motor. In order to reduce the HTS conductor amount. iron-cored rotor types are considered. so several cases with iron-core are compared one another and with an air-core case.

• 전자공학회논문지
• /
• 제52권7호
• /
• pp.135-142
• /
• 2015

인체 구동 방식의 자가 발전기는 외부 환경에 덜 의존한다는 장점 덕분에 비상용 혹은 야외 활동 중의 소규모 전력 공급원으로 주목 받고 있다. 하지만 대부분의 자가 발전기는 전자기 유도 결합의 효율이 높지 않아 출력이 미미하며, 특정 부위의 근육만을 지속적으로 사용하는 단조로운 구동 방식을 택하고 있어, 사용 중에 쉽게 지루해질 뿐만 아니라 근피로가 쉽게 누적되어 실제 원하는 출력을 얻을 만큼 충분한 시간 동안 구동하는 것이 거의 불가능하다. 이러한 낮은 효율과 사용성의 문제로 인해 인체 구동 방식의 자가발전기가 실생활에서 사용되는 빈도는 높지 않다. 본 연구에서는 전자기 유도 효율이 높은 종축 결합 방식의 발전 장치를 간단한 구조로 구현하여 출력을 높이는 동시에, 자성체의 운동 관성에 의한 가속이 가능한 인체 구동 방식의 발전기를 설계 제작하였다. 개발된 발전기와 기존 상용 자가 발전기와의 비교 실험을 통해 높은 출력 뿐 아니라 장시간 구동이 가능함을 검증하였다. 아울러 인체 구동 발전기에서 실질적으로 중요한 요소임에도 불구하고 기존 연구에서 제시된 바 없는 인체의 투입 에너지를 실증적으로 파악하기 위해 호흡 가스 기반의 실제 운동 대사량 측정법에 근거한 실험을 시행하여 자가 발전기의 운동 부하를 추정하였다. 향후 성능 개선과 휴대성 증진을 통해 모바일 기기의 전력 지속 문제를 해결하는 데 기여할 수 있을 것으로 기대한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.98-99
• /
• 2016

본 연구에서는 $360^{\circ}$의 조향 기능을 갖는 듀얼 구동식의 선박 접이안 시스템 개발에 대해 다룬다. 대형 선박의 경우, 부두에 접이안시 bow thruster, side thruster, pod propulsor 등이 사용되고 있으나 최근 해양레저선박이 대형화(슈퍼요트 등)됨에 따라 마리나 시설을 이용할 경우 접이안시 선박 대 선박, 선박 대 계류시설과의 사고가 증가 추세에 있다. 따라서, 이를 해결하기 위한 방안으로 듀얼 구동식 추진체를 이용하여 접이안이 가능한 시스템에 대해 연구를 수행하였다. 주요 내용은 조이스틱을 이용한 선수, 선미의 듀얼 구동과 마그네틱 기어를 이용한 동력 전달이다. 조이스틱에서 두 구동 모터 및 프로펠러로 이어지는 제어 응답성을 확인하고, 전자기 설계를 통한 마그네틱 기어 제작 및 시험으로 수중 추진기에 회전력을 전달 가능한 토크를 확보하였다. 또한, 실해상 시운전을 통하여 개발 시스템의 성능을 확인하였다.

• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.57-66
• /
• 2009

종래의 고정된 이득을 가진 PI 제어기는 지령속도, 부하변화 등과 같은 파라미터 변동에 대해서 매우 민감하다. IPMSM 드라이브의 정확한 속도제어는 비선형적인 전자기적 발생저항뿐만 아니라 회전자 속도와 권선저항사이의 비선형적 관계 때문에 복잡한 문제점이 있다. 따라서 광범위한 동작상태에서 최적 제어를 위해 PI 제어기의 이득값을 실시간으로 조절해야한다. 본 논문은 FNN과 ALM을 이용하여 IPMSM 드라이브의 HIPI 제어기를 제시한다. 제시된 제어기는 ANN을 이용하여 속도를 추정하고, 시스템 외란에 대해서 IPMSM 드라이브의 고성능 속도제어를 제시한다. PI 제어기의 이득값은 모든 동작상태에서 ALM-FNN에 의해 최적화 되어진다. 제시된 제어기는 다양한 동작상태에 대한 분석을 통해 타당성을 입증한다.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.273-283
• /
• 2015

In this study, we propose an analytical model for studying magnetic fields in radial-flux permanent-magnet eddy-current couplings by considering the effects of slots and iron-core protrusions on the eddy currents. We focus on the analytical prediction of the air-gap field by considering the influence of eddy currents induced in conducting bars. In the proposed model, the permanent magnet region is treated as the source of a time-varying magnetic field and the moving-conductor eddy current problem is solved based on the resolution of time-harmonic Helmholtz equations. The spatial harmonics in the air gap and in slots, as well as the time harmonics are all considered in the analytical calculation. Based on the proposed field model, the electromagnetic torque is computed by using the Maxwell stress tensor method. Nonlinear finite element analysis is performed to validate the analytical model. The proposed model can be used for permanent-magnet eddy-current couplings with any slot-pole combination.

• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.21-33
• /
• 2014

Background: Significant technological development and changes happened in the tractor industries. Contrariwise, the test procedures of the major standard development organizations (SDO's) remained unchanged or with a little modification over the years, demanding new tractor test standards or improvement of existing ones for tractor performance, safety, and comfort. Purpose: This study focuses on reviewing the research trends regarding performance, safety and comfort evaluation of agricultural tractors. Based on this review, few recommendations were proposed to revise or improve the current test standards. Review: Tractor power take-off power test using the DC electric dynamometer reduced human error in the testing process and increased the accuracy of the test results. GPS signals were used to determine acceleration and converted into torque. High capacity double extended octagonal ring dynamometer has been designed to measure drawbar forces. Numerical optimization methodology has been used to design three-point hitch. Numerous technologies, driving strategies, and transmission characteristics are being considered for reducing emissions of gaseous and particulate pollutants. Engine emission control technology standards need to be revised to meet the exhaust regulations for agricultural tractors. Finite Element Analysis (FEA) program has been used to design Roll-Over Protective Structures (ROPS). Program and methodology has been presented for testing tractor brake systems. Whole-body vibration emission levels have been found to be very dependent upon the nature of field operation performed, and the test track techniques required development/adaptation to improve their suitability during standardized assessment. Emphasizes should be given to improve visibility and thermal environment inside the cab for tractor operator. Tractors need to be evaluated under electromagnetic compatibility test conditions due to large growing of electronic devices. Research trends reviewed in this paper can be considered for possible revision or improvement of tractor performance, safety, and comfort test standards.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1090-1100
• /
• 2017

This paper presents the comparison of starting current characteristics of a three-phase induction motor fed by two types of soft starters. The first soft starter under investigation is a conventional AC voltage controller on the basis of a phase-control technique. The other is the proposed asynchronous PWM AC chopper which is developed from the conventional synchronous PWM AC chopper. In this paper, the proposed asynchronous PWM AC chopper control scheme is developed by generating only two asynchronous PWM signals for a three-phase main power circuit (6 switching devices) from a single voltage control signal which is compared with a single sawtooth carrier signal. By this approach, the PWM signals are independent and easy to implement since the PWM signals do not need to be synchronized with a three-phase voltage source. Details of both soft starters are discussed. The experimental and simulation results of the starting currents are shown. It is found that the asynchronous PWM AC chopper efficiently works as a suitable soft starter for the three-phase induction motor due to that the starting currents are reduced and are sinusoidal with less harmonic contents, when being compared with the starting current waveforms using the conventional phase-control starting technique. Also the proposed soft starter offers low starting electromagnetic torque pulsation.