Browse > Article
http://dx.doi.org/10.5307/JBE.2014.39.1.021

Research Trends for Performance, Safety, and Comfort Evaluation of Agricultural Tractors: A Review  

Kabir, Md. Shaha Nur (Department of Biosystems Machinery Engineering, Chungnam National University)
Ryu, Myong-Jin (Department of Biosystems Machinery Engineering, Chungnam National University)
Chung, Sun-Ok (Department of Biosystems Machinery Engineering, Chungnam National University)
Kim, Yong-Joo (Machinery Technology Group, Advanced R&D Center, LS Mtron Ltd.)
Choi, Chang-Hyun (Department of Bio-mechatronic Engineering, Sungkyunkwan University)
Hong, Soon-Jung (Rural Development Administration)
Sung, Je-Hoon (Department of Agricultural Engineering, National Academy of Agricultural Science, Rural Development Administration)
Publication Information
Journal of Biosystems Engineering / v.39, no.1, 2014 , pp. 21-33 More about this Journal
Abstract
Background: Significant technological development and changes happened in the tractor industries. Contrariwise, the test procedures of the major standard development organizations (SDO's) remained unchanged or with a little modification over the years, demanding new tractor test standards or improvement of existing ones for tractor performance, safety, and comfort. Purpose: This study focuses on reviewing the research trends regarding performance, safety and comfort evaluation of agricultural tractors. Based on this review, few recommendations were proposed to revise or improve the current test standards. Review: Tractor power take-off power test using the DC electric dynamometer reduced human error in the testing process and increased the accuracy of the test results. GPS signals were used to determine acceleration and converted into torque. High capacity double extended octagonal ring dynamometer has been designed to measure drawbar forces. Numerical optimization methodology has been used to design three-point hitch. Numerous technologies, driving strategies, and transmission characteristics are being considered for reducing emissions of gaseous and particulate pollutants. Engine emission control technology standards need to be revised to meet the exhaust regulations for agricultural tractors. Finite Element Analysis (FEA) program has been used to design Roll-Over Protective Structures (ROPS). Program and methodology has been presented for testing tractor brake systems. Whole-body vibration emission levels have been found to be very dependent upon the nature of field operation performed, and the test track techniques required development/adaptation to improve their suitability during standardized assessment. Emphasizes should be given to improve visibility and thermal environment inside the cab for tractor operator. Tractors need to be evaluated under electromagnetic compatibility test conditions due to large growing of electronic devices. Research trends reviewed in this paper can be considered for possible revision or improvement of tractor performance, safety, and comfort test standards.
Keywords
Agricultural tractor; Comfort; Performance; Safety;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 ASABE. 2009. SAE J2194. Roll-over protective structures (ROPS) for wheeled agricultural tractors. 2950 Niles Road, St. Joseph, MI 49085-9659.
2 ASABE. 2013. American Society of Agricultural and Biological Engineers. 2950 Niles Road, St. Joseph, MI 49085.
3 Barron, P. J., Owende, P. M. O., McDonnell, K. P and S. M. Ward. 2005. A method for assessment of degradation of task visibility from operator cabins of field machines. International Journal of Industrial Ergonomics 35(7): 665-673.   DOI
4 Crawford, M. L. 1974. Generation of standard EM fields using TEM transmission cells. IEEE Transactions on Electromagnetic Compatibility EMC-16(4):189-195.
5 Chen, Y., McLaughlin, N. B and S. Tessier. 2007. Double extended octagonal ring (DEOR) drawbar dynamometer. Journal of Soil and Tillage Research 93:462-471.   DOI
6 Choi, S. H., Kim, H. J., Ahn, S. H., Hong, S. H., Chai, M. J., Kwon, O. E., Kim, S. C., Kim, Y. J., Choi, C. H and H. S. Kim. 2013. Modeling and simulation for a tractor equipped with hydro-mechanical transmission. Journal of Biosystems Engineering 38(3):171-179.   과학기술학회마을   DOI
7 Coffman, B. A., Kocher, M. F., Adamchuk, V. I., Hoy, R. M and E. E. Blankenship. 2010. Testing fuel efficiency of a tractor with a continuously variable transmission. Applied Engineering in Agriculture 26(1):31-36.   DOI
8 Decker, W. F., Wilson, W. A and M. L. Crawford. 1979. Construction of a large transverse electromagnetic cell. NBS Tech Note 1011. Washington D.C. UNT Digital Library.
9 Drury, C. G and M. R. Clement. 1978. The effect of area, density, and number of background characters on visual search. The Journal of the Human Factors and Ergonomics Society 20(5):597-602.   DOI
10 EC. 2013. European Commission, Enterprise and Industry DG, B - 1049 Brussels (Belgium).
11 EEC. 1974. Directive EU 74/346/EEC. Rear view mirrors- On the approximation of laws of the member states relating to rear-view mirrors for wheeled agricultural or forestry tractors. European Commission, Enterprise and Industry DG, B - 1049 Brussels (Belgium).
12 Fanger, P. O. 1973. Thermal comfort, New York: McGraw- Hill Book Co. New York, 1973, pp. 244.
13 Gorabal, S. V., Kurbet, S. N., Appukuttan, K. K and V. V. Kuppast. 2011. Two dimensional vibration isolations for a passenger seat using semi-active pneumatic and hydro-pneumatic friction damper suspension system. International Journal of Advanced Engineering Sciences and Technologies 6(1):150-156.
14 Freris, N. M and P. R. Kumar. 2007. Fundamental limits on synchronization of affine clocks in networks. In: Proceedings of the 46th IEEE Conference on Decision and Control, New Orleans, USA.
15 GIA. 2013. Rising demand for agricultural produce and advanced tractors drives the global farm tractors market, Global Industry Analysts, Inc., USA.
16 Godwin, R. J., Reynolds, A. J., O'Dogherty, M. J and A. A. Al-Ghazal. 1993. A triaxial dynamometer for force and management measurement on tillage implements. Journal of Agricultural Engineering Research 55: 189-205.   DOI
17 Grisso, R., Vaughan, D. H., Perumpral, J. V., Roberson, G. T., Pitman, R and R. M. Hoy. 2009. Using tractor test data for selecting farm tractors. Virginia Cooperative Extension Publication 442-072, 1890 Extension Program, Virginia State, Petersburg.
18 Grisso, R. D., Kocher, M. F. and D. H. Vaughan. 2004. Predicting tractor fuel consumption. Applied Engineering in Agriculture 20(5):553-561.   DOI
19 Lund, M and L. Butters. 2011. An investigation and comparison into operator field of vision for modern tractor cabs. Scientific Papers, University of Agronomic Sciences and Veterinary Medicine, Bucharest, Series A, Agronomy, Vol. LIV (1):414-419.
20 Leonard, J. J. 1980. An extended-octagon rigid drawbar dynamometer. Agricultural Engineering Australia 9(1):3-8.
21 Masuda, K., Tagi, H., Saito, Y and Y. Fukumoto. 2009. A proposal for an efficient EMI measurement method in a fully anechoic room. In: International Symposium on Electromagnetic Compatibility, Kyoto, 21R2-2, pp. 113-116.
22 Mangado J., Arana., J. I., Jaren, C., Arnal, P., Arazuri, S and J. L. P. de Leon. 2007. Development and validation of a computer program to design and calculate ROPS. Journal of Agricultural Safety and Health 13(1):65-82.   DOI
23 Mark, T. MA., Kanda, M., Crawford, M. L and E. B. Larssen. 1985. A review of electromagnetic compatibility/interface measurement methodologies. In: Proceedings of the IEEE. 73(3):388-411.   DOI
24 Marsili, A., Ragni, L., Santoro, G., Servadio, P and G. Vassalini. 2002. Innovative systems to reduce vibrations on agricultural tractors: comparative analysis of acceleration transmitted through the driving seat. Biosystems Engineering 81(1):35-47.   DOI
25 Mattetti, M., Molari, G and A. Guarnieri. 2012. Optimization of a three point hitch in an agricultural tractor. In: International Conference of Agricultural Engineering, CIGR-AgEng 2012, Valencia, Sapin.
26 Mills, D. L. 1992. Network time protocol (version 3) specification, implementation and analysis. RFC 1305, Internet Engineering Task Force Network Working Group, University of Delaware.
27 Park, S. H., Kim, Y. J., Im, D. H., Kim, C. K., Jang, Y and S. S. Kim. 2010. Analysis of factors affecting fuel consumption of agricultural tractor. Journal of Biosystems Engineering 35(3):151-157.   과학기술학회마을   DOI
28 NTTL. 2013. Nebraksa Tractor Test Laboratory, 134 Splinter Labs, UNL, East Campus, Lincoln.
29 OECD. 2012a. OECD code 2. OECD standard code for the official testing of agricultural and forestry tractor performance. OECD, Parish. France. Available at www.oecd.org.
30 OECD. 2012b. OECD code 4. OECD standard code for the official testing of protective structures on agricultural and forestry tractors (static test). OECD, Parish. France. Available at www.oecd.org.
31 OECD. 2013. Standard codes for the official testing of agricultural and forestry tractors. OECD, Parish. France. Available at www.oecd.org.
32 Olejnik, K. 1999. Report 0110/R71/ZBH/98 from the agricultural tractor research URSUS 2812 /KMF-235/1 aspect of driver's visibility zone corresponding with Regulation 71 EKG correction 00, and in rear mirrors. ITS work. Warsaw.
33 Olejnik, K. 2005. Agricultural tractor driver's limitations of visual transmission in aspect of road safety in Poland. TEKA, Commission of motorization and energetics in agriculture. An International Journal on Motorization, Vehicle Operation, Energy Efficiency and Mechanical Engineering 5:158-167.
34 Parsons, K. 2003. Human thermal environments: The effects of hot, moderate and cold environments on human health, comfort and performance. 2nd ed. Taylor & Francis, London.
35 Scarlett, A. J. 2009. In-service assessment of agricultural trailer and trailed appliance braking system condition and performance. The agricultural trailer braking study. RR697 Research report for the Health and Safety Executive (HSE), Scarlett Research Limited, Biggleswade, UK.
36 Pessina, D., Facchinetti, D and M. Belli. 2010. Definition of unambiguous criteria to evaluate tractor ROPS equivalence. In: XVIIth World Congress of the International Commission of Agricultural and Biosystems Engineering (CIGR), Canadian Society for Bioengineering (CSBE/SCGAB), Quebec City, Canada.
37 Pexa, M., Cindr, M., Kubin, K and V. Jurca. 2011. Measurements of tractor power parameters using GPS. Research in Agricultural Engineering 57(1):1-7.
38 Rondelli, V., Capacci, E., Franceschetti, B and A. Guarnieri. 2012. ROPS design evolution with respect to the requirements of the strength test procedures. In: International Conference of Agricultural Engineering, CIGR-AgEng, Valencia, Spain.
39 Ruzic, D. 2011. Improvement of thermal comfort in a passenger car by localized air distribution. ACTA Technica Corviniensis-Bulletin of Engineering, pp. 63-67.
40 Ruzic, D and F. Casnji. 2011a. Agricultural tractor cab characteristics relevant for microclimatic conditions. Journal of Applied Engineering Science 9(2):323-330.
41 Ruzic, D and F. Casnji. 2011b. Personalized ventilation concept in mobile machinery cab. International Journal for Vehicle Mechanics, Engines and Transportation Systems 37(1):9-22.
42 Scarlett, A. J., Price, J. S and R. M. Stayner. 2007. Whole-body vibration: Evaluation of emission and exposure levels arising from agricultural tractors. Journal of Terramechanics 44:65-73.   DOI
43 Hwang, K. Y and K. U. Kim. 2009. Evaluation of environmental comfort of tractor cabs. Journal of Biosystems Engineering 34(1):1-7.   과학기술학회마을   DOI
44 Hansson, P. A., Lindgren, M and O. Noren. 2001. A comparison between different methods of calculating average engine emissions for agricultural tractors. Journal of Agricultural Engineering Research 80(1): 37-43.   DOI
45 Havasi, M. R., Shiekhdavoodi, M. J., Shini, N. A and M. Sami. 2012. Design, development and evaluation of a digital tractor dynamometer. Asian Journal of Agricultural Sciences 4(2):145-148.
46 Hoag, D. L and R. R. Yoerger. 1975. Analysis and design of load rings. Transactions of the ASAE 19(4):995-1000.
47 ISO. 2013. International Organization for Standardization. ISO central secretariat, Geneva.
48 IEEE. 2002. IEEE-$1588^{TM}$. Standard for a Precision Clock Synchronization Protocol for Networked Measurement and control Systems. Available at: http://ieee1588.nist.gov.
49 Ingle, C. 2011. Agricultural tractor test standards in America. CMGT 564 Strategic Standards, The Catholic University of America.
50 ISO. 1981. ISO 5721- Tractor's for agriculture - Operator's field of vision. International Organization for Standardization, ISO central secretariat, Geneva.
51 Janulevicius, A., Juostas, A and G. Pupinis. 2013. Engine performance during tractor operational period. Journal of Energy Conversion and Management 68: 11-19.   DOI
52 Taylor, B. N and C. E. Kuyatt. 1994. Guidelines for evaluating and expressing the uncertainty of NIST Measurement Results, NIST Technical Note 1297, U.S. Department of Commerce.
53 Stellini, I. M. 2009. Evaluation of uncertainty and repeatability in measurement: two application studies in synchronization and EMC testing. Ph.D. Thesis, Department of Information Engineering, University of Padova.
54 Stojic, B., Casnji, F and A. Poznic. 2011. The role of the mechatronics in technological development of the contemporary agricultural tractors. ACTA Technica Corviniensis-Bulletin of Engineering, pp. 59-62.
55 Stone, M. L., McKee, K. D., Formwalt, C. W and R. K. Benneweis. 1999. ISO 11783: An electronic communications protocol for agricultural equipment. In: Agricultural Equipment Technology Conference. pp. 1-17, Louisville, Kentucky, USA.
56 Tippet, J. C., Chang, D. C and M. L. Crawford. 1976. An analysis and experimental determination of the cutoff frequencies of higher-order TE modes in a TEM cell, NBSIR 76-841.
57 Venem, M. T., Shutske, J. M and W. J. Gilbert. 2006. Testing and creation of a safety system to disengage the PTO of a tractor. Applied Engineering in Agriculture 22(1): 5-12.   DOI
58 Younis, S. M., Elashry, EL. S. R., Bahnasy, A. F. and I. M. Elsybaee. 2010. Development a local system for measuring tractors performance. Misr Journal of Agricultural Engineering 27(1):34-53.
59 Johnson, T. V. 2010. Review of $CO_2$ emissions and technologies in the road transportation sector. SAE International Journal of Engines 3(1):1079-1098.   DOI
60 Jiankang, W., Mingliang, W., Ping, J., Songlin, S and X. Fangping. 2011. Application of DC electric dynamometer in the PTO power test of tractors. In: Proceedings of Fourth International Conference on Intelligent Computation Technology and Automation (ICICTA). Shenzhen, China.
61 Kaminski, Z and J, Czaban. 2012. Diagnosing of the agricultural tractor braking system within approval tests. Journal of Maintenance and Reliability 14(4): 319-326.
62 Ajdadi, R. F and Y. A. Gilandeh. 2011. Artificial neural network and stepwise multiple range regression methods for prediction of tractor fuel consumption. Journal of the International Measurement Confederation 44: 2104-2111.   DOI
63 Kim, Y., Lee, S., Kim, J., Kang, D and H. Choi. 2013. Testing of agricultural tractor engine using animal-fats biodiesel as fuel. Journal of Biosystems Engineering 38(3): 208-214.   과학기술학회마을   DOI
64 Lenain, R., Hugo, E and T. Langle. 2010. Sensitivity of the absorbed energy into a ROPS during a rollover situation: Comparison to the security level proposed into OECD Code 4. In: International Conference on Agricultural Engineering, Clermont-Ferrand, France.
65 Ahokas, J and S. Kosonen. 2003. Dynamic behaviour of a tractor-trailer combination during braking. Biosystems Engineering 85(1):29-39.   DOI
66 Alfaro, J. R., Arana, I., Arazuri, S and C. Jaren. 2010. Assessing the safety provided by SAE J2194 Standard and Code 4 Standard code for testing ROPS, using finite element analysis. Biosystems Engineering 105: 189-197.   DOI
67 Tippet, J. C. 1978. Modal characteristics of rectangular coaxial transmission line. PhD dissertation, Dept. of Electrical Engineering, University of Colorado, Boulder.
68 Kim, S. C., Kim, K. U and D. C. Kim. 2011. Prediction of fuel consumption of agricultural tractor. Applied Engineering in Agriculture 27(5):705-709.   DOI
69 Bovenzi, M and A. Betta. 1994. Low-back disorders in agricultural tractor drivers exposed to whole-body vibration and postural stress. Applied Ergonomics 25:231-241.   DOI
70 Watanabe, S., Melikov, A. K and G. L. Knudsen. 2010. Design of an individually controlled system for an optimal thermal microenvironment. Building and Environment 45(3):549-558.   DOI