• Journal of electromagnetic engineering and science
• /
• v.18 no.3
• /
• pp.169-174
• /
• 2018

In this paper, we propose an estimation method using multiple in-phase and quadrature (IQ) signals of different frequencies to evaluate the sample-time errors in the sampling oscilloscope. The estimator is implemented by ODRPACK, and a novel iteration scheme is applied to achieve fast convergence without any prior information. Monte-Carlo simulation is conducted to confirm the proposed method. It clearly shows that the multiple IQ approach achieves more accurate results compared to the conventional method. Finally, the criteria for the frequency selection and the signal capture time are investigated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.47-54
• /
• 2013

This paper introduces a W-band millimeter-wave power standard transfer system using the direct comparison method. The transfer system was developed to evaluate the effective efficiency and calibration factor of a W-band waveguide power sensor. The evaluation method and the measured results of the directional coupler that characterizes the calibration system are studied. The uncertainties of the standard transfer system are investigated, and the major uncertainty contributors are discussed as well. The performance of the realized W-band power standard transfer system was verified by comparing results with reference values.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.88-93
• /
• 2018

Radio frequency (RF) and microwave power is one of the key quantities in the framework of electromagnetic measurement standards. Therefore, the stability of the power standard is essential to users' reliable measurements in various areas. Coaxial and waveguide thermistor mounts are used as transfer standards of RF and microwave power. Over decades, the effective efficiencies of thermistor mounts have been measured using coaxial and waveguide microcalorimeters in the frequency range of 10 MHz-40 GHz. The measurement uncertainty of the effective efficiency is evaluated. Results show that the power standards have been well maintained within the measurement uncertainty.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.7-14
• /
• 2021

Recently, the amount of electrical and electronic systems is increasing rapidly with the development of advanced vehicles such as ADAS, smart cars, connected cars, automated driving systems. It is necessary to examine the electromagnetic compatibility of vehicles equipped with those systems. The standards and regulations for examination of electromagnetic compatibility have been established and revised according to newly introduced electrical and electronic systems. They are administered in some different international standard associations such as ISO, CISPR, UN/ECE and are somewhat complex and bulky. In the study, the improvements and changes in them are tracked and analyzed chronologically. Research of the history of them will be helpful for understanding progress and forecasting the direction of development.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.426-433
• /
• 2014

The high-altitude electromagnetic pulse(HEMP) generated by a high-altitude nuclear explosion. This paper presents the comparison of electric field penetration in Bell laboratories and IEC 61000-2-9 standard when HEMP source penetrates through Naval Warship conducted coupling path and radiated coupling path. Also we analyze the effects of two kinds of coupling and propose Protective measures. Simulation results confirm IEC 61000-2-9 standard is more strict than the Bell Laboratories standard except for a lower frequency band, so we proposed IEC 61000-2-9 standard as a Naval HEMP standard. Finally, we offer the protective measures such as the shielding coating, Honeycomb ventilation, TVS in order to meet the military criteria.

• Electronics and Telecommunications Trends
• /
• v.34 no.3
• /
• pp.86-92
• /
• 2019

New products and services, such as 5G and wireless power transmission equipment, have recently brought about changes in the field of electromagnetic technology. There is a need for the evaluation and measurement of the health effects of such technology. To address this need, the development of international standards related to human exposure to electromagnetic waves of these new technologies are currently being discussed. This article briefly introduces the International Standard Organization standards for human exposure to electromagnetic waves, and focuses on the major standard trends for SAR measurement techniques that employ vector probes, wireless power transfer, and 5G base station measurement.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.224-231
• /
• 2015

A comparison of the antenna parameters for R-band (1.7-2.6 GHz) and S-band (2.6-3.95 GHz) standard gain horn antennas has been performed by the Korea Research Institute of Standards and Science (KRISS), together with seven domestic participants from private companies and public institutions. Its purpose, as a proficiency test program of the 'Antenna Measurement Club' of KRISS, was to check equivalences in antenna parameter measurements between KRISS and the participants, particularly in the R-/S-band, to support antenna manufacturers and end users in Korea. The measurement parameters of this comparison are the power gain, radiation pattern, and reflection coefficient of the traveling standards for R-/S-band pyramidal standard gain horn antennas. The comparison used a gain comparison method and an extrapolation method to measure the power gain of the two traveling standards; the radiation patterns were measured in the far-field region of the transmitting and receiving antennas.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.63-69
• /
• 2012

This paper presents the design of a calculable standard dipole antenna with a hybrid balun in the frequency range of 1 GHz to 3 GHz. A new formula of the antenna factor for a dipole antenna with a hybrid balun is derived using the power mismatch-loss concept. The antenna factors derived in this paper are in good agreement with the results calculated from S-parameters. The design results show that the calculable dipole antenna with a hybrid balun can be characterized by power mismatch-loss component factors.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.1
• /
• pp.17-22
• /
• 2019

Nowadays many two-wheeled motorcycles are used in leisure and express delivery industries. But studies of the electromagentic compatibility on motorcycles have seldom been performed and published. This paper has studied the electromagnetic safety of motorcycles considering international and domestic regulations and standards. Also, a series of experiments have been performed to evaluate the level of electromagnetic compatibility of commercially available motorcycles. As a result, detailed experimental procedures are proposed to secure the electromagnetic safety and can be used to confirm or revise the Korea Motor Vehicle Safety Standards.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.61
• /
• pp.87-98
• /
• 2007