• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.591-597
• /
• 2021

본 논문에서는 전자파 방출을 줄이기 위해 필터나 디커플링 캐패시터를 사용하는 대신에 PCB 내의 칩 배치, 배선 모양 등을 변경하여 위험신호의 배선 길이와 귀환경로를 짧게 하는 EMC 고려 PCB 설계 기법을 제안하였다. 제안하는 기법에서는 PCB 상의 여러 가지 신호에 대해 신호속도를 계산하고, 신호속도가 가장 높은 위험신호에 대해 선로를 가능한 짧게 하도록 가장 먼저 칩의 위치를 선정하고 배선도 가장 먼저 수행해야 한다. 또 위험신호의 귀환경로에 불연속이 발생하지 않도록 설계하며 귀환경로의 기준이 되는 전원판과 접지판이 분할되어 있지 않도록 한다. CISPR-32, CISPR-25 등의 전자파 적합성 시험을 통과하지 못했던 차량용 블루투스 지향성 스피커에 이 기법을 적용하여 PCB를 재설계한 후 EMC 측정을 수행하였더니 해당 전자파 적합성 시험을 수월하게 통과할 수 있었다. 제안하는 기법은 EMC 특성이 중요한 전자기기에 유용하게 쓰일 수 있다.

• 한국주거학회논문집
• /
• 제20권1호
• /
• pp.101-112
• /
• 2009

The purpose of this study is to find out the preference and the needs of old womens on the life support appliances i.e. medication dispenser, video phone, activity monitor and sleep monitor. The appliances may be improved reflecting the result of the questionnaire asking about the preferred functions and designs. The respondents were 141 female seniors of 65 years and older, living in Ulsan city or Cheongju city, Korea. Following is the list of results. (1) The medication dispenser, responded as highly preferred, met some worries over the troubles by power stoppage especially while one is out, letting her forget the medication time. (2) The video phone was worried over the cases of hearing failure by small sound, and watching failure by weakening sight. (3) The activity monitor, like the medication dispenser, was worried about the troubles while one is out or out of the monitoring scope, its expense, and the privacy, (4) The sleep monitor met the worries over the inadequacy for the sleeping mat on the floor and the emission of electromagnetic waves. (5) The preferred designs were (1) white or red standing medication dispenser, (2) wall-mounted video phone working by voice, (3) metal activity monitor sensor with white or yellow bracelet.

• 한국연소학회지
• /
• 제17권1호
• /
• pp.58-65
• /
• 2012

The influence of magnetic field on propane and acetylene diffusion flames have been experimentally investigated using an electromagnetic system. Periodically induced magnetic field having various frequencies and duty ratios was established in square wave form. The maximum intensity and gradient of magnetic field were 1.3 T and 0.27 T/mm, respectively. The width of a propane flame was reduced up to 4.5% and the brightness was enhanced up to 25% when the magnetic field was induced. The soot emission from an acetylene flame was ceased when magnetic field was induced. The alteration of flow field, which is due to the paramagnetic characteristics of oxygen molecule, is most likely to be responsible for the change in flame size and brightness. The effect of magnetic field on diffusion flames, which competes with the gravitational effect, was more apparent from a smaller size flame. The magnetic field effect, therefore, could be important under microgravity conditions. Since the time required to alter the flow field must be finite, the magnetic field effect is likely to be less significant for a periodically oscillating magnetic field at a high frequency or having a small duty ratio.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.20-23
• /
• 2001

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. The mold for forming the barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing processes such as screen printing, sand-blasting and photosensitive glass methods. The mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper, Stripes of grooves of which width 48${\mu}{\textrm}{m}$, depth 124$\mu\textrm{m}$ , pitch 274$\mu\textrm{m}$ was acquired by machining of single crystal silicon with dicing saw blade. Maximum roughness of the bottom of the grooves was 59.6nm Ra in grooving Si. Barrier ribs were formed with silicone rubber mold, which is transferred from grooved Si forming hard mold. Silicone rubber mold has the elasticity, which enable to accommodate the waveness of lower glass plate of PDP. The methods assisted by the microwave and UV was adopted for reducing the forming time of glass paste.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.129-133
• /
• 2005

분자 에너지 준위, 분자구조, 흡수, 방출, 상호분자 반응, 또는 약하게 결합된 분자에너지, 광화학, 형광, PDT치료에 관한 연구를 수행하는데 분광계에서 CCD는 매우 중요하다. CCD는 현대 물리화학 분야에서 레이저 분광학에 의한 의공학 및 분자 구조의 연구에 필수적이다. 그리하여 CCD를 이용한 전자기 분광계의 설계 및 제작을 연구하였으며 프린트된 전자회로 및 포르폴린을 분석하였다. 예전에 CCD는 방송장비에만 사용한다고 생각했지만 현대에는 산업발전에 의한 응용으로 로봇공학, 기기분석 및 관측에 대한 산업적 요구에 더욱 많이 활용된다.

• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.276-281
• /
• 2016

Carbonyl iron (CI) is successfully incorporated as an additive into a polystyrene (PS) matrix via a highenergy ball milling method, under an n-hexane medium with volume fractions between 1% and 5% for electromagnetic interference shielding applications by the combination of magnetic CI and an insulating PS matrix. The morphology and the dispersion of CI are investigated by field emission scanning electron microscopy, which indicates a uniform distribution of CI in the PS matrix after 2 h of milling. The thermal behavior results indicate no significant degradation of the PS when there is a slight increase in the onset temperature with the addition of CI powder, when compared to the as-received PS pellet. After milling, there are no interactions between the CI and the PS matrix, as confirmed by Fourier transformed infrared spectroscopy. In this study, the milled CI-PS powder is extruded to make filaments, and can have potential applications in the 3-D printing industry.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.207-212
• /
• 2014

With increased interests in environmental issues, people are looking for new materials that serve special and bio-activated functions. One of interesting materials is charcoal which has excellent adsorption ability for harmful volatile organic compounds, fireproof performance, far-infrared ray emission, and electromagnetic shielding. Since non-crack carbonized board was developed from wood-based composite materials, carbonization method might be applied to woodcraft products such as wood cup and bamboo. In this study, manufacture of wood charcoal bowl was conducted with carbonization method developed in 2009 in order to activate wood products market. Ash tree(Fraxinus rhynchophylla) cup was carbonized at $600^{\circ}C$ with two pretreatments which were phenol resin and wood tar solution treatment. After carbonization of ash tree cup, non-crack charcoal cup were successfully manufactured. Phenol resin treatment affected on charcoal cup manufacturing both positively and negatively. For a positive way, it prevented shrinkage. For a negative way, it decreased water repellency. On the contrary, wood tar treatment accelerated shrinkage a bit and increased water repellency. Based on the results, wood tar can be used as pre-treatment solution for reducing post-treatment costs. We confirmed woodcraft products can be carbonized without deformation, so carbonization may provide a high value-added products from wood.

• 항공우주기술
• /
• 제10권2호
• /
• pp.82-86
• /
• 2011

본 논문에서는 통신해양기상위성의 TM 안테나[2.290 GHz]에 의해 발생된 RF가 발사체 PROTON M/Breeze M long 패어링 안에서 형성되는 전기장의 세기를 예측한다. 위성이 TM을 내보내기 위해 의도적으로 방사하는 전기장의 세기는 PROTON M / BREEZE M 패어링의 특성을 고려함으로써 예측될수 있다. 다른 정지궤도 발사체는 PROTON의 패어링과 유사한 특성을 갖기 때문에, 예측된 결과가 다른 발사체에도 적용될 것이라 예상된다. 해석결과로써, 패어링내의 전기장의 세기는 위성 본체와는 전자파 적합성 요구사항을 만족하나, 발사체 PROTON M/Breeze M과는 전자파 적합성 요구사항을 만족하지 못한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.505-506
• /
• 2006

PD(partial discharge) occurred from variable PD sources in air may be the cause of breakdown in high voltage equipment which affect huge outage in power system. Identification and localization of PD sources is very important for engineer to cope with huge accident beforhand. PD phenomena can be detected by acoustic emission sensor or electromagnetic sensor like antenna. This paper has investigated the identification method using PCA(principal component analysis) for the PD signals from variable PD sources, for which the electric field distribution and PD inception voltages were simulated by using commercial FEM program. PD signals was detected by ultra wideband antenna. Their own features were extracted as the frequency coefficients transformed with FFT(fast fourier transform) and used to obtain independent pincipal components of each PD signals.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.278-287
• /
• 2019

In this study, a zero-crossing spike current issue in a totem-pole bridgeless power factor correction (PFC) converter is comprehensively investigated for the first time. Spike current occurs when input voltage crosses zero, becomes a noise source, and causes severe common mode emission issues. A generation mechanism for electromagnetic interference (EMI) is presented to investigate the EMI problem caused by zero-crossing issue, and a noise spectrum due to this issue is predicted by a theoretical analysis based on the Fourier coefficient of an approximate spike current waveform. Furthermore, a noise reduction method is proposed and then improved to reduce the spike current. Experimental measurements are implemented on a GaN-based totem-pole bridgeless PFC converter, and the spike current can be effectively suppressed through the proposed method. Furthermore, the noise spectrums measured without and with the reduced zero-crossing spike current are compared. Experimental results validate the analysis of the noise spectrum caused by the zero-crossing spike current issue.