• 제목/요약/키워드: Electromagnetic emission

검색결과 188건 처리시간 0.032초

통신해양기상위성 복사감응과 정지궤도 발사체 복사방출에 대한 EMC 해석 (EMC Analysis between the COMS RS and the GEO Launch Vehicles RE)

  • 김의찬;한조영;이호형
    • 항공우주기술
    • /
    • 제8권2호
    • /
    • pp.33-40
    • /
    • 2009
  • 본 논문에서 [1MHz-47MHz]의 주파수 범위에서의 통신해양기상위성과 정지궤도 발사체와의 예비적인 EMC 해석 과정을 기술한다. 정지궤도용 발사체 최대 복사 방출 한계치와 위성의 최대 복사 감응 한계치와 비교한다. 전자파 호환이 되지 않는 발사체로는 land launch와 소유즈가 있다. 만약에 이 발사체가 선정된다면 위성체 레벨에서 전자파 시험을 통하여 검증하여야 한다.

  • PDF

엔진 냉각수 유량 단속에 의한 디젤 차량의 연비 및 배기가스 특성 연구 (A Study on the Characteristics of Fuel Consumption and Emissions of Diesel Vehicles Using Engine Coolant Flow Rate On/Off Control)

  • 김성철
    • 한국산학기술학회논문지
    • /
    • 제14권5호
    • /
    • pp.2069-2074
    • /
    • 2013
  • 내연기관 차량에 전자기식 클러치 워터펌프의 적용은 연비 향상 및 배기가스 저감을 꾀할 수 있다. 이러한 클러치 워터펌프는 엔진 냉각시스템의 유량 단속에 의하여 최적 운전 조건을 가능케 한다. 본 연구에서는 클러치 워터펌프를 이용한 냉각시스템을 제어함으로써 디젤 차량의 연비 및 배기가스 특성을 살펴보았다. 전자기식 클러치 워터펌프에 의한 저온 시동시 냉각수 흐름을 차단하여 아이들 조건에서 예열 시간을 기존 워터펌프 대비 49% 정도 단축시켰고, 주행 중에는 냉각수가 최적 고온상태를 유지하도록 제어하였다. 그리하여 NEDC 모드에서 연소 효율이 개선되어 최대 5% 정도의 연비 향상 효과를 나타내었다. 또한 NOx를 제외한 HC, CO 및 $CO_2$ 배기가스의 농도가 전반적으로 감소하였다.

항공용 모터 조립체의 전자기 간섭 감쇠 방안 (Electromagnetic Interference Suppression Method of Motor Assembly for Aircraft Application)

  • 김지흥;유홍균;박범준;박영주
    • 한국항행학회논문지
    • /
    • 제22권5호
    • /
    • pp.351-358
    • /
    • 2018
  • 본 연구에서는 개발된 모터 조립체의 누설 잡음신호 감쇠 방안을 시험을 통해 제안한다. 개발된 장치는 항공기 외부에 장착되어 안테나를 회전시키기 위한 장치로서 전자기 간섭 측면에서 MIL-STD-461F의 RE102 요구규격을 충족해야한다. RE102 시험결과를 통해 장치의 누설 잡음신호가 전원 및 제어 케이블을 통한 외부 유입과 모터 회전에 의해 발생됨을 확인하였다. 그리고 회전을 위해 내 외부의 물리적 차폐가 어려운 부분에서 잡음신호가 누설됨을 확인하였다. 누설 잡음신호에 대한 감쇠를 위해 장치 동작을 고려한 전기적 접지 보강, 전기적 차폐 구조를 적용하여 시험을 수행했고 규격 충족 여부를 확인하였다. 최종적으로 잡음누설 경로에 맞물리는 형태를 갖는 원형 주름 초크 구조와 전도성 그리스를 함께 적용하여 요구규격을 충족함을 확인하였다.

Modeling and Control Method for High-power Electromagnetic Transmitter Power Supplies

  • Yu, Fei;Zhang, Yi-Ming
    • Journal of Power Electronics
    • /
    • 제13권4호
    • /
    • pp.679-691
    • /
    • 2013
  • High-power electromagnetic transmitter power supplies are an important part of deep geophysical exploration equipment. This is especially true in complex environments, where the ability to produce a highly accurate and stable output and safety through redundancy have become the key issues in the design of high-power electromagnetic transmitter power supplies. To solve these issues, a high-frequency switching power cascade based emission power supply is designed. By combining the circuit averaged model and the equivalent controlled source method, a modular mathematical model is established with the on-state loss and transformer induction loss being taken into account. A triple-loop control including an inner current loop, an outer voltage loop and a load current forward feedback, and a digitalized voltage/current sharing control method are proposed for the realization of the rapid, stable and highly accurate output of the system. By using a new algorithm referred to as GAPSO, which integrates a genetic algorithm and a particle swarm algorithm, the parameters of the controller are tuned. A multi-module cascade helps to achieve system redundancy. A simulation analysis of the open-loop system proves the accuracy of the established system and provides a better reflection of the characteristics of the power supply. A parameter tuning simulation proves the effectiveness of the GAPSO algorithm. A closed-loop simulation of the system and field geological exploration experiments demonstrate the effectiveness of the control method. This ensures both the system's excellent stability and the output's accuracy. It also ensures the accuracy of the established mathematical model as well as its ability to meet the requirements of practical field deep exploration.

PCB 접지면 갭이 불요전자파 방사에 미치는 영향 (The Effect of Ground Plane Gap on the Radiated Emission)

  • 하재경;김형훈;김형동
    • 한국전자파학회논문지
    • /
    • 제9권5호
    • /
    • pp.648-658
    • /
    • 1998
  • 본 논문에서는 PCB (printed circuit board) 접지면에 셜치된 캡(gap)이 불요전자파 방사에 미치는 영향을 정 량적으로 해석하였다. 본 연구의 해석법으로 복잡한 구조체의 전자기적 특성을 해석하는데 주파수영역 전자파 수치해석 방법들과 비교하여 여러 가지 장점올 가지는 시간영역 해석법인 FDTD(finite difference time dom main) 방법올 사용하였다. 해석 구조체는 일반적으로 생산되는 PCB와 유사한 크기를 선정하였으며 소자충은 전압원과 마이크로스트립만이 폰재하는 단순화된 구조이다. PCB 접지변에 설치된 캡에 의해 생기는 인덕턴스 의 크기와 입출력 케이블올 통한 불요전자파 방사량을 FCC 및 CISPR 규정치와 함께 제시하였으며 갱의 크기 에 따라 방사되는 불요전자파의 세기가 크게 변화되는 것을 관찰할 수 있다. 본 논문의 해석결과는 실제 PCB 셜 계에 있어서 잘봇된 캡의 설치로 인한 불요전자파 방사를 막는데 유용하게 사용될 수 있으리라 생각된다.

  • PDF

Multi-wavelength Study of Blazars Using Variability as a Tool

  • Baliyan, Kiran S.;Kaur, Navpreet;Chandra, Sunil;Sameer, Sameer;Ganesh, Shashikiran
    • Journal of Astronomy and Space Sciences
    • /
    • 제33권3호
    • /
    • pp.177-183
    • /
    • 2016
  • Active galactic nuclei (AGN) are too compact to be resolved by any existing optical telescope facility, making it difficult to understand their structure and the emission processes responsible for their huge energy output. However, variability, one of their characteristic properties, provides a tool to probe the inner regions of AGN. Blazars are the best candidates for such a study, and hence a considerable amount of effort is being made to investigate variability in these sources across the electromagnetic spectrum. Here, using the Mt. Abu infrared observatory (MIRO) blazar monitoring program, we present intra-night, inter-night, and long term aspects of the variability in S5 0716+71, 3C66A, and OJ 287. These stars show significant variability on short (a few tens of mins, to a few hours, to a few days) to long term (months to years) timescales. Based on the light travel time argument, the shortest variability timescales (micro-variability) provide upper limits to the size of the emission region. While S5 0716 shows a very high duty cycle of variability (> 80 %), 3C66A shows a much lower intra day variability (IDV) duty cycle (< 20 %). All three show rapid variations within 2.5 to 3.5 hr, which, perhaps, are generated near the vicinity of black holes. Assuming this, estimates of the masses of the black holes are made at ~109, 8×108, and 2.7×109 M for S5 0716+71, 3C66A, and OJ 287, respectively. Multi-wavelength light-curves for the blazar PKS 1510-089 are discussed to infer the emission processes responsible for the recent flaring episodes in this source.

하이브리드 자동차 배터리의 고주파 해석 모델링 (High-Frequency Analysis Modeling of Hybrid Vehicle Battery)

  • 이재중;이준상;김미로;권혁수;나완수
    • 전기학회논문지
    • /
    • 제61권2호
    • /
    • pp.263-269
    • /
    • 2012
  • In order to present that the electromagnetic compatibility standards following the frequency goes up which is based automotive electronics, in this paper, a hybrid/electric vehicle battery which reflects the frequency of the equivalent circuit model is introduced. By using this circuit modeling, the impedance characteristics can be analysed and an analyze of battery one cell is finished. Using this model, each different from the discharging situation, the discharge characteristic curve could be led. Basic theoretical approaches and measuring results through MATLAB and experimental validation of the EIS measurement equipment was used.

EMTP를 이용한 전기자동차용 급속 충전시스템 모델링 (The Modeling of EV Fast Charging System using EMTP)

  • 주성철;심형욱;이제원;김철환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.203-204
    • /
    • 2011
  • There is a growing interest on Electric Vehicles due to global warming and greenhouse gas emission issue. Recently, new technologies of EV fast charging are continually being developed and power supply infrastructure technologies are being developed widely. In general, the fast charging system consists of AC-DC converter, DC-DC converter, and filters. This paper performs modeling of Electric Vehicle fast charging system using EMTP(Electromagnetic transient program).

  • PDF

전이원소 산화물의 온도변화에 따른 원적외선 복사특성 (Far Infrared Radiation Characteristics by Temperature Variation of Transition Element Oxides)

  • 박종옥;최태섭
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제9권6호
    • /
    • pp.32-40
    • /
    • 1995
  • Far Infrared radiators should have functionality to convert thermal energy into an electromagnetic wave. In order to apply the Far Infrared to the substance, the absorption characteristics of the substance should be considered. In this paper, interrelation of emissivity with emission energy according to temperature in the range of [$2.5\mu\textrm{m}$] to 25[$\mu\textrm{m}$] after the transition element oxides (MnO2, Fe2O3, CuO, Co3O4) of first grade reagent were molded in press, then they were sintered in [$1050^{\circ}C$], and they were used as samples.

  • PDF

분광기에 고 분해능 Charge Coupled Device의 설계 및 제작에 의한 Hematoporphyrin Derivative의 분석 (Analysis of Hematoporphyrin Derivative by Design and Manufacture of High Resolution Charge Coupled Device in Spectrometry)

  • 김기준
    • 한국응용과학기술학회지
    • /
    • 제22권1호
    • /
    • pp.77-83
    • /
    • 2005
  • The influence of fluorescence, scattering, and absorbance in turbid material by light scattering was interpreted by the scattered fluorescence intensity and wavelength. The effect of optical property in scattering media was investigated. It is very important to study the charge coupled device(CCD) in spectrometry because we can use the molecular energy level, molecular structure, absorption or emission, intermolecular reaction, weakly bound molecular energy, photochemistry, fluorescence and photodynamic therapy. CCD is very essential to study the molecular structure and medical engineering combined laser spectroscopy in the modem physical and chemistry. Accordingly, this study has designed and manufactured the electromagnetic spectrometry with CCD, and has analyzed the hematoporphyrin derivative.