• 정보통신설비학회논문지
• /
• 제9권1호
• /
• pp.19-23
• /
• 2010

The Electromagnetic Interference could occur due to power line on the telecommunication service. The Countermeasure is practised by legal law. Various affecting factors are described in the law. In this paper, an effect by pipeline especially in the ground, power feeding plant, and curved railway sector is analyzed as environmental factors which are not included in the law. By the practical measurement, it appears that the measured voltages on the spots with underground pipeline are grouped into lower voltage level, induced voltage tends to be high near power feeding plant, and also in the curved railway line. These analytical results can be meaningly considered in the application of countermeasure.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 공동학술대회 논문집
• /
• pp.197-202
• /
• 2005

최근 제주도에서 실시된 자기지전류(Magnetotelluric) 탐사 자료에서 일본의 Kii 반도 남동쪽 해상에서 발생한 지진활동과 관련된 전자기 현상이 관측되었으며, 이러한 동지진 전자기장 신호의 특성과 메카니즘을 분석하였다. 전파속도, 파워 스펙트럼의 특성, 지진 기록과의 비교, MT 임피던스의 변화, 타원분극 방향 등의 분석으로부터 전자기장 변동이 지진파 전파 과정에서 측점 주변에서 유도된 전자기장으로 판단되며, 측점 주변의 지전기 및 수리지질학적 구조에 의해 전자기장 변동이 크게 좌우됨을 알 수 있다. 전기역학적 효과의 간단한 고찰을 통해 관측된 전자기장의 크기가 이론적 근사와 유사함을 알 수 있었으며 전자기장의 파워가 가속도 파워와 밀접히 관련되어있음을 알 수 있으나 측점에 따라 전자기장의 크기와 방향이 크게 차이가 나는 것은 설명하기 위해서는 전기역학적 메카니즘 이외의 효과를 고려할 필요가 있다.

• 한국인터넷방송통신학회논문지
• /
• 제20권2호
• /
• pp.117-122
• /
• 2020

본 논문에서는 두 대의 X-대역 안테나를 활용한 시험을 통해 복수의 레이다가 적용되는 함정 통합마스트용 다기능위상배열 레이다의 인접 안테나 개구면 간 전자파 간섭 영향성을 확인하였다. 두 안테나는 시험을 위해 설계 된 통합마스트를 모사한 치구에 배치하였으며, 본 형상을 모델링하여 안테나 빔 조향 시 전자파 영향성을 전자파 해석 도구를 활용하여 분석하였다. 또한, 시험적 분석을 위해 6 가지 시험 시나리오를 설정하였으며, 각 시험 시나리오는 무반향 챔버에서 진행하였다. 시험 시 안테나 #1은 펄스 파형 송신 하였으며, 안테나 #2 부터 수신된 신호는 수신장치를 통해 광 데이터로 저장하여 신호를 분석하였다. 분석 결과를 바탕으로 통합마스트에서 복수의 다기능 레이다를 인접하여 운용 시 전자파 간섭 영향성을 제시한다.

• 대한의용생체공학회:의공학회지
• /
• 제42권1호
• /
• pp.25-30
• /
• 2021

Objective: The aim of this study is to consider the effect of skin tissue necrosis by improving blood flow in animal skin models for low frequency pulsed electromagnetic fields (LF_PEMF) stimulation. Methods: Twenty rats (Wistar EPM-1 male, 280-320 g) were randomly divided into control groups (n=10) and the PEMF groups (n=10). To induce necrosis of the skin tissue, skin flap was treated in the back of the rat, followed by isolation film and skin flap suturing. Subsequently, the degree of necrosis of the skin tissue was observed for 7 days. The control group did not perform any stimulation after the procedure. For the PEMF group, LF_PEMF (1 Hz, 10 mT) was stimulated in the skin flap area, for 30 minutes a day and 7 days. Cross-polarization images were acquired at the site and skin tissue necrosis patterns were analyzed. Results: In the control group, skin tissue necrosis progressed rapidly over time. In the PEMF group, skin tissue necrosis was slower than the control group. In particular, no further skin tissue necrosis progress on the day 6. Over time, a statistically significant difference from the continuous necrosis progression pattern in the control group was identified (p<0.05). Conclusions: It was confirmed that low frequency pulsed electromagnetic fields (LF_PEMF) stimulation can induce relaxation of skin tissue necrosis.

• 한국건축시공학회지
• /
• 제21권6호
• /
• pp.519-527
• /
• 2021

본 연구에서는 기존의 전자기파 차폐 성능이 없는 콘크리트를 대상으로 아크 금속용사 공법을 적용하여 전자기파 차폐성능을 확보하고자 한다. 이를 위해 금속 코팅의 두께에 전기적 특성을 평가하기 위해서 8 종류의(Cu, CuAl, CuNi, CuZn, Al, Zn, ZnAl, AlMg) 금속들을 두께 100, 200 및 500㎛의 금속 코팅으로 제작하여 4pin-probe로 표면에서의 전기전도도를 측정하였고, KS C 0304에 의거하여 전자기파 차폐 성능 시험을 실시하였다. 금속 코팅 시험 결과를 토대로 전자기파 차폐를 위한 최적의 금속 코팅 두께 200㎛를 제안하였으며, 이를 300×300×100mm 콘크리트 시험체에 용사하여 전자기파 차폐 성능을 분석한 결과 목표 성능 1GHz에서 80dB의 전자기파 차폐 성능이 확보됨을 확인하였다. 하지만 부착 강도의 경우 최대 1.11MPa로 목표 성능 대비 74% 이하로 확인되어 추후 콘크리트 표면에 미세한 요철을 형성하여 부착 성능을 향상시키는 연구가 필요할 것으로 판단된다.

• 복식문화연구
• /
• 제30권4호
• /
• pp.579-593
• /
• 2022

This study examines the surface characteristics, electrical conductivity, electromagnetic wave blocking characteristics, infrared (IR) transmittance, stealth function, thermal characteristics, and moisture characteristics of IR thermal imaging cameras. Nylon film (NFi), nylon fabric (NFa), and 5 types of nylon mesh were selected as the base materials for aluminum sputtering, and aluminum sputtering was performed to study IR thermal imaging, color difference, temperature change, and so on, and the relationship with infrared transmittance was assessed. The electrical conductivity was measured and the aluminum-sputtered nylon film demonstrated 25.6kΩ of surface resistance and high electrical conductivity. In addition, the electromagnetic wave shielding characteristics of the sputtering-treated nylon film samples were noticeably increased as a result of aluminum sputtering treatment as measured by the electromagnetic wave blocking characteristics. When NFi and NFa samples with single-sided sputtering were placed on the human body (sputtering layer faced the outside air) and imaged using IR thermographic cameras, the sputtering layer displayed a color similar to the surroundings, showing a stealth effect. Moreover, the tighter the sample density, the better the stealth function. According to the L, a, b measurements, when the sputtering layer of NFi and NFa samples faced the outside air, the value of a was generally high, thereby demonstrating a concealing effect, and the △E value was also high at 124.2 and 93.9, revealing a significant difference between the treated and untreated samples. This research may be applicable to various fields, such as the military wear, conductive sensors, electromagnetic wave shielding film, and others.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.363_364
• /
• 2009

Even though underground transmission cable is an essential transmission method to supply stable power for downtown and population center, interaction of electromagnetic force from fault current is very large comparing to overhead transmission line due to restricted installation space such as tunnel, etc. and close consideration is required for it. This paper presents countermeasures to reduce and release the effect of electromagnetic force with rope binding and installation of spacer and describes its efficacy through three phase short-circuit test, which will be utilized as basic materials for improvement and development of cleat, hanger, etc. to reduce and release effect of electromagnetic force in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.68-71
• /
• 2001

This paper has been studied for a comparison of the propagation and noise characteristics between ultrasonic and electromagnetic wave for the high speed communication of the short range telemetry. We analyze the propagation depth of electromagnetic and ultrasonic wave by skin depth effect and by ultrasonic loss ratio. We also studied several effects such as near field effect in electromagnetic wave and Rayleigh scattering noise of ultrasonic wave, etc. We show the experimental results of their propagation loss and modulation experiments in water. The experimental results show that both method is good for the implementation of short range telemetry.

• 한국주조공학회지
• /
• 제25권4호
• /
• pp.156-160
• /
• 2005

There are many factors that influence solidification behavior during continuous casting, e.g. include superheat, casting speed, cooling rate and holding time. However, when melt is stirred by electromagnetic force, there would be some changes in its solidification behavior compared to that of the ordinary casting process. In this study, the billets of A356 alloy with a diameter of 3 inch were fabricated with electromagnetic stirring under various conditions of superheat, casting speed and input voltage of electro magnetic stirring (EMS) device. The microstructure was also investigated under the various casting conditions and electromagnetic input voltages. When increase in input voltage, the microstructure was changed from dendritic to rosette type and finally to spheroidal. With pouring temperature, casting speed and electromagnetic input voltage were $650^{\circ}C$, 100 mm/min and 140 V, respectively, the billet with a diameter of 3 inch, which has a uniform dispersed spheroidal particles in the whole area of billet except for the surface area, was manufactured.

• 한국전자파학회논문지
• /
• 제14권3호
• /
• pp.290-295
• /
• 2003

Sheet형 전파흡수체를 제작하여 Mn-Zn페라이트의 입자크기에 따른 전파흡수능의 관계를 조사하였다. 입자 크기가 증가함에 따라 정합주파수는 낮은 쪽으로 이동하였으며, 정합주파수에서 전파흡수능은 감소하였다. 하지만 휴대폰의 사용주파수인 0.8 ㎓와 1.8 ㎓에서는 입자의 크기가 큰 것으로 구성되어 있는 전파흡수체자 작은 입자로 구성되어 있는 전파흡수체보다 우수한 전파흡수능을 나타내었다. 따라서 휴대폰용 전파흡수체를 Mn-Zn 페라이트 파우더로 제작할 경우에는 입자의 크기가 큰 것이 바람직하다고 생각된다.