• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.431-436
• /
• 2021

In this study, a new shielding method was applied to an accessory device that produces electromagnetic waves in the magnetic resonance room to prevent the generation of artifact caused by electromagnetic waves. The research method applied a new shielding made of metal plating fiber to patient surveillance CCTVs without shielding technology, and obtained and evaluated noise map when the power was not cut off and when the new shielding technology was applied without shutting down the CCTV. As a result of the study, it was found that there was at least one group with significant differences. Type I and type III belonged to group 1 while type II belonged to group 2 in the Post-hoc analysis, which meant blocking power of the CCTV and the applying new shielding technology were in the same group. In conclusion, if electromagnetic waves are generated due to additional accessories in the scanning room, the shielding material proposed in this study should be applied which enables the electric state become similar to type I, not generating noise, thereby preventing the artifacts caused by electromagnetic waves.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.73-79
• /
• 2002

In this paper, electromagnetic waves radiated from discharge at three-type electrodes(needle-plane, plane-plane and sphere-plane electrode) using AC power source in air are measured and the peculiar patterns of their spectra are reported. The radiated electromagnetic waves were measured in bandwidth of VHF(30-230[MHz]) using a biconical antenna and a spectrum analyzer. When the discharge onset voltage range, high electric field intensity is shown in frequency band of 45, 70, 80[MHz] in case of needle-plane electrode configuration and 40[MHz] in case of plane-plane and sphere-plane electrodes configuration. However, when the breakdown voltage range, the frequency spectrum distribution of radiated electromagnetic waves appear different in the whole frequency range according to the shapes of electrode.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.81-87
• /
• 2003

This paper simulated discharge progress and partial discharge using needle-plan electrode system in air, in this time with discharge progress, studied the distribution of frequency spectrum of the radiated electromagnetic waves using biconical antenna and spectrum analyzer. From results of this study, a method was introduced for measurement and analyzation of the radiated electromagnetic waves in accordance with AC discharge progress in air, Besides, according to the consideration of the mutual relation between frequency spectrum of the radiated electromagnetic waves and discharge progress, it was confirmed that detecting partial discharge and estimating discharge progress were possible.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.87-93
• /
• 2002

The previous RST postulates that the scattering field, within each modal partial wave, comprise of the resonance and the background components. The new RST is recently developed by the product expansion of the scattering functions in the field of acoustics. The new formulation suggests that the scattering coefficients consist of resonance, non-resonance, and their interactional portions. In the scattering problems of acoustic waves, the moduli and phase of the resonance coefficient are obtained correctly by the new RST. In our recent works the new RST was successfully applied to the scattering problem of electromagnetic waves for coated conducting cylinder and sphere. In this paper, the new RST is extended to the 2-dimensional scattering problem of electromagnetic waves for a homogeneous dielectric cylinder, and the numerical results are compared with the previous RST.

• Horticultural Science & Technology
• /
• v.17 no.6
• /
• pp.773-776
• /
• 1999

Effects of cacti and a few indoor plants on the protection of the harmful electromagnetic waves (ELF: extremely low frequency and VLF: very low frequency bands) radiated from the monitor of computer were investigated in indoor condition. The front screen of monitor evoked the highest amounts of electromagnetic waves as compared to other positions. Therefore, plants and other objects were placed on the front or side of monitor in order to measure electromagnetic waves. It was shown that all plants including cacti did not have any effect on the reduction of magnetic waves in both ELF and VLF, regardless of species and varieties, sizes, and dispositions. In the case of electric waves, however, there was a little reduction by cacti, depending upon several treatments mentioned before, but the measured values did not reach below values ruled by TCO (Tjatemannens Central Organization, Swedish Confederation of Professional Employees; electric field: 10 V/m and 1 V/m in ELF and VLF, respectively).

• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.26-35
• /
• 2019

Modern imaging technologies utilizing electromagnetic waves are indispensable in our daily lives. Applications, such as television and smartphone screens, radar imaging for weather forecast, and medical imaging, can be attributed to technology developments in various electromagnetic regions. Terahertz (THz) waves, electromagnetic (EM) waves located between far infrared and microwave regions, had left unexplored EM waves. Recent advances in technology have led to various two-dimensional and three-dimensional THz imaging techniques. In this article, we explain THz imaging techniques as well as the experimental results from our laboratory. Additionally, we introduce commercial THz cameras developed worldwide. Finally, we present the applications of THz imaging techniques.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.385-388
• /
• 2019

Considering spherically symmetric spacetimes embedded in a 5-dimensional static Lorentzian manifold, within the large distance limit of DGP model, we study null geodesic equations. We discuss possible relations of particles following the geodesics with the gravitational waves detected recently, in comparison with the electromagnetic waves propagaing in these brane spacetimes.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.105-108
• /
• 2002

Materials, matrices mixed with various kinds of conductive or magnetic powder, such as ferrite, have been used as the electromagnetic wave absorbing ones, so called RAM(radar absorbing material). The structure that does not only have electromagnetic waves absorbing property like RAM but also supports loads is called RAS(radar absorbing structure). One of the existing manufacturing process of RAS is to compound with conductive powders the glass fiber-reinforced composite with good permeability and the ability to support loads. The process, however, causes a number of problems, such as the degradation in the mechanical properties of the composite, especially, interlamina shear strength. In this study, mechanical properties of glass fabric/epoxy composite containing 7wt% carbon black powders were measured and compared with pure glass fabric/epoxy composites.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.621-629
• /
• 1998

Propagation characteristics of electromagnetic waves in lossy tunnels are analysed using Finite Element Method with edge basis function. According to the analysis lossy dielectric wall on the tunnel highly affects the characteristics of the waves in the tunnel. Also higer modes are separated using mode orthogonality principle, and the propagation characteristics of higer modes are investigated. To verity the numerical results, miniatures of the tunnels are constructed and measurements of the waves are accomplished.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1512-1513
• /
• 2007

In this paper the influence of CMOS- and TTL-technology on the breakdown and destruction effects by artificial electromagnetic waves is determined. Different electronic devices(3 CMOS & 5 TTL) were exposed to high amplitude electromagnetic waves. CMOS ICs were occurred only destruction below the max electric field and TTL ICs were occurred breakdown and destruction below the max electric field. The SEM analysis of the destruction devices showed onchipwire and bondwire destruction like melting due to thermal effect. The test results are applied to the data which understand electromagnetic wave effects of electronic equipments.