• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.217-224
• /
• 2021

In this study, Monte Carlo (MC) simulation is conducted with recurrence relation to study the effect of SiO₂ with different particle size and their roles in enhancing the ionic conductivity and lithium transference number of PMMA composite polymer electrolytes (CPEs). The MC simulated ionic conductivity is verified with the measurements from Electrochemical Impedance Spectroscopy (EIS). Then, the lithium transference number of CPEs is calculated using recurrence relation with the MC simulated current density and the reference transference number obtained. Incorporation of micron-size SiO₂ (≤10 ㎛) fillers into the mixture improves the ionic conductivity from 8.60×10^-5 S/cm to 2.35×10^-4 S/cm. The improvement is also observed on the lithium transference number, where it increases from 0.088 to 0.3757. Furthermore, the addition of nano-sized SiO₂ (≤12 nm) fillers further increases the ionic conductivity up towards 3.79×10^-4 S/cm and lithium transference number of 0.4105. The large effective surface area of SiO₂ fillers is responsible for the improvement in ionic conductivity and the transference number in PMMA composite polymer electrolytes.

• 공업화학
• /
• 제10권6호
• /
• pp.822-827
• /
• 1999

본 연구에서는 에너지 밀도가 큰 초고용량 캐패시터를 제작하기 위한 기초 연구로서 활성탄소섬유의 물성과 유기 전해질의 특성이 초고용량 캐패시터의 전기화학적 특성에 미치는 영향을 조사하였다. 유기성 전해질의 경우는 이온의 크기가 수용성 전해질 보다 훨씬 크기 때문에 탄소전극의 세공크기에 많은 영향을 받으며, 용량을 발현할 수 있는 유효세공의 크기가 커야 한다는 것을 알 수 있었다. 혼합용매를 이용한 전해액의 조성은 큰 비축전용량과 빠른 충전속도, 그리고 낮은 ESR 및 방전전류의 세기에 대한 높은 비축전용량 유지성 등의 우수한 충방전 특성을 나타내는 것을 알 수 있었고, 전해질의 높은 이온전도도가 용량발현 및 자가방전 특성에 큰기여를 하고 있으며, 전해질 이온의 크기는 충전속도에 많은 영향을 미치는 것을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.465-465
• /
• 2011

In recent years, electrochemical supercapacitors have attracted much attention due to their high power density, long life cycles, and high efficiency. Some supercapacitors using CNTs have been reported, but there are several issues to be resolved for further development of CNT based supercapacitors. One issue is time consuming procedures to prepare CNT films, which may provide poor control of CNT uniformity over the large area of the substrates. Another is new electrolytes replacing the conventional liquid electrolytes in supercapacitors. In this work, We have successfully demonstrated that spray deposition method of multiwalled CNT films using gel electroytes could be promising for CNT-based supercapacitors on ITO substrates. Specific capacitances using gel electrolyte reached up to 1.5 F/g and 9 mF/$cm^2$, and internal resistance was 28 ${\Omega}$. Specific capacitances and internal resistance of supercapacitors with gel electrolyte were better than or comparable to those with liquid electrolytes($KNO_3$, $Na_2SO_4$), indicating that gel electrolytes could replace liquid counterparts in CNT-based supercapacitors. Combined with gel electrolyte, spray deposition method could provide low cost and easily scalable process for high performance supercapacitors using CNT films on ITO for applications in display devices.

• 공업화학
• /
• 제10권6호
• /
• pp.814-821
• /
• 1999

고비표면적의 활성탄소섬유(ACF: activated carbon fiber)를 분극성 전극으로 이용한 전기이중층 캐패시터(electric double layer capacitor)의 단위 cell test를 통하여, ACF의 비표면적, 세공의 크기 및 전기전도도가 캐패시터의 비축전용량에 커다란 영향을 미치고 있음을 확인할 수 있었고, 전해질은 $H^+$ 이온을 함유한 $H_2SO_4$이 가장 좋은 축전용량을 나타내었으나, 집전체 부식 등의 문제로 인하여, 실용화에 있어서는 우수한 충방전 거동을 나타낸 KOH계 전해질이 적당한 것으로 확인되었다. 분극성 전극으로 사용되는 ACF를 탄화 또는 후활성화 등이 후처리를 통하여 비축전용량을 급격히 증가시킬수 있었고, 3만회까지의 연속 충방전 실험에서 전기이중층 캐패시터는 2차전지에서는 찾아 볼 수 없는 매우 높은 충방전 효율과 긴 사용수명을 가지는 것을 확인할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.231-234
• /
• 2007

The solid state dye-sensitized saolrc cells (DSSCs) employing polymer electrolytes show high overall energy conversion efficiency as high as 4.5% at 1 sun conditions. The improved efficiency may be primarily due to the enlarged interfacial contact area between the electrolyte and dyes in addition to the increased ionic conductivity, which were done by utilizing liquid oligomers, followed by in situ self-solidification, to form the solid DSSCs "Oligomer Approach". The effect of the charge transfer resistance at the counter electrode side on the effciency has also been investigated.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.63-64
• /
• 2006

The solid state dye-sensitized solar cells (DSSCs) employing polymer electrolytes show high overall energy conversion efficiency as high as 4.5 % at 1 sun conditions. The improved efficiency may be primarily due to the enlarged interfacial contact area between the electrolyte and dyes in addition to the increased ionic conductivity, which were done by utilizing liquid oligomers, followed by in situ self-solidification, to form the solid DSSCs: "Oligomer Approach". The effect of the charge transfer resistance at the counter electrode side on the efficiency has also been investigated.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.404-411
• /
• 2012

The reliability of solid oxide fuel cells (SOFCs) particularly depends on the high quality of solid oxide electrolytes. The application of thinner electrolytes and multi electrolyte layers requires a more reliable characterization method. Most of the investigations on thin film solid electrolytes have been made for the parallel transport along the interface, which is not however directly related to the fuel cell performance of those electrolytes. In this work an array of ion-blocking metallic Ti/Au microelectrodes with about a $160{\mu}m$ diameter was applied on top of an ultrathin ($1{\mu}m$) yttria-stabilized-zirconia/gadolinium-doped-ceria (YSZ/GDC) heterolayer solid electrolyte in a micro-SOFC prepared by PLD as well as an 8-${\mu}m$ thick YSZ layer by screen printing, to study the transport characteristics in the perpendicular direction relevant for fuel cell operation. While the capacitance variation in the electrode area supported the working principle of the measurement technique, other local variations could be related to the quality of the electrolyte layers and deposited electrode points. While the small electrode size and low temperature measurements increaseed the electrolyte resistances enough for the reliable estimation, the impedance spectra appeared to consist of only a large electrode polarization. Modulus representation distinguished two high frequency responses with resistance magnitude differing by orders of magnitude, which can be ascribed to the gadolinium-doped ceria buffer electrolyte layer with a 200 nm thickness and yttria-stabilized zirconia layer of about $1{\mu}m$. The major impedance response was attributed to the resistance due to electron hole conduction in GDC due to the ion-blocking top electrodes with activation energy of 0.7 eV. The respective conductivity values were obtained by model analysis using empirical Havriliak-Negami elements and by temperature adjustments with respect to the conductivity of the YSZ layers.

• Journal of Nutrition and Health
• /
• 제8권3호
• /
• pp.9-17
• /
• 1975

The purpose of this survey was to study the nutritional status for over 40 years old, related to the dietary pattern of fishing area. The nutrition survey was conducted in a fishing area located in Chilpo-dong, Euchang-myon, Youngil-gun, Kyungbuk province. The precise weighing method was used in evaluating the foods intake for 40 households during a 7 days period. Physical examination, detailed biochemical test on both blood and urine and stool tests were performed by physians on 45 persons over 40 years old man. The result obtained are summarized as follows: (1) Average nutrients intake of an adult per day: calorie intake was 2,883 Cal and its components-Protein (76.3 g) was 10.6%, fat (13.7 g) was 4.2% and carbohydrate (521 g) contributed 85.2% of the total calories. Other nutrients were higher than any other survey data. (2) To evaluate the nutritional deficiencies, clinical examinations were conducted. Hepatomegaly was present 25.3% of these examiners. (3) By stool test most of the examiners were infested in ascareis and infestation rate of stool was 87.5%. (4) The following chemical components of blood serum were analyzed and found to be within the normal range: glucose, blood urea nitrogen, uric acid, total cholesterol, inorganic phosphate, alkaline phosphatase, and electrolytes. (5) Content of electrolytes, glucose, pH, specific gravity in urine were normal range.

• Journal of Nutrition and Health
• /
• 제35권5호
• /
• pp.512-523
• /
• 2002

The objective of this study was to investigate the nutritional status, biochemical parameters, lipid and electrolytes concentrations of the enteral nutrition patients according to the duration of enteral nutrition. Eighteen neurosurgery patients in the intensive care unit (ICU) at K University Hospital were subjected in this study. The duration of enteral nutrition was classified into under or over six month of period. Anthropometric, biochemical, clinical, and dietary assessments were performed. Patients' intakes of energy and protein were insufficient, from 82% to 95% of their requirements. Mid-arm muscle circumference (MAMC) and mid-am muscle area (MAMA) were significantly lower in patients over six months of enteral nutrition than those in patients under six months. The subjects were malnourished as indicated by nutrition-related parameters such as hemoglobin, albumin, total lymphocyte count (TLC), tricep skinfold thickness (TSF), mid-arm circumference (MAC), MAMC, and MAMA. Serum chloride level of the patients eve, six months of enteral nutrition was lower (94.7 $\pm$ 3.4 mmo1/1) significantly as compared to that of patients (99.3 $\pm$ 3.5 mmol/ 1) under six months. Urinary sodium and chloride levels were lower in the longer time of enteral nutrition patients than those of shorter period of enteral nutrition patients (p < .05). While serum phospholipid level was higher in the patients over six months of enteral nutrition, other blood biochemical parameters and electrolyte concentrations did not show any differences with the duration of enteral nutrition. Neurosurgery patients in the ICU undergoing long-term enteral nutrition tube-feeding were malnourished and had a variety of metabolic complications. The duration of enteral nutrition could affect the patients' nutritional status, biochemical parameters, and electrolytes balance. The patients who require nutritional support over an extended time need the continuous follow-up care and monitoring by the nutrition support team for laboratory, clinical, and nutritional assessments.

• Journal of Electrochemical Science and Technology
• /
• 제15권2호
• /
• pp.299-313
• /
• 2024

Electrochemical machining (ECM) is an effective manufacturing method for difficult-to-machine materials and is widely used in the precision manufacturing of aerospace components. In recent years, the requirements for the machining accuracy and surface integrity of ECM have become increasingly stringent. To further improve the machining quality, this work investigated the intricate laws between electrolyte filtration accuracy and machining quality. Electrolytes with different filtration accuracies were compared, and a numerical simulation was used to evaluate the change in temperature and bubble rate of the flow field in the machining area. Experiments were conducted on ECM of Ti-6Al-4V (TC4) alloy workpieces using electrolytes with different filtration accuracy. The workpiece machining accuracy and surface quality were analyzed, and the repetition accuracy of the workpiece was evaluated. The intricate laws between electrolyte filtration accuracy and machining quality were explored. It was found that when the electrolyte filtration accuracy is improved, so too is the machining quality of the ECM. However, once the filtration accuracy has reached a certain value, the machining quality has extremely limited improvement. By evaluating the repetition accuracy of processed workpieces in electrolytes with different filtration accuracies, it was found that when the filtration accuracy reaches a certain value, there is no positive correlation between the repetition accuracy and filtration accuracy. The result shows that, for the workpiece material and conditions considered in this paper, an electrolyte with 0.5㎛ filtration accuracy is suitable for the wide application of precision ECM.