• Journal of Korean Neurosurgical Society
• /
• 제46권2호
• /
• pp.165-167
• /
• 2009

Pain caused by chronic pancreatitis is medically intractable and resistant to conventional interventional or surgical treatment. We report a case of spinal cord stimulation (SCS) for intractable pain due to chronic pancreatitis. The patient had a history of nonalcoholic chronic pancreatitis and multiple emergency room visits as well as repeated hospitalization including multiple nerve block and morphine injection for 3 years. We implanted surgical lead at T6-8 level on this patient after successful trial of percutaneous electrode. The patient experienced a decreased visual analog scale (VAS) scores for pain intensity and amount of opioid intake. The patient was followed for more than 14 months with good outcome and no further hospitalization. From our clinical case, spinal cord stimulation on intractable pain due to chronic pancreatitis revealed moderate pain control outcome. We suggest that SCS is an effective, noninvasive treatment option for abdominal visceral pain. Further studies and long term follow-up are needed to fully understand the effect of SCS on abdominal visceral pain.

• 한국응용과학기술학회지
• /
• 제29권4호
• /
• pp.653-658
• /
• 2012

고농도 유기질 폐수처리를 위해 전기화학적 방법의 사용에 있어 관심이 고조되고 있다. 전기화학적 방법의 기술은 음식물폐수 및 공업적 폐수 문제를 해결하는데 이상적 처리 방법이다. 다른 화학적 처리 방법과는 다르게 전기화학적 처리장치는 2차 폐수의 부피를 증가시키지 않고 용수와 유기질 비료로 재활용한다. 전기화학적 방법은 전해부상장치를 무기화학적 약품과 병행하여 더욱 효과적으로 음식물 폐수를 처리한다. 이 연구는 2차 처리로 초음파와 오존처리로 탈색, COD와 BOD가 격감함으로 용수 및 유기질 비료로 활용하도록 실험하였다.

• 센서학회지
• /
• 제9권4호
• /
• pp.327-333
• /
• 2000

중심주파수가 340MHz이고 $1.435{\mu}m$의 IDT 전극 폭과 간격을 가진 양방향 전송형 SAW필터를 LN $128^{\circ}$ Y-X 웨이퍼의 압전기판으로 제작하였다. 전력 내구성을 개선시키기 위한 방안으로 Al에 비해 밀도가 크고, 열팽창계수가 작으며 접착력이 좋은 Ti를 압전체기판과 전극물질인 Al 사이에 증착시켰다. Ti의 두께 및 열처리 온도가 내전력 특성에 미치는 영향을 분석하였는데, Ti층이 두꺼울수록 내전력이 개선되었으며, 특히 $300^{\circ}C$에서 열처리하였을 때 가장 우수하였다.

• 열처리공학회지
• /
• 제14권5호
• /
• pp.292-296
• /
• 2001

In this work, an ultra-high vacuum activated reactive evaporation equipment was built. With reaction of Al and oxygen plasma, $Al_2O_3$ was deposited on the surface of etched Al foil. The chamber was evacuated down to $2{\times}10^{-7}$ torr initially. The Ar and $O_2$ gas introduced into the chamber to maintain $5{\times}10^{-5}$ torr during deposition. Ar gas prevents recombining of the ionized oxygen. Evaporation was maintained by electron beam evaporator continuously. Heating filament and electrode were used in order to generate plasma. The substrate bias of -300V was introduced to accelerate deposition of evaporated Al atoms. The composition and morphology of deposited $Al_2O_3$ films were analyzed by x-ray photoelectron spectroscopy(XPS) and atomic force microscopy (AFM), respectively. The Al oxide was formed on the surface of etched Al foil. According to AFM results, the surface morphology of $Al_2O_3$ film indicates uniform feature. Dielectric characteristic was measured as a function of frequency. Measured withstanding voltage and capacitance were 52V and $24{\mu}F/cm^2$, respectively. The obtained $Al_2O_3$ film shows clean condition without contaminants, which could be adapted to capacitor production.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.121-121
• /
• 2011

Graphene formed by chemical vapor deposition was exposed to the various plasmas of Ar, O2, N2, and H2 to examine its effects on the bonding properties of graphene to metal. Upon the Ar plasma exposure of patterned graphene, the subsequently deposited metal electrodes remained intact, enabling successful fabrication of field effect transistor (FET) arrays. The effects of enhancing adhesion between graphene and metals were more evident from O2 plasmas than Ar, N2, and H2 plasmas, suggesting that chemical reaction of O radicals induces hydrophilic property of graphene more effectively than chemical reaction of H and N radicals and physical bombardment of Ar ions. From the electrical measurements (drain current vs. gate voltage) of field effect transistors before and after Ar plasma exposure, it was confirmed that the plasma treatment is very effective in controlling bonding properties of graphene to metals accurately without requiring buffer layers.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.190-196
• /
• 2002

Ni/MH 박막전지의 전극으로 사용될 수 $Mg_{2}Ni$박막을 스퍼터링방법으로 제조하였다. $Mg_{2}Ni$합금박막은 Mg, Ni타?을 이용하여 동시에 스퍼터링함으로서 제조하였다. KOH 액체전해질 및 $Ni(OH)_2$전극을 이용하여 전기화학실험을 하였다. $Mg_2Ni$ 박막의 초기 싸이클 특성에 미치는 열처리 효과를 조사하기 위하여, $200-550^{\circ}C$로 변화시키면서 진공중에서 열처리를 하였다. 열처리온도가 $300^{\circ}C$ 이하에서는 초기방전용량이 증가하였으며, $400^{\circ}C$ 열처리시에는 활성화시의 방전용량이 약 160mAh/g으로 가장 크게 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제27권3호
• /
• pp.306-310
• /
• 2016

In Na-base Battery for ESS, ${\alpha}-Al_2O_3$ and metal bonding was used to prevent direct reaction between electrolyte and electrode. The hard metal was metalized at $1600^{\circ}C$ in a flowing hydrogen gas for high bonding strength. In this study, instead of hard metal metalizing, Ni was plated on ${\alpha}-Al_2O_3$ by electroless Ni plating technique and then bonded with metal. To enhance the bonding strength, surface of ${\alpha}-Al_2O_3$ was treated with $H_3PO_4$. The effects of strength and leakage of joining as a function of acid treatment time on ${\alpha}-Al_2O_3$ are described.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.502-507
• /
• 2007

The oxidation treatment of several carbon materials with a sodium chlorate and 70 wt.% of nitric acid, combined with heat treatment, were attempted to achieve an electrochemical active material with a larger capacitance. Among pitch, needle coke, calcinated needle coke and natural graphite, the structure of needle coke and calacinated needle coke were changed to the graphite oxide structure with the expansion of the inter-layer. On the other hand, the calcinated needle coke after oxidation and heating at $200^{\circ}C$ has exhibited largest capacitance per weight and volume of 29.5 F/g and 24.5 F/ml at the two-electrode system in the potential range of 0 to 2.5 V. The electrochemical performance of the calcinated needle coke was discussed with the phenomenon of the electric field activation and the formation of new pores between the expanded inter-layer at first charge.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.43-43
• /
• 2010

We have characterized the parametric and functional properties of live cell and cancer cell according to plasma treatment conditions using Atmospheric Pressure (AP) Plasma with uniquely designed low temperature arc-free unit. AP plasma system showed very highly efficient capabilities of reacting and interfacing directly with live and cancer cells. The parametric results with the types of gases, applied power, applied gap, and process times on cells will be presented in accordance with functional studies of the works. The growth of cancer cells is directly influenced by AP plasma exposure with evaluating plasma conditions in several human cancer cells and understanding how plasma exposure alters molecular signaling pathways. The cells exhibit a slower or faster growth rates compared with untreated cells, depending on the cell types. These results strongly support the conclusion that alterations in one or more of each gene are responsible, at least in part, for plasma-induced apoptosis in cancer cells. In addition, it also will be presented that AP plasma has an important role for the improvement of sensor performance due to excellent interface property between enzyme and metal electrode for bio sensor manufacturing process.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.155-160
• /
• 2005

Gravity thickening process has been widely used in WTP sludge thickening at domestic water treatment plant. The operation method of the process is very simple, however, the process requires long detention time about 24~48 hours for sludge thickening, uses polymer, and low total solids of thickened sludge to increase sludge thickening efficiency. To solve there problems, we studied about flotation process, especially, electro-flotation (EF) process in WTP sludge thickening. Electro-flotation process is simpler than dissolved-air-flotation(DAF) process because EF needs only electrode and current to generate micro-bubbles and the operation is easy. This study was performed at two batch columns to compare interface height, total solids, effluent turbidity between an electro-flotation thickening and a gravity thickening. According to the result, an electro-flotation thickening was that interface height was decreasing, total solids had high concentration, and effluent turbidity was low in comparison with a gravity thickening. Also, it will make the high efficiency of following process, such as a dehydrating process and digestive process. because of high total solids and low moisture content in the sludge.