• Corrosion Science and Technology
• /
• 제8권2호
• /
• pp.45-52
• /
• 2009

The corrosive behavior of mild steel in 0.05 M to 10 M $H_2SO_4$ solutions containing different concentrations of tetrahydropyrimidine derivatives (THPM) was investigated using weight loss method, gasometric technique, electrochemical studies which include AC - impedance and potentiodynamic polarization method, atomic absorption studies and synergistic effect. The results obtained reveal that THPM derivatives is an efficient mixed type inhibitor but slightly anodic and it is more effective in reducing corrosion of mild steel in $H_2SO_4$ media. The adsorption of the inhibitor on the mild steel surface obeys the Langmuir adsorption isotherm. The thermodynamic parameters of adsorption reveal a strong interaction and spontaneous adsorption of THPM on the mild steel surface. The influence of temperature and inhibitor concentration on the corrosion of mild steel has also been investigated.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1182-1186
• /
• 2010

A novel poly(safranine)-modified electrode has been constructed for the determination of 4-nitrophenol (4-NP) in natural water sample. The electrochemical behavior of poly(safranine) film electrode and its electrocatalytic activity toward 4-NP were studied in detail by cyclic voltammetry (CV) and adsorptive linear stripping voltammetry (LSV). All experimental parameters were optimized and LSV was proposed for its determination. In optimal working conditions, the reduction current of 4-NP at this poly(safranine)-modified electrode exhibited a good linear relationship with 4-NP concentration in the range of $8.0{\times}10^{-8}$ to $4.0{\times}10^{-5}mol\;L^{-1}$. The detection limit was $3.0{\times}10^{-8}mol\;L^{-1}$. The high sensitivity and selectivity of the sensor were demonstrated by its practical application for the determination of trace amounts of 4-NP in natural water and fruit samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.240-243
• /
• 1995

The basic electrochemical and photochemical behavior of ultrathin mono- and hetero-type LB film of amphiphilic Ru bipyridine complex adsorbed on ITO electrode by the Langmuir- Blodgett(LB) method as monolayer and alternating multilayer state. With theoretical equation of cyclic voltammetry for redox species, the cyclic voltammogram were simulated successfully taking account the interaction parameters. We could fit almost all measured voltammograms with k$^{\circ}$=72s$\^$-1/, ${\alpha}$$\sub$a/=0.44, ${\alpha}$$\sub$c/=0.54, $\Gamma$$\sub$T/=1.4${\times}$10$\^$-10/, k=0.015s$\^$-1/ values. The AFM images of mono and hetero type LB film surfaces on ITO were also studied.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.918-921
• /
• 2000

Micro-machining, one of the non-traditional machining techniques, can achieve a wanted shape of the surface using metal dissolution with electrochemical reaction and can be applied to the metal such as high tension, heat resistance and hardened steel. The workpiece dissolves when it is positioned close to the tool electrode in electrolyte and the current is applied. Traditional machining has been used in the industries such as cutting, deburring, drilling and shaping. The aim of this work is to develop Micro-machining techniques for micro shape by establishing appropriate machining parameters of micro-machining

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.806-813
• /
• 1999

The effect of Post-Weld Heat Treatment(PWHT) of SS400 Steel was investigated with parameters such as micro vickers hardness corrosion potential polarization behaviors galvanic current Al anode generating current Al anode weight loss etc. Hardness of each parts(HAZ, BM, WM)by PWHT is lower than that of each parts by Non Post-Weld Heat Treatment(NPWHT) However hardness of WM of HAZ part was the highest among those three parts and HAZ area were also acted as cathode without any case of heat treatment. Potential difference between each three parts by PWHT was also smaller compared to NPWHT. Therefore it is suggested that Corrosion resistance property is increased by PWHT. However both Al anode generating current and anode weight loss was also decreased by PWHT compared to NPWHT when SS400 steel is cathodically protected by Al anode.

• Membrane and Water Treatment
• /
• 제5권4호
• /
• pp.251-263
• /
• 2014

The study contributes in the treatment of waste generated by the textile complex cotton of Draa Ben Khedda, Algeria. The azo dye "Direct Red Solophenyle 4GE" represents the base particle of the discharges and electrocoagulation with nanofiltration are used as a means of treatment. The solar photovoltaic is suitable for electrochemical process to reduce the energy cost. Several study parameters are considered in this work. The electrocoagulation batch gives the best reduction 37% for a dye concentration of 7.21 mg/L ($[NaCl]_{added}$=1g/L; $j=25.2mA/cm^2$). Coupling methods (electrocoagulation-nonofiltration) gives a complete discoloration rejecting concentration 52.4 mg/L (pHi = 7.6, $[NaCl]_{added}$=3g/L, $j=2.13mA/cm^2$). The result shows the coupling efficiency with a reduced amount of resulting slurry at the end of treatment.

• 센서학회지
• /
• 제17권1호
• /
• pp.29-34
• /
• 2008

A new disposable amperometric tri-enzyme biosensor for the detection of paracetamol has been developed. The paracetamol sensors developed uses horseradish peroxidase modified screen-printed carbon electrodes (HRP-SPCEs) coupled with immobilized enzymes, tyrosinase and aryl acylamidase, prepared using a poly (vinyl alcohol) bearing styrylpyridinium groups (PVA-SbQ) matrix. Optimization of the experimental parameters has been performed and the paracetamol biosensor showed detection limit for paracetamol is as low as $100{\mu}M$ and the sensitivity of the sensor is $1.46nA{\mu}M^{-1}cm^{-2}$.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1910-1918
• /
• 2005

Characterizing electrochemical polymerization of polypyrrole film on a substrate depends on many parameters. Among them, potential difference and cumulative charges play important role. The level of potential difference affects the quality of the polypyrrole. On the contrary, cumulative charge affects the thickness of the polypyrrole. The substrate surface is adjusted physically and chemically by treating with sandblasting and the addition of thiol for surface adhesion improvement. Experimental results show that the sandblasted and thiol treated substrate provides better. adhesion than non-sandblasted and non-thiol treated substrate.

• 한국응용과학기술학회지
• /
• 제30권1호
• /
• pp.139-145
• /
• 2013

The electrochemical analysis of silver ion was performed using cyclic voltammetry (CV) and square-wave (SW) stripping voltammetry, and electrode cell systems were fabricated with graphite pencil electrode (GE) of working, reference and counter electrodes. Also electrolyte was the use of sea water as electrolyte solutions instead of ionic controlled solutions. The optimum analytical conditions for the cyclic and stripping parameters were determined using GE. The results approached the microgram working ranges of SW(ug/L) and CV(ug/L) Ag, and the optimum conditions were applied to frog's tissue and the food samples.

• 한국표면공학회지
• /
• 제28권4호
• /
• pp.199-206
• /
• 1995

A kinetic study on the electrodeposition of Ni-Zn-P ternary alloys onto a steel in chloride solutions was carried out using a rotating disc electrode. The coatings were characterized using SEM/EPMA and A. A. analysis. The results showed that the plating rates of three components were increased with applied potential, disc rotating speed and temperature. The activation energies of Ni, Zn and P of the coatings were 6.1, 5.1 and 8.0 kcal/mole respectively. Therefore, the deposition rates were controlled partly by surface electrochemical reaction and partly by mass transport. As the potential, temperature of bath and rotating speed of cathode disc were raised, the vol. % ratios of Ni and P of coating layer were increased but that of Zn decreased. The effect of coating parameters on the surface morphology was also examined.