• Journal of information and communication convergence engineering
• /
• 제9권4호
• /
• pp.461-465
• /
• 2011

An aluminum doped zinc oxide (AZO) film for front contacts of thin film solar cells, in this work, were deposited by r.f. magnetron sputtering, and then etched in diluted hydrochloric acid solution for different times. Effects of surface texturing on the electro-optical properties of AZO films were investigated. Also, to clarify the light trapping of textured AZO film, amorphous silicon thin film solar cells were fabricated on the textured AZO/glass substrate and the performance of solar cells were studied. After texturing, the spectral haze at the visible range of 400 ~750 nm increased substantially with the etching time, without a change in the resistivity. The conversion efficiency of amorphous Si solar cells with textured AZO film as a front electrode was improved by the increase of short-circuit current density ($J_{sc}$), compared to cell with flat AZO films.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.711-714
• /
• 2002

The Ce, Mn: $LiTaO_3$ crystals were grown by Czochralski method in congruent ${\varphi}$3＂ $LiTaO_3$ single crystal growing conditions. Concentrations of Ce and Mn in melt were respectively 0.1 mole%. As-grown crystals were red, transparent and the grown crystals were tested with oxidation/reduction treatment for clor and other properties. Influence of Ce and Mn dopants on $LiTaO_3$ crystal properties was discussed. And the nonlinear optical properties of the Ce, Mn: $LiTaO_3$ crystal are being studied.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.117-121
• /
• 2010

$SnO_2-(1-x)P_2O_5-xB_2O_3$ glass system were prepared by melt-quenching technique in the compositional series containing 50, 55 and 60 mol% of $SnO_2$. Local structure of the glasses was investigated by Raman and FT-IR measurements. A large glass-forming region was found at the phosphate side of the ternary system with homogeneous glasses containing up to 5~25 mol% of $B_2O_3$. According as content of $B_2O_3$ increases, theraml expansion coefficient of glass decreased but transition temperature and softening temperature increased. Because these phenomenon changed local structure of glass. According as content of $B_2O_3$ increases, quantity of bridging oxygen increased. Also, according as content of $SnO_2$ increases, confirmed that quantity of non-bridging oxygen increases.

• 한국세라믹학회지
• /
• 제49권2호
• /
• pp.191-196
• /
• 2012

In this study, tin phosphate glass system($SnO_2-(1-x)P_2O_5-xB_2O_3$) that occur during the melting of the metal oxide inhibition of the oxidation reaction, and to reduce oxides of high melting temperature in the following three methods were melting. The first is the general way in the atmosphere, and the second by injecting $N_2$ gas under a neutral atmosphere, and finally in the air were melted by the addition of a reducing agent Melt in the atmosphere when the oxidation of the metal oxide is inhibited by low temperatures were melting. In addition, the deposition of crystals within glassy or inhibit devitrification phenomenon is also improved over 80% transmittance. This phenomenon, when the melting of glass, many of $Sn^{4+}$ ions are reduced to the $Sn^{2+}$ was forming oxides SnO, because it acts as a modifier oxide.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.634-638
• /
• 2018

안개는 전자광학센서를 활용한 탐지, 추적, 인식 등의 다양한 영상처리 알고리즘 성능을 저하시키는 요인이다. 실외 환경에서 사용되는 전자광학센서 기반 무인 시스템의 안정적인 작동을 위해서는 안개를 효과적으로 제거할 수 있는 기술이 필요하다. 단일 전자광학센서의 영상을 이용한 안개 제거 방법으로는 전자광학센서의 통계적 속성을 활용한 dark channel prior가 가장 널리 알려져 있다. 기존의 방법들은 dark channel prior를 활용하여 전달량을 구할 때 정방형 필터를 사용하였다. 정방형 필터 사용 시 필터의 크기가 커질수록 안개 제거의 효과가 작아지며, 필터의 크기가 과도하게 작아질 경우 과포화가 발생하여 영상의 색 정보가 손실된다. 필터의 크기가 알고리즘의 성능에 크게 영향을 끼치기 때문에, 일반적으로는 비교적 큰 크기의 필터를 사용하거나 영상에 따라 과포화가 일어나지 않는 범위에서 작은 크기의 필터를 사용한다. 본 논문에서는 컬러영상분할을 활용한 향상된 안개 제거 방법을 제안하였다. 컬러영상분할의 파라미터를 영상의 정보 복잡도에 따라 자동으로 조정하고, 이를 바탕으로 전달량을 추정하여 과포화 현상은 일어나지 않으며 뛰어난 안개 제거의 성능을 확보하였다.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.29-39
• /
• 1995

The phase separated structure and the electro-optical properties of the (polymer/liquid) crystal : LC) composite film strongly depended on the weight fraction of LC in it. The continuous LC phase was formed in a three-dimensional polymer network when the LC weight fraction was above 40wt%. The aggregation structure of the composite film could be controlled by controlling the solvent evaporation velocity during the film preparation process. The smaller LC domains or channels were formed in the case of the faster solvent evaporation velocity. The composite film exhibited reversible light scattering-light transmission switching upon electric field -OFF and -ON states, respectiverly. The light scattering properties of the composite film strongly depended on the spatial distortion of the nematic directors as well as the mismatch in refractive indices between matrix polymer and LC.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.94-97
• /
• 1991

We have deposited the three kinds of the Langmuir-Blodgett films (Phenylhy drazone, O-stilbazene, N-stilbazene) which have optically nonlinear effect. To study the electro-optic characteristics of these LB films, we performed the differential attenuated total reflection experiment in which the optical properties of the LB films modulated by the electric field(νE = 1KHz). The surface non-linear susceptibilities $\chi$(2) of these LB films obtained, are 1.17$\times$10-10 (m/V), 36.3$\times$10-10 (m/V), and 1.62$\times$10-10 (m/V) for Phenylhydrazone, O-stilbazene, and N-stilbazene, respectively.

• 대한전자공학회논문지
• /
• 제12권3호
• /
• pp.13-19
• /
• 1975

CuCl, KDP 결정체를 이용한 지그재그형 진헹파 전기광학적 레이저 변조기에 대해 자세히 해석했다. 변조기와 크기와 대역폭은 변조용 결정체의 광학적 특성및 M/W유전특성에 의해 결정됨을 알수 있다. 더욱 광손실과 M/W손실의 영향, 입사각, 회절등의 영향을 규명했고 최적 설계법을 제시했다. 중요한 결과를 요약하면 다음과 같다. (1) CuCl, KDP로 10(GHz)이상의 대역폭에서 3(watt)이하의 변조전력으로 50%변조를 얻었다. (2) 변조주파수 한계의 상한은 레이저 빔폭에 의한 차단주파수로 인해 제한된다. A detailed analysis has been carried out of a zigzag traveling wave electro-optic laser modulator usin3 CuCl, KDP Crystal. The inclusion of such practical factors as M/W and optical loss results in an optimum design in which modulator dimensions and bandwidth limitation are uniquely determined by optical and M/W dielectic properties of modulating crystal. The main conclusion of the analysis are: (1) CuCl, KDP may be used to produce 50% modulation over bandwidth of 10(GHz) with less than (watt) of modulating power. (2) The upper modulation frequency limit is set by a cutoff frequency which arises from finite width of optical beam.

• Journal of Photoscience
• /
• 제10권2호
• /
• pp.203-208
• /
• 2003

Two coupled molecules were successfully synthesized by condensation of amine-donor-substituted barbituric acid derivativies as nonlinear optical chromophores. A flexible spacer of the alkyl chain with different lengths of carbon chains (5 and 6 carbons) was introduced between two chromophores, which prevented crystallization and aggregation of molecules. Two coupled molecules (B-Cn-B, n=5, 6) had glass-transition temperatures on a second heating around 81 and 76$^{\circ}C$ without melting points, respectively. To explore the linear optical properties, thin-films were prepared and examined by a photometry method using Nd:YVO$_4$ CW laser. Also, microscopic and macroscopic nonlinear optical properties were measured by Hyper-Rayleigh Scattering (HRS) and the Maker Fringes method using Nd:YAG ps pulse laser, respectively. In spite of the moderate hyperpolarizabilities of coupled molecules, the second order NLO coefficient (d$\_$33/) was larger than the conventional Disperse Red 1 doped PMMA polymeric system.

• 센서학회지
• /
• 제7권2호
• /
• pp.97-102
• /
• 1998

PPV(poly(p-phenylenevinylene))를 발광체로 이용한 유기 박막 EL 소자를 다양한 구조와 조건으로 제작하였으며, 그 전기-광학적 특성을 평가하였다. 제작된 EL 소자는 단층구조(ITO(indium tin oxide)PPV/Mg), 이층구조 (ITO/PVK(poly(N-vinylcarbazole))/PPV)Mg와 ITO/PPV/Polymer matrix+PBD/Mg) 그리고 삼층구조 (ITO/PVK/PPV/PS(polystyrene)+PBD(butyl-2-(4-biphenyl)-5-(4-tert-butylphenyl-1,3,4-oxadiazole))/Mg)를 가지며, 그들의 전기광학적 특성을 상호 비교하였다. 이층구조(ITO/PPV)Polymer matrix+PBD/Mg)에서는 PMMA (poly(methyl methacrylate)), PC(polycarbonate) PS 와 MCH(side chain liquid crystalline homopolymer)를 고분자 메트릭스로 사용하였으며, 특히, PS 고분자 메트 릭스를 전자수송층으로 사용하는 경우에 전자수송제인 PBD의 농도에 따른 발광휘도 특성을 구하였다. 제작된 소자의 인가전압에 따른 전류, 휘도특성을 분석한 결과 터널링효과를 나타내었고 안정된 발광특성을 가진다는 것을 알 수 있었다.