• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.451-452
• /
• 2006

We studied the electro-optical characteristic of vertical alignment liquid crystal display(VA-LCD) on the $SiO_x$ thin film deposited $45^{\circ}$ oblique by rf magnetic sputtering system. LC alignment characteristic showed homeotropic alignment, and pretilt angle was about $90^{\circ}$. A uniform liquid crystal alignment effect on the $SiO_x$ thin film was achieved and the electro-optical characteristic of the $SiO_x$ thin film deposited $45^{\circ}$ oblique by rf magnetic sputtering system was excellent.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.320-323
• /
• 2008

In this paper, electro-optical characteristic of Nematic Liquid crystal (LC) with varying temperature in different LCD modes, namely Fringe Field Switching (FFS), In-plane switching (IPS), and Patterned Vertical Alignment (PVA) modes are investigated and compared. Electro optic me asurements suggest that rate of change of transmission with temperature in FFS mode was lowest and much more thermally stable as compared to IPS and PVA m odes. However the electro-optical characteristic of patterned vertical alignment (PVA) mode was most affected by changing temperature. The measured threshold voltage was found to be much more thermally stable in FFS and IPS modes than that of PVA mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1515-1518
• /
• 2007

We demonstrate a high color gamut liquid crystal display (LCD) system (>100 %) by using a precompensated tri-chromatic LED-backlight module over a temperature range of (25 to $70^{\circ}C$), whose pre-compensated optical characteristic balances the spectral redshift and intensity decrease due to the temperature rising during operation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.679-683
• /
• 2005

In this study, we investigate the characteristic of the poly-Si grain and morphology influenced by XeCl excimer laser system. The stable laser beam source is basic requested; the irradiation beam through optical lens module is more important which limit the grain size smaller than $0.5{\mu}m$. The homogenization lens designs control the poly-Si grain size; so we hardly get enlarge grain size by one laser irradiation scan.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.487-488
• /
• 2005

We have investigated the Electro-Optical Characteristics for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.47-52
• /
• 2012

The use of a $Ti:LiNbO_3$ symmetric Mach-Zehnder interferometric intensity modulator with a push-pull lumped electrode and a plate-type probe antenna to measure an electric field strength is described. The modulator has a small device size of $46{\times}7{\times}1mm$ and operates at a wavelength of $1.3{\mu}m$. The output characteristic of the interferometer shows the modulation depth of 100% and 75%, and $V_{\pi}$ voltage of 6.6 V, and 6.6 V at the 200 Hz and 1 KHz, respectively. The minimum detectable electric field is ~1.84 V/m, ~3.28 V/m, and ~11.6 V/m, corresponding to a dynamic range of about ~22 dB, ~17 dB, and ~6 dB at frequencies of 500 KHz, 1 MHz and 5 MHz, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1364-1366
• /
• 1997

To operate electric power systems economically and stably, and to supply the electric power of good quality, it is necessary that the measured information (current, voltage, and so on) be detected and transmutted with high reliability and high effieincy. For the reason, the optical magnetic field sensor is possible to rapidly detect to over current and recover when electric power line have fault. In addition, the optical sensor have no electro magnetic distortion and no electric insulation. In this study, we designed OCR(Over Current Relay) using optical sensor. The designed OCR using optical sensor was measured characteristic and compared contentional OCR. This system have highest optical advantages and reliability.

• 한국컴퓨터정보학회논문지
• /
• 제10권5호
• /
• pp.123-132
• /
• 2005

본 논문에서는 파장 다중 광 네트워크의 스위치 노드 개선에 관하여 기술한다. 현재 인터넷 트래픽의 급속한 증가로 인해 보다 큰 네트워크 용량이 요구되고 있다. 파장다중 광 네트워크는 고속의 데이터 전송과 데이터 속도와 유형에 대한 투명성 등을 제공하여 주기 때문에 미래의 광 네트워크 구성에 가장 유력한 기술이다. 이러한 광 네트워크에서는 많은 양의 멀터미디어 정보를 전송하고 이에 대한 트래픽을 처리 할 수 있으며 또한 트래픽의 제어가 가능한 노드 구조를 필요로 하고 있다 파장다중 광 네트워크 노드의 스위치는 스위칭을 위한 광 스위치 모듈과 파장 변환을 위한 파장 변환기 모듈로 구 성되고 광 마이크로 전자기계스위치(MEMS: Micro Electro Mechanical Switches)를 이용하여 광/전 또는 전/광 변환 없이 구현한다. 실험에서는 광 MEMS를 이용하여 스위치 노드를 구성하고 광신호의 성능과 스위치 패브릭의 동작 특성에 관한 검증을 통하여 광/전 또는 전/광 변환 없이 완전 광으로 대용량 트래픽을 처리함으로서 기존의 노드를 개선한 새로운 파장다중 광 스위치 노드를 제안한다.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.6-11
• /
• 2009

VA Mode LC를 사용하는 Full-HD급 LCOS 마이크로디스플레이에서 셀 상하 간격의 변화에 따른 전기광학적 특성의 변화에 관하여 3차원 LC code를 이용하여 연구하였다. 5가지의 다른 셀 상하 간격 (1.4 ${\mu}m$, 1.8 ${\mu}m$, 2.1 ${\mu}m$, 2.4 ${\mu}m$ 그리고 2.8 ${\mu}m$)의 변화에 따라 Reflectance-Voltage 특성, 반사광 및 반사율 분포, Optical Fill Factor 그리고 명암비를 비교하였다. Surface Anchoring 효과에 의해 상하 간격이 증가하면서 반사율은 증가하였으나 Optical Fill Factor와 명암비를 고려할 경우, 중간 수준의 간격인 2.1 ${\mu}m$ 의 특성이 가장 우수함을 확인할 수 있었다. 동일한 구조를 갖고 있는 0.7 인치 LCOS 패널을 제작하여 광학적 측정을 해 본 결과 시뮬레이션 결과와 통일함을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.71-75
• /
• 2014

To observe the optical characteristic of oxide semiconductor depending on the degree of bonding structures, SiOC, ZnO and IGZO were prepared by the RF magnetron sputter system and chemical vapor deposition. Generally, crystal ZnO, amorphous SiOC and IGZO changed the optical characteristics in according to the electro-chemical behavior due to the oxygen vacancy at an interface between different groups. Transmittance of SiOC and IGZO with amorphous structures was higher than that of ZnO with crystal structure, because of lowering the carrier concentration due to the recombination of electron and holes carriers as oxygen vacancies. Besides, the energy gap of amorphous SiOC and IGZO was higher than the energy gap of crystal ZnO. The diffusion mobility of holes is higher than the drift mobility of electrons.