• Journal of Magnetics
• /
• 제21권3호
• /
• pp.315-321
• /
• 2016

M-Zn (M = Sb, V, Nb) substituted M-type strontium hexaferrites were prepared by a ceramic method. The phase composition, morphology and magnetic properties were studied by x-ray diffractometry, scanning electron microscopy and vibrating sample magnetometry. Saturation magnetization increases with a substitution up to 75.0 emu/g (2.5 % higher compared to unsubstituted hexaferrite) and then decreases with a further substitution. A coercive field of substituted hexaferrite powders with highest saturation magnetization is more than 3 kOe. Substituted strontium hexaferrite powders prepared in this work are a rare example of high $M_S$ compositions without doping rare-earth elements and would be a promising candidate for a permanent magnet application.

• Structural Engineering and Mechanics
• /
• 제27권5호
• /
• pp.609-623
• /
• 2007

The problem of a semi-infinite magneto-electro-elastically impermeable mode-III crack in a magneto-electro-elastic material is considered under the action of impact loads. For the case when a pair of concentrated anti-plane shear impacts, electric displacement and magnetic induction impacts are exerted symmetrically on the upper and lower surfaces of the crack, the magneto-electro-elastic field ahead of the crack tip is determined in explicit form. The dynamic intensity factors and dynamic energy density factor are obtained. The method adopted is to reduce the mixed initial-boundary value problem, by using the Laplace and Fourier transforms, into three simultaneous dual integral equations, one of which is converted into an Abel's integral equation and the others into a singular integral equation with Cauchy kernel. Based on the obtained fundamental solutions of point impact loads, the solutions of two kinds of different loading cases are evaluated by integration. For some particular cases, the present results reduce to the previous results.

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.223-228
• /
• 1992

This study was conducted to develop an electro-hydraulic three-point hitch control system using an electro-hydraulic servo valve and microcomputer and to investigate the performance of the three-point hitch control system through indoor and field experiments. 1. The results from indoor experiments coincided with those from computer simulation reported in the previous paper. However, the draft control with the value 4 of Kd showed a slight sustained oscillation after it reached the draft set. 2. From the field experiments, it appeared that the RMS errors increased with the ground speed of tractor. In position control, the three-point hitch control system with electro-hydraulic servo valve showed better performance than that with on-off electro-magnetic valve in the ground speed less than 1.6 m/s. In draft control, however, there was no significant differece in performance between those two systems. 3. In depth control, the both types of electro-hydraulic three-point hitch control system showed better performance than the conventional mechanical-hydraulic three-point hitch control system.

• Smart Structures and Systems
• /
• 제26권1호
• /
• pp.77-87
• /
• 2020

By employing a quasi-3D plate formulation, the present research studies static stability of magneto-electro-thermo-elastic functional grading (METE-FG) nano-sized plates. Accordingly, influences of shear deformations as well as thickness stretching have been incorporated. The gradation of piezo-magnetic and elastic properties of the nano-sized plate have been described based on power-law functions. The size-dependent formulation for the nano-sized plate is provided in the context of nonlocal elasticity theory. The governing equations are established with the usage of Hamilton's rule and then analytically solved for diverse magnetic-electric intensities. Obtained findings demonstrate that buckling behavior of considered nanoplate relies on the variation of material exponent, electro-magnetic field, nonlocal coefficient and boundary conditions.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.22-28
• /
• 2009

Recently, there has been an active study about smart fluid to control the vibration, in which MR fluid is evaluated as most efficient because it can generate different bonding forces based on the intensity of the external magnetic fields. This paper attempts to find a mechanism that, under limited conditions during a clutch production that uses such dynamic characteristic, defects the maximum intensity of electromagnetism. Using the finite element analysis program, we predicted a change within the bonding force of the MR fluid occurring inside the clutch when it is subjected to an increased electric current. In addition, we analyzed the change in the magnetic intensity when the coil comprising the coil control center is switched to multiple lines from the standard single line, to find a mechanism that can maximize the effect. Based on this analysis, we developed the clutch and tested its function, hoping to widen future MR fluid's range of application.

• Journal of Acupuncture Research
• /
• 제33권3호
• /
• pp.117-127
• /
• 2016

Objectives : This study was performed to observe the effect of complex therapy, including electro-acupuncture and magnetic-acupuncture, on peripheral facial nerve palsy. Methods : Nine patients with peripheral facial nerve palsy were treated with acupuncture using electrical and magnetic stimulation. Acupoints in the face were stimulated with an electromagnetic field, as widely and as evenly as possible. To evaluate the effects before and after treatment we used Yanagihara's unweighted grading system, House-Brackmann scale, and Sunnybrook facial grading system and image once a week. Results : After treatment, the scores of Yanagihara's unweighted grading system, House-Brackmann scale and Sunnybrook facial grading system each improved (p-value < 0.05). Conclusion : Complex therapy using electro-acupuncture and magnetic-acupuncture might be an effective treatment to improve symptoms of peripheral facial nerve palsy. Further randomized-controlled trials are required to verify the efficacy and results of this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1303-1307
• /
• 2004

MAGLEV is the vehicle which can run in levitated condition by the electro-magnets, and the vehicle can run without any contact condition. In MAGLEV system achieving a high magnetic field for minimum weight is a noteworthy goal. Unfortunately the two aspects of this goal high field and low weight are contradictory. Suitable designs must be sought using optimization techniques. In this paper, magnet attraction force is calculated and conformed by experimental data for designing a electro-magnet.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.439-443
• /
• 2003

MAGLEV is the vehicle which can run in levitated condition by the electro-magnets, and the vehicle can run without any contact condition. In MAGLEV system achieving a high magnetic field for minimum weight is a noteworthy goal. Unfortunately the two aspects of this goal high field and low weight are contradictory. Suitable designs must be sought using optimization techniques. In this paper is a technique for designing a electro-magnet in terms of simple equation.

• Smart Structures and Systems
• /
• 제25권5호
• /
• pp.619-630
• /
• 2020

This paper studies nonlinear free vibration characteristics of nonlocal magneto-electro-elastic (MEE) nanobeams resting on nonlinear elastic substrate having geometrical imperfection by considering piezoelectric reinforcement scheme. The piezoelectric reinforcement can cause an enhanced vibration behavior of smart nanobeams under magnetic field. All of previously reported studies on MEE nanobeams ignore the influences of geometric imperfections which are very substantial due to the reason that a nanobeam cannot be always perfect. Nonlinear governing equations of a smart nanobeam are derived based on classical beam theory and an analytical trend is provided to obtained nonlinear vibration frequency. This research shows that changing the volume fraction of piezoelectric constituent in the material has a great influence on vibration behavior of smart nanobeam under electric and magnetic fields. Also, it can be seen that nonlinear vibration behaviors of smart nanobeam are dependent on the magnitude of exerted electric voltage, magnetic potential, hardening elastic foundation and geometrical imperfection.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.145-153
• /
• 2019

Modified couple stress formulation and first order shear deformation theory are used for magneto-electro-elastic bending analysis of three-layered curved size-dependent beam subjected to mechanical, magnetic and electrical loads. The governing equations are derived using a displacement field including radial and transverse displacements of middle surface and a rotation component. Size dependency is accounted based on modified couple stress theory by employing a small scale parameter. The numerical results are presented to study the influence of small scale parameter, initial electric and magnetic potentials and opening angle on the magneto-electro-elastic bending results of curved micro beam.