• 제목/요약/키워드: Electro-magnetic

검색결과 1,044건 처리시간 0.022초

복분자(Rubus coreanus Miquel) 와인의 에틸아세테이트층으로부터 저분자 페놀성 항산화 화합물의 단리·동정 (Isolation and Identification of Low Molecular Phenolic Antioxidants from Ethylacetate Layer of Korean Black Raspberry (Rubus coreanus Miquel) Wine)

  • 김성자;이형재;박근형;이종욱;임익재;정희종;문제학
    • 한국식품과학회지
    • /
    • 제40권2호
    • /
    • pp.129-134
    • /
    • 2008
  • 복분자 와인은 복분자 열매를 발효ㆍ숙성시켜 제조하기 때문에 그들 양자 간의 성분에는 차이가 있을 것으로 추측되었다. 그러나 복분자 와인의 음용률이 높음에도 불구하고 복분자 와인 중에 함유된 성분들에 관한 체계적인 연구는 거의 전무한 실정이다. 그래서 먼저 복분자 와인 중에 함유되어 있는 성분들의 chemical profile의 검토를 위해 항산화 활성에 초점을 맞추어 화합물의 단리ㆍ구조해석에 착수하였다. 복분자 와인 11 L(신선 복분자 열매 15.7 kg 상당량)의 농축액(928.3 g)을 용매분획한 후 얻어진 EtOAc층(20 g/56.2 g)을 대상으로 각종 column chromatography 및 HPLC를 행하여 5종의 항산화 활성 화합물을 단리하였다. 그들을 대상으로 $^1H$-NMR 분석 및 TMS 유도체화 후 GCMS 분석을 행한 결과, 4-hydroxybenzoic acid(1, 0.1 mg), 3,4-dihydroxybenzoic acid(2, 0.3 mg), 4-(2-hydroxyethyl)-phenol(3, 0.6 mg), pyrocatechol(4, 0.3 mg), 3,4,5-trihydroxybenzoic acid ethyl ester(5, 0.6 mg)로 동정하였다. 화합물 1과 2는 복분자 열매중에 존재함이 보고되어 있으나 화합물 3-5는 복분자 열매로부터 그 존재가 보고되어진 바 없으며, 이들 5종의 화합물 모두가 복분자 와인으로부터 동정되어진 것 또한 처음이다.

OLED Display Module용 DC-DC 변환기 설계 (A DC-DC Converter Design for OLED Display Module)

  • 이태영;박정훈;김정훈;김태훈;카오투안부;김정호;반형진;양권;김형곤;하판봉;김영희
    • 한국정보통신학회논문지
    • /
    • 제12권3호
    • /
    • pp.517-526
    • /
    • 2008
  • 본 논문에서는 자동차 계기판의 OLED 디스플레이 모듈용 One-chip DC-DC 변환기 회로를 제안하였다. 전하 펌핑 방식의 OLED 패널 구동전압 회로는 PWM(Pulse Width Modulation) 방식을 사용한 DC-DC 변환기 회로에 비해 소형화, 저가격 및 낮은 EMI 특성을 갖는다. 그리고 Bulk-potential 바이어싱 회로를 사용하므로 전하 펌핑 시 기생하는 PNP BJT에 의한 전하 손실을 방지하도록 하였고, 밴드갭 기준전압 발생기의 Start-up 회로에서 전류소모를 기존 BGR 회로에 비해 42% 줄였고 VDD의 링 발진기 회로에 로직전원인 VLP를 사용하여 링 발진기기 레이아웃 면적을 줄였다. 또한 OLED 구동전압인 VDD의 구동 전류는 OLED 패널에서 요구하는 40mA 이상이다. $0.25{\mu}m$ High-voltage 공정을 이용하여 테스트 칩을 제작 중에 있으며, 레이아웃 면적은$477{\mu}m{\times}653{\mu}m$이다.

레이더 체계 전원공급용 80 kW급 고효율 영구자석형 발전기 개발 및 성능분석 (Development of Performance Analysis 80 kW High-efficiency Permanent Magnet Generator for Radar System Power Supply)

  • 유지호;조종현;정민길;박성진;강광희
    • 한국군사과학기술학회지
    • /
    • 제22권1호
    • /
    • pp.60-71
    • /
    • 2019
  • Electrical power supply is needed to operate the radar system in the field. In addition, it should not cause performance deterioration under the environmental factors due to characteristics of military equipment, and should not cause malfunction due to electromagnetic waves generated in radar, and then should not cause malfunction in radar equipment. Therefore, By applying a permanent magnet to the rotor of the generator, light weighting and high efficiency of generator were achieved. As a result, electrical performance test of the generator, the rated output power was 80.8 kW, the maximum output power was 88.1 kW, and the output power efficiency was 98.1 % under the full load condition. When the load capacity of the generator was changed from no load to full load, the maximum voltage variation was 3.6 % and the frequency variation was 0.3 %. As a result of the transient response test for measuring the output power of the generator according to the load characteristics change, the maximum voltage variation of 7.9 %, frequency variation of 0.5 % were confirmed, and the transient response time was 2.1 seconds. Environmental tests were conducted in accordance with MIL-STD-810G and MIL-STD-461F to evaluate the operability of the generator groups. Normal operation of radar system generator group was confirmed under high temperature and low temperature environment conditions. Electromagnetic tests were conducted to check if electromagnetic wave generated from both radar system and generator group in operation caused any performance deterioration to each other. As a result, it was confirmed that the performance deterioration due to electromagnetic wave inflow, radiation, and conduction did not occur. It is expected that it should be possible to provide high efficiency power supply and stable power supply by applying to various military system as well as radar system.

MLCC를 이용한 SMPS의 EMI 저감 설계 (Design of EMI Reduction of SMPS Using MLCC Filters)

  • 최병인;좌성훈
    • 마이크로전자및패키징학회지
    • /
    • 제27권4호
    • /
    • pp.97-105
    • /
    • 2020
  • 최근 초고속 이더넷(ethernet)의 데이터 및 동작주파수 속도가 증가하고 있으며, 이에 따라 EMI(electromagnetic interference)가 증가하고 있다. 이러한 EMI의 발생은 주변 전자기기들에 영향을 미쳐 오동작 원인이 될 가능성이 높다. 본 연구에서는 고속 이더넷 스위치 EMI 발생의 주요 원인인 DC-DC SMPS (switching mode power supply)에서 발생하는 EMI 저감을 위해 EMI 필터를 적용하였다. EMI 필터소자는 소형화, 양산화에 장점을 가지며, 내전압(dielectric voltage) 특성이 우수한 MLCC (multi-layer ceramic capacitor)를 사용하였다. MLCC 필터는 X-커패시터 및 X, Y-커패시터로 구성되어 있다. X-커패시터는 10 nF 및 100 nF 용량의 2개의 MLCC와 1개의 마일러 콘덴서(mylar capacitor)로 구성하였다. Y-커패시터는 용량 27 nF의 6개의 MLCC를 사용하여 구성하였다. X-커패시터만을 EMI 필터로 적용한 경우, 전도성(conductive) EMI는 150 kHz ~ 30 MHz의 주파수 대역에서 EMI 전계강도가 허용 한계치를 초과함을 알 수 있었다. 또한 방사성(radiative) EMI도 특정 주파수에서 EMI 전계 강도가 높고, 허용 마진폭도 매우 적음을 알 수 있었다. 반면 X, Y-커패시터를 적용하였을 경우, 전 주파수 대역에서 전도성 EMI가 크게 감소하였으며, 방사선 EMI도 충분한 마진이 확보됨을 알 수 있었다. 또한 X, Y-커패시터의 전기적인 신뢰성을 평가하기 위하여 절연 저항(insulation resistance) 및 내전압 성능을 측정하였으며, 절연 저항 및 내저항 성능이 모두 전기적 신뢰성 기준을 만족함을 알 수 있었다. 결론적으로 MLCC 필터를 X, Y-커패시터로 사용하여 전도성 및 방사성 EMI 노이즈가 효과적으로 감소되었고, 우수한 전기적인 신뢰성도 확보됨을 알 수 있었다.