• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.497-501
• /
• 2020

Dehaze is essential for autonomous driving and intelligent CCTV to operate normally even in foggy weather. The method of airlight estimation is particularly important in dehaze technology. In this paper, we propose a patch-based airlight estimation algorithm and hardware structure that can reduce the amount of unnecessary computation and effectively estimate the airlight in various input images. Proposed algorithm is compared with the popular quad-tree method, and the hardware design is implemented by using XILINX's xc7z045-ffg900 target board as a structure that can satisfy to international standard 4K video in real time.

• Journal of the Korean housing association
• /
• v.27 no.5
• /
• pp.11-23
• /
• 2016

The purpose of this study is to establish the determinants of satisfaction with the results of housing regeneration projects among their elderly residents, and to suggest the political implications. The survey included questionnaires about satisfaction levels with the projects' physical and non-physical maintenance factors. The results were statistically analyzed by correlation analysis and PLS regression analysis. As a result of the study, firstly, the physical factors rather than non-physical factors (such as home improvement and management support, community support, the economic foundations and professional support) were found to have a large effect on elderly residents' satisfaction. Secondly, the non-physical factors, such as economic factors were analyzed among senior job offers that are both highly influential in the two regions Yonnam-dong and Bukgajwa-dong. Finally, electrical maintenance work, tree planting, a "Green" parking plan, or refuse the effect of visually larger landscape improvement, such as bins installed, maintenance of local factors that contribute to the greenery of the area were judged to be important.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.791-794
• /
• 2013

Electronic systems may be cause of various serious failures due to an ionizing radiation effect when exposed to a prompt gamma-ray pulse. This transient electrical malfunction can, in some cases, results in a failure of the electronic system of which the circuits are a part. Transient radiation measurement and evaluation system is required to development for enhanced radiation-resistance against the initial nuclear radiation produced by the detonation of a nuclear weapon of semiconductor devices. In these studies, we performed the following work. In the first part of the work, we carried out a SPICE simulation applied to nuclear radiation condition for PN diode and we also investigated the photocurrent by a pulsed gamma-ray on a PN diode using a TCAD simulation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.61-70
• /
• 2007

This study aims to clarify the effect of forest management practices(thinning and pruning) on soil physical properties and water quality to get the fundamental information on the facility of purifying water quality after forestry practices. Rainfall, throughfall, stemflow, soil and stream water were sampled at the study site which consists of Pinus rigida in Jinju National University Experimental Forest for 4 years from Mar. 1, 2002 to Nov. 30, 2006. Averaged tree height of the management site increased by 1.6m, compared to the value of the non-management site in Pinus rigida. Increment of averaged D. B. H. at the management site showed 4.2cm more in Pinus rigida compared with that at non-management sites. Mesopore ratios (pF2.7) and total porosities of A layer soil at the management site increased more than those at the non-management sites in both stands. Otherwise, soil bulk density resulted in being reversely. Water qualities of throughfall, stemflow and buffered soil water were influenced more positively by the management practice. The average electrical conductivity of stream water was $32.9{\mu}S/cm$ within the range of non-polluted stream water.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.33-36
• /
• 2001

Torque ripple control of brush less DC motor has been the main issue of the servo drive systems in which the speed fluctuation, vibration and acoustic noise should be minimized. Most methods for suppressing the torque ripples require Fourier series analysis and either the iterative or least mean square minimization. In this paper, the novel approach to achieve the ripple-tree torque control with maximum efficiency based on the d-q-0 reference frame is presented. The proposed method optimize the reference phase current waveforms including even the case of 3 phase unbalanced condition, and the motor winding currents are controlled to follow up the optimized current waveforms by delta modulation technique. As a result, the proposed approach provides a simple and clear way to obtain the optimal motor excitation currents. The validity and practical applications of the proposed control scheme are verified through the simulations and experimental results.

• The Korean Journal of Ecology
• /
• v.28 no.6
• /
• pp.383-387
• /
• 2005

In order to clarify the causal of free decline, which observed around the industrial complex, we analyzed pH, electrical conductivity (EC), and cation in rainfall and throughfall cations concentration in the air in tree areas, suburban and rural area. pH of both rainfall and throughfall was lower in the industrial area than the suburban and rural areas. Among the abiotic and biotic factors analyzed in this study, relations between decline degree of Pinus thunbergii and ingredients of rainfall, pH and $Ca^{2+}$ showed negative and positive correlations, respectively.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.341-344
• /
• 2003

This paper proposes a tree-winding transformer protective relaying algorithm based on the ratio of increment of flux linkages (RIFL). The RIFL of the two windings is equal to the turns ratio for all operating conditions except an internal faults. For a single-phase transformer and three-phase transformer containing the wye-connected windings, the increments of flux linkages are calculated. for a three-phase transformer containing the delta-connected windings, the difference of the increments of flux linkages between the two phases are calculated using the line currents, because the winding currents are practically unavailable. Their ratios are compared with the turns ratio. The results of various tests show that the algorithm successfully discriminates internal faults from normal operation conditions such as magnetic inrush, overexcitation and external faults. The algorithm can not only detect internal winding faults, but reduce the operating time of a relay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2409-2416
• /
• 2014

In this paper, an automatic recognition algorithm for linearly modulated signals like PSK, QAM under noncoherent asynchronous condition is proposed. Frequency, phase, and amplitude characteristics of digitally modulated signals are changed periodically. By using this characteristics, cyclic moments and higher order cumulants based features are utilized for the modulation recognition. Hierarchial decision tree method is used for high speed signal processing and totally 4 feature extraction parameters are used for modulation recognition. In the condition where the symbol number is 4,096, the recognition accuracy of the proposed algorithm is more than 95% at SNR 15dB. Also the proposed algorithm is effective to classify the signal which has carrier frequency and phase offset.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.205-206
• /
• 2015

케이블 및 버스바는 전원을 공급하는 부대 장치로 산업 전반에 걸쳐 널리 사용되고 있다. 대부분의 경우 일정 주기로 점검 및 교체 등의 유지 보수를 진행하나 ITER IVC 버스바 및 지중케이블 등의 특수한 경우에서는 접근성 및 작업성의 이유로 유지 보수를 진행 할 수 없다. 이러한 경우, 절연물 내부에 전기 트리가 발생했을 때에는 대책이 없다. 전기 트리는 부분적인 고전계에 의한 진성파괴, 전하의 주입 또는 추출에 의한 파괴 및 전기-기계적 응력(맥스웰 응력)에 의한 파괴, 미소 부분 방전에 의한 파괴의 가장 큰 고장요인이 되는 현상이며, 다양한 사고 사례가 알려져 있다. 본 연구에서는 유한요소해석법을 이용하여 전기 트리를 가지는 사각 버스바에 대한 전계해석을 진행하였고, 전기 트리를 방지 할 수 있는 사각 버스바의 절연 설계에 대한 방안을 제시한다. 이 설계 방안은 향후 전기 트리를 고려한 사각 버스바의 절연 설계 기초 데이터로 활용 될 것이다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.169-177
• /
• 2021

Recently, the use of electric and electronic control systems is increasing in the automobile industry. This increase in the electric and electronic control system greatly increases the complexity of designing a vehicle, which leads to an increase in the malfunction of the system, and a safety problem due to the malfunction is becoming an issue. Based on IEC 61508 relating to the functional safety of electrical/electronic/programmable electronics, the ISO 26262 standard specific to the automotive sector was first established in 2011, and a revision was published in 2018. Malfunctions due to system failure are covered by ISO 26262, but ISO/PAS 21448 is proposed to deal with unintended malfunctions caused by changes in the surrounding environment. ISO 26262 sets out safety-related requirements for the entire life cycle. Functional safety analysis includes FTA (Fault Tree Analysis), FMEA (Failure Mode and Effect Analysis), and HAZOP (Hazard and Operability). These analysis have limitations in dealing with failures or errors caused by complex interrelationships because it is assumed that a failure or error affecting the risk occurs by a specific component. In order to overcome this limitation, it is necessary to apply the STPA (System Theoretic Process Analysis) technique.