• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.15-19
• /
• 2013

This paper is to analyze and study the cause of fire examples produced because of short phenomenon by electric connecting damage and contacting engine over-heating with combustible materials in engine room of vehicle. In the first example, it knew the fact that the fire produced by contacting with body of vehicle because of loosed of bracket bolt for wire fixing that installed on the transmission case the battery power cable supply the power from battery of engine room to starting motor. In the second example, it certified the fire by short phenomenon because of insulation tape melting wound wiring lined from battery to starting motor. In the third example, it sought for fire's cause that melting phenomenon the wire coating by overheated engine as the wire disconnected with connector by the vibration. Therefore, the fire of system including engine electric made in the danger the people in the car by failure of engine and other system. And than, the car's driver must manage and examine a vehicle conscientiously.

• Journal of Advanced Navigation Technology
• /
• v.12 no.1
• /
• pp.46-53
• /
• 2008

The ITS(Intelligent Transport System) enables us to provide solutions on traffic problems, while maximizing safety and efficiency of road and transportation systems, by combining technologies from information and communication, electrical engineering, electronics, mechanics, control and instrumentation with transportation systems. The issues that an integration system for massive traffic data sources must face are due to several factors such as the variety and amount of data available, the representational heterogeneity of the data in the different sources, and the autonomy and differing capabilities of the sources. In this paper, we describe how to extract and load of the heterogeneous massive traffic data from the operational databases, such as FTMS and ARTIS using commercial tools. Also, we experiment on traffic data warehouses with integrated quality management techniques for providing high quality data.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.398-406
• /
• 2013

Nuclear medicine imaging devices such as PET diagnose disease after injecting radiopharmaceuticals in human body for diagnosis. Radiopharmaceuticals should maintain the proper pH for human body safety. In general, pH paper is used to measure the pH of the radiopharmaceutical. pH of the sample compared with the standard color chart is used for measurement. However, the pH reading difference according to the experience of a rater can be generated. Also, a pH meter for measuring pH has a high sensitivity and contamination of the sensor must be avoided. In this paper, we developed the new hardware device for pH reading method and software was developed with vision algorithm to measure pH easily and simply.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.274-280
• /
• 2018

In this paper, we have developed the vacuum infusion automation system for the safety and quality advancement of the boat. It is necessary for the precise mixing rate of resinoid and curingagent to inject in an inner ship and deck at short time. We need for the optimal condition to a strengthen construction of boat. This one can solve the post deformability of the strengthen structure and can control the precise mixing rate of resinoid and curingagent to the resinoid fluidity and flowing rate per time. Under these condition, we can advance the an quality construction that based on the model and database information of the boat. Also, we can have an effective process management and retrench the production cost.

• Tunnel and Underground Space
• /
• v.17 no.1 s.66
• /
• pp.26-31
• /
• 2007

The 11 nuclear power plants have been taking charge of more than 40% of the total electrical power development in Korea. In addition to the existing nuclear power plants at Gori, Wolsung, Youngkwang, etc., the 12 nuclear power plants are expected to be newly established until 2006. So, the 23 nuclear power plants will produce the electric power as much as more than 50% of the national gross production. However the nuclear power plants are inevitably generating the detrimental atomic wastes. Therefore the disposal techniques for the nuclear wastes should be ensured considering a very high safety factor. According to the basic researches in KAERI, the underground disposal repositories are reported to be most favorable for Korea. The KBS-3 disposal system has been strongly suggested by KAERI and this system has a deep tunnel with several disposal boreholes in tunnel floor. The nuclear wastes, which are sealed tightly in a canister, will be disposed in these boreholes. Considering the disposal tunnel in a great depth, the in-situ stress regimes will affect severely the tunnel stability. Consequently the effect of the in-situ stresses on the disposal tunnel and the role of the in-situ stresses in tunnel stability analysis are examined by the numerical studies.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.147-153
• /
• 2020

Conventional lane detection algorithms have problems in that the detection rate is lowered in road environments having a large change in curvature and illumination. The probabilistic Hough transform method has low lane detection rate since it exploits edges and restrictive angles. On the other hand, the method using a sliding window can detect a curved lane as the lane is detected by dividing the image into windows. However, the detection rate of this method is affected by road slopes because it uses affine transformation. In order to detect lanes robustly and avoid obstacles, we propose driving assist system using semantic segmentation based on deep learning. The architecture for segmentation is SegNet based on VGG-16. The semantic image segmentation feature can be used to calculate safety space and predict collisions so that we control a vehicle using adaptive-MPC to avoid objects and keep lanes. Simulation results with CARLA show that the proposed algorithm detects lanes robustly and avoids unknown obstacles in front of vehicle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4083-4094
• /
• 2011

The Electric Power Steering (EPS) has been applied to the vehicles due to its better fuel efficiency, better steering feel, and the compact volume compared to the hydraulic power steering. The brushed PM (Permanent Magnet) DC motors had been adopted in most of the EPS systems until several years ago due to its easy control and a simple hardware configuration of the power converter, but nowadays the BLAC (Brushless AC) motor is becoming more popular for the EPS system because of its high efficiency and long lifetime. This paper reviews the configuration of the EPS system and the BLAC motor and drive technologies based on the papers published recently. The torque ripple reduction for steering feel and the fault detection algorithms for safety are also reviewed.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.844-851
• /
• 2019

As wearable technology is becoming more common and a part of our lives, there have been many efforts to offer various smart services with wearable devices, such as motion recognition, safety of driving, and so on. In this paper, we present a method that exploits the 9-axis inertial sensors embedded in a smartwatch to identify whether the user is a vehicle driver or not and to estimate the steering wheel turning direction in the vehicle. The system consists of three components: (i) position recognition, (ii) driver recognition, and (iii) steering-wheel turning detection components. We have developed a prototype system for detecting user's motion with Arduino boards and IMU sensors. Our experiments show high accuracy in recognizing the driver and in estimating the wheel rotation angle. The average experimental error was $11.77^{\circ}$ which is small enough to perceiver the turning direction of steering-wheel.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.338-343
• /
• 2022

The Air Radio Station plays a role in creating skyways for aircraft and helping them fly safely through aviation mobile communication facilities (U/VHF transceivers) and various navigation safety facilities. It is necessary to remove large trees and weeds around the aircraft because accurate and safe signals must be provided without interruption. During the mowing work for the efficient management of landscaping facilities, there have been cases in which noise is introduced by Lawn Mower, which hinders control work. Accordingly, in order to analyze how mower affects air mobile communication facilities, the interference effect on air mobile communication facilities was analyzed for four types of mower, two-stroke, and battery type. As a result of the analysis, it was found that the two-stroke mower greatly affects air mobile communication facilities.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.171-176
• /
• 2023

In the modern society of the 21st century, portable electronic products using secondary batteries are continuously becoming lightweight and miniaturized. And along with this trend, we are active in the era of the Fourth Industrial Revolution, where we collect and share information in our daily lives using wearable electronic devices. Therefore, the role of secondary batteries that can be recharged while using small home appliances and digital devices is increasingly important. Along with this increase, secondary battery performance tests require various test methods such as characteristics, lifespan, failure diagnosis, and recycling. In addition, the construction of a battery test system to ensure the safety and proper functioning of the battery, along with guidelines and correct basic knowledge are being considered. Therefore, in this paper, we will examine the characteristics of the secondary battery Li-ion battery according to the charging and discharging scenarios directly connected to the performance of the battery.