• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.995-996
• /
• 2007

This study is for a design of a spindle motor for 1.8 inch hard disk drives(HDDs). Equivalent magnetic circuit model is applied for a basic design of the motor, a specific configuration design and magnetic distribution characteristics are confirmed using finite element analysis. Besides, thrust forces generated between rotor and stator core and thrust pad are calculated for pressure analysis of fluid dynamic bearings.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.97-99
• /
• 1998

This paper presents a numerical study of the behavior of the transformer winding, when stressed by the standard impulse voltage. The mathematical model of the transformer takes several points into the account. Capacitance of not adjacent winding as well as adjacent winding, eddy current loss caused by self and mutual inductance given as the functions of frequency. Not like the previous approach where calculation of capacitance is performed, in average sense. In this paper, capacitance of both adjacent and not adjacent winding is calculated using the numerical approach(B.E.M.), so they can get the more accurate value of capacitance. Because of frequency dependency of inductance, numerical-laplace-transform technique is required. Finally, to validate this approach, a simple test winding is simulated.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.515-521
• /
• 1986

Performances of a piezoelectric ultrasonic transducer are analyzed considering the internal losses of a piezoleelctric material and fabricated layers. The KLM-model is adopted for the equivalent circuit of a piezoelectric resonator, and the attenuation coefficient is introduced to represent the internal losses of the transducer. The attenuation coefficient of a piezoelectric resonator is inversely proportional to the maximum value of the input electrical resistance, and is confirmed to be an efficient parameter for the analysis of the considerable lossy piezo-electric resonator operating in a thickness mode. Also, the experimentla RTII is obtained by pulse-echo method. The experimental result is deviated from the predicted one within 3 dB over the 20dB frequency bandwidth.

• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.286-292
• /
• 2020

This study proposes a power decoupled multi-port dual-active-bridge (DAB) DC-DC converter employing multiple transformers. Conventional multiport DAB DC-DC converters experience a power coupling issue from the use of a single transformer, which essentially requires complex power decoupling control. To solve this issue, a multiport DAB DC-DC converter employing multiple transformers is proposed to decouple output power without additional complex control algorithms. The proposed converter uses multiple transformers that can expand output ports easily. Therefore, transformers and the proposed multi-port DAB converter can be designed simply. In addition, the number of coupling inductors can be reduced in the proposed three-port DAB converter compared with that in conventional multiport DAB converters. The power decoupling characteristics and equivalent circuit of the proposed converter are analyzed using theoretical model approaches. Finally, a 3-kW laboratory prototype is developed to verify the effectiveness of the proposed converter.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.641-644
• /
• 2009

We have studied on the microwave characteristics for the meander type inductors on the MgO substrates and $Al_2O_3$ substrates by employing 3-D high frequency simulation, respectively. Proper designs of meander type inductors were proposed and confirmed through the high frequency simulations, 5, 7, 9, 11, and 13 turns meander type inductors have been choose to analyze the electrical properties for the microwave passive component applications. The Al top electrodes have 282 nm length, 45 nm width, 100 nm thickness and 15 nm gap. The simulations were carried out from 50 MHz to 30 GHz, Frequency dependent inductances and quality factor were calculated by employing the equivalent circuit model of meander type inductors. The self resonances frequency of meander type inductor were shifted from high frequency to low frequency range as the number of the turn of inductors was increased. From the microwave simulations, the inductances and quality factors of meander type inductors were extracted through the scattering parameter.

• ETRI Journal
• /
• 제37권5호
• /
• pp.945-950
• /
• 2015

A novel microstrip low-pass filter is presented to achieve an ultra-wide stopband with 11 harmonic suppression and very sharp skirt characteristics. The filter is composed of a modified U-shaped resonator (which creates two fully adjustable transmission zeroes), a T-shaped resonator (which determines a cut-off frequency), and four radial stubs (which provide a wider stopband). The operating mechanism of the filter is investigated based on a proposed equivalent-circuit model, and the role of each section of the proposed filter in creating null points is theoretically discussed in detail. The presented filter with 3 dB cut-off frequency ($f_c=2.35GHz$) has been fabricated and measured. Results show that a relative stopband bandwidth of 164% (referred to as a 22 dB suppression) is obtained while achieving a high figure-of-merit of 15,221.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.398-410
• /
• 2017

This work presents the design of a dual extended Kalman filter (EKF) as a state/parameter estimator suitable for adaptive state-of-charge (SoC) estimation of an automotive lithium-iron-phosphate ($LiFePO_4$) cell. The design of both estimators is based on an experimentally identified, lumped-parameter equivalent battery electrical circuit model. In the proposed estimation scheme, the parameter estimator has been used to adapt the SoC EKF-based estimator, which may be sensitive to nonlinear map errors of battery parameters. A suitable weighting scheme has also been proposed to achieve a smooth transition between the parameter estimator-based adaptation and internal model within the SoC estimator. The effectiveness of the proposed SoC and parameter estimators, as well as the combined dual estimator, has been verified through computer simulations on the developed battery model subject to New European Driving Cycle (NEDC) related operating regimes.

• 전자공학회논문지
• /
• 제53권10호
• /
• pp.123-130
• /
• 2016

고주파 유도가열장치는 LC 공진회로에 고주파 전원을 인가하여 금속을 가열 할 수 있다. 공진회로는 워크 코일과 전도 냉각 커패시터로 구성되며, 커패시터의 특성에 따라 열처리 설비의 성능을 좌우한다. 그러나 전도 냉각 커패시터는 국내 원천기술의 연구개발 부족으로 해외 수입 의존도가 높다. LC 공진 시 커패시터 내부의 발열을 최소화하고, 무효 전력손실을 줄이며, 내 전압특성이 우수한 커패시터가 요구된다. 국산화를 위하여, 선진 제조사의 완성품 커패시터의 주파수 응답 특성 분석에 대한 선행 연구가 필요하다. 주어진 로그-로그 특성 곡선의 임의 점에서 값을 읽기 위한 보간법을 연구하여 매틀랩 코딩으로 커패시터의 분석 도구로 적용하였다. 커패시터를 간단 화 된 RC 직렬 등가 회로로 가정하고, 등가 직렬 저항 ESL 값을 구하여 주파수 응답 특성 곡선을 재현하는 시뮬레이션을 시도하였다. 실제 무효전력의 피크 치에 대한 특성과 시뮬레이션 특성을 비교할 때 재현율이 83% 이상 결과 값으로 나타나는 것을 확인할 수 있었고, 이 알고리즘은 간단화 된 모델의 커패시터 특성곡선을 분석하여 예측 할 때 적용이 가능하다.

• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.10-21
• /
• 2006

850nm oxide VCSEL의 저전류 동작 가능성을 확인하기 위하여 off 전류와 on 전류를 최대한 낮춘 상태에서 VCSEL의 특성을 살펴보았다. Oxide VCSEL의 모델링을 위해 비율 방정식을 이용하여 대신호 등가회로를 만들었고, 실험 결과와 시뮬레이션 결과의 비교를 통해 각각의 계수와 특성변수를 추출하였다. 동특성에 큰 영향을 주는 커패시턴스 성분은 C-V 미터로 측정, 분석하였다. 완성된 대신호 등가회로 모델을 이용하여 커패시턴스 성분, 그리고 on 전류와 off 전류가 turn-on 특성과 turn-off 특성, eye-diagram에 미치는 영향을 분석하였다. 그 결과 지금까지는 무시해왔던 요소인 depletion 커패시턴스가 turn-on 특성에 큰 영향을 미치고, eye-diagram에도 큰 영향을 준다는 사실을 확인하였다. 그러므로 VCSEL의 고속 동작과 저전류 동작을 동시에 구현하기 위해서는 depletion 커패시턴스를 감소시키는 공정이 필요하다.