• 지구물리와물리탐사
• /
• 제18권4호
• /
• pp.232-240
• /
• 2015

자연 전자기장을 이용하여 지하 매질의 전기적 구조를 규명하는 자기지전류(magnetotelluric; MT) 탐사의 정확한 해석을 위해서는 특정 전기적 구조에 대한 정확한 수치적 반응을 구할 수 있는 3차원 모델링이 필수적이다. 특히, 매질내에 전기적 이방성이 있을 때는 MT 반응이 달라지므로 전기적 이방성의 영향을 고려한 MT 탐사 모델링이 필요하다. 특히, MT 탐사기법을 이용한 지열저류층의 모니터링과 같이 MT 반응의 작은 변화를 분석해야 하는 시간경과 자료의 해석의 경우, 대상 지역에 이방성이 존재할 경우 이를 고려할 수 있는 정확한 모델링이 필수적이다. 이 연구에서는 기존의 등방성만을 고려하던 유한차분법 MT 모델링 알고리듬을 수직 혹은 수평 횡등방성 이방성을 고려할 수 있도록 개선하였다. 개발한 알고리듬을 박리층 모델을 이용하여 검증한 후, 수직횡등방성 이방성이 MT 반응에 미치는 영향에 대해서 분석하였다. 향후에는 수평 횡등방성 이방성이 MT 반응에 미치는 영향에 대해서도 분석하고자 하며, 알고리듬을 더욱 발전시켜 경사 횡등방성 이방성까지 고려할 수 있도록 발전시키고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.399-400
• /
• 2008

The light efficiency of fringe-field switching (FFS) mode when using a liquid crystal (LC) with positive dielectric anisotropy was found to be dependent on the magnitude of dielectric anisotropy, such that the lower dielectric anisotropy, the higher. We studied out not only light efficiency but also response time according to dependence on the magnitude of dielectric anisotropy. Rising and decay time became fast and slow respectively according to decreasing the magnitude of dielectric anisotropy. This paper investigates electro-optical characteristic of FFS mode using LC with a positive dielectric anisotropy dependent on the magnitude of dielectric anisotropy of the LC.

• 한국해양학회지
• /
• 제23권3호
• /
• pp.146-157
• /
• 1988

북서 태평양에 분포하는 반 원양성 점토의 심해저 시추 코어를 이용한 공극율, 음파전달속도, 속도 비등방성, 전기비저항, 비저항 비등방성에 대한 성질이 측정 되었다. 음파속도와 비저항은 퇴적물 깊이에 따라 증가하고 반대로 공극율은 감소한다. 깊이에 따른 속도와 비저항의 비등방성의 변화양상은 거의 비슷하다. 수평방향으로 발달된 얇고 긴 공극과 일정한 방향성을 가지고 배열하는 점토광물이 속도의 비등방성의 원인이 될 수 있음이 제시되었다.

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.224-230
• /
• 2003

The voltage-dependent transmittance curve of a homogeneously aligned liquid crystal (LC) cell driven by fringe-electric field(named FFS mode) was studied, while changing dielectric anisotropy of a LC. The results show that for a LC with positive dielectric anisotropy while positioning at initial position. Therefore, we conclude that the dynamic stability is strongly dependent on the types of the LCs and voltage-dependent dynamics of the LC with negative dielectric anisotropy is staler than that of the LC with positive dielectric anisotropy in the FFS mode.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.533-537
• /
• 2000

It was known that chalcogenide glasses have the superior property of the photoinduced anisotropy(PA). In this study we observed the phenomenon of Ag polarized-photodoping in chalcogenide As$_{40}$ /Ge$_{10}$/Se$_{15}$ /S$_{35}$ and the double-layer of Ag doped As$_{40}$ /Ge$_{10}$/Se$_{15}$ /S$_{35}$ thin film using the irradiation with the polarized He-Ne laser light. The Ag polarized-photodoping results in reducing the time of saturation anisotorpy and increasing the sensitivity of linearly anisotropy intensity up to maximum 220% The Ag polrized-photodoping shows improvement of the photoinduced anisotropy property in polarized photodoping of the chalcogenide thin film. It will offer lots of information for the photodoping mechanism and analysis of chalcogenide thin film.in film.ilm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.303-305
• /
• 2000

The effect of anisotropy field on the high frequency magnetic characteristics of FeTaN films was investigated. Those films show good magnetic properties : 4$\pi$Ms of 13KG, Hc of 0.6 Oe, effective permeability(${\mu}$') of 800 with a stable frequency response up to 800MHz. The films also show a large anisotropy field(Hk) over 21Oe. It result from the increased anisotropy of patterned FeTaN films. The combination of high saturation magnetization and relatively high Hk in these films is believed to the partly responsible for FeTaN for the excellent high-frequency behavior.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.858-859
• /
• 2007

This paper deals with the characteristics analysis of Synchronous Reluctance (SynRM) with anisotropy rotor using a coupled FEM & Preisach model. The focus of this paper is the design relative to the output power on the basis of rotor materials of a SynRM. The coupled Finite Elements Analysis (FEA) & Preisach model have been used to evaluate nonlinear solutions. Comparisons are given with characteristics of normal synchronous reluctance motor and those of anisotropy rotor SynRM (ANISO-SynRM), respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.518-519
• /
• 2005

We have studied the transmittance of fringe-filed switching(FFS) using a liquid crystal with positive dielectric anisotropy. Generally, FFS having positive dielectric anisotropy has less transmittance than FFS using negative dielectric anisotropy. FFS mode transmittance depends on horizontal director deformation, however fringe filed is composed of vertical and horizontal field. Vertical field in the middle of electrode suppresses the transmittance of FFS mode, especially when we use positive one. So, it is important to prevent the LC director from the effect of vertical field. We changed the splay elastic constant and checked the transmittance. The transmittance of FFS having positive dielectric anisotropy was improved. Less tilted LC directors improve the transmittance of FFS using positive dielectric anisotropy. We can improve the transmittance by using LC which have high splay elastic constant when another LC properties are equal.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.380-385
• /
• 2013

We find a metastable vortex state of the perpendicular magnetic anisotropy free layer in spin transfer torque magnetic tunneling junctions by using micromagnetic simulations. The metastable vortex state does not exist in a single layer, and it is only found in the trilayer structure with the perpendicular magnetic anisotropy polarizer layer. It is revealed that the physical origin is the non-uniform stray field from the polarizer layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1351-1354
• /
• 2005

We report on the photoalignment process of pentacene thin film with optical anisotropy on treated buffer layers. The photopolymer, showing an anchoring transition, was used as a buffer layer to control the structural order of the pentacene molecules. Using the photoelastic modulator, it was found that the grain size and the optical anisotropy of the pentacene thin film were strongly correlated with each other.