• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1743_1744
• /
• 2009

In this paper, we propose a double network control approach for linear systems. Generally, there are two network control system structures: the direct structure and the hierarchical structure. Here, the hierarchical structure consists of a main controller and a remote controller. The network delay of the structure only appears in the closed loop between the main controller and the remote system. However, the delay can exist between the remote controller and the actuator. Therefore, we design the double network system with delays between the main controller and the remote system, and the remote controller and the actuator. Finally, we carry out simulations on the linear system to illustrate the effectiveness of the proposed control method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1803-1804
• /
• 2006

The purpose of this paper is to implement a Labview based TFDR Real Time system through the instruments of Pci eXtensions for Instrumentation(PXI). The proposed load impedance measurement algorithm was verified by experiments via the implemented real time system. The TFDR real time system consisted of the reference signal design, signal generation, signal acquisition, algorithm execution and results display parts. To implement real time system, all of the parts wore programmed by the Labview which is one of graphical programming languages. In the application software implemented by the Labview we were able to design a suitable reference signal according to the length and frequency attenuation characteristics of the target cable and controled the arbitrary waveform generator(ZT500PXI) of the signal generation part and the digital storage oscilloscope(ZT430PXI) of the signal acquisition part. By using the TFDR real time system with the terminal resistor on the target cable, we applied to the load impedance measurements. In the proposed load impedance algorithm a normalized time-frequency cross correlation function and a cross time-frequency distribution function was employed to calculate the reflection coefficient and phase difference between the input and the reflected signals.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.662-665
• /
• 2002

This paper describes a novel converter to implement high-speed binary-to-residue conversion for moduli 2$^{n}$ - 1, 2$^{n}$ , 2$^{n}$ +2$^{\alpha}$/($\alpha$$\in$｛0,1,…,n-1｝) without using look-up table. In our implementation, the high-speed converter can be achieved, because of the modulo addition time is independent of the word length of operands by using the Signed-Digit (SD) adders inside the modulo adders. For a LSI implementation of residue SD number system with ordinary binary system, the proposed binary-to-residue converter is the efficient circuit.cient circuit.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.84-87
• /
• 2003

Carbon nitride ($CN_x$) films were prepared by reactive RF magnetron sputtering system with DC bias at various deposition conditions and the electrical properties were investigated. The films were characterized by fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The metal-insulator-semiconductor (MIS) capacitor which has $Al/CN_x/Si$ structure was designed and fabricated to investigate the capacitance-voltage (C-V) characteristics. Dielectric constant of carbon nitride films is very small.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권2호
• /
• pp.12-15
• /
• 2012

This paper presents simulation and small-scale experimental tests of a fault current controller. Smart fault controller as proposed and proven conceptually in our previous work is promising technology for the smart power grid where distributed and even stochastic generation sources are prevalent and grid operations are more dynamic. Existing protection schemes simply limiting the fault current to the pre-determined set values may not show best performance and even lead to coordination failures, potentially leading to catastrophic failure. Thus, this paper designs fault current controller with a full bridge thyristor rectifier, embedding a superconducting coil for which the controller is electrically invisible during normal operation because the loss due to the coil is near-zero. When a fault occurs and the resulting current through the superconducting coil exceeds a certain value set intelligently based on the current operating condition of the grid, the magnitude of the fault current is controlled to this desired value by adjusting the firing angles of thyristors such that the overall system integrity is successfully maintained. Detailed time-domain simulations are performed and lab-scale testing circuits are built to demonstrate the desired functionality and efficacy of the proposed fault current controller.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.561-562
• /
• 2008

In this paper, we propose a establishment of system level environment to exploit PC system with SSD (Solid State Disk) by using TLM (Transaction Level Modeling) method with SystemC language. The reason why we choose this modeling method is that it eases RTL (Register Transfer Level) modeling burdens and we can accurately estimate the performance about different architectural changes. Also, it provides simulation speed which is relatively faster than RTL modeling method. The baseline architectural platform we implemented showed that SSD's internal transfer time is a dominant factor, so we need to improve that part and it is expected to be a good simulator to measure the system's overall performance by exploiting SSD's internal architectures.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 봄 학술발표논문집 Vol.27 No.1 (A)
• /
• pp.187-189
• /
• 2000

Nowadays, efforts are in progress for the standardization of CORBAbased telecommunication network management framework. To implement a network management system based on the framework completely, CORBA ORB and some of CORBA service should be installed in the element. And then, there must be the naming tree, which correspond to the containment relationships between components in the network element. If we use conventional OMG naming service to form the naming tree, all MOs, a software fragmenthat corresponds to each component in a system, should be instantiated. However, the network element is usually a kind of limited resource system, which cannot provide sufficient resources for applications run on it. Hence, instantiatingall MOs can cause problems for that kind of system, This paper presents Smart Naming Service architecture as a solution to the problem.

• 센서학회지
• /
• 제14권6호
• /
• pp.444-454
• /
• 2005

The IEEE 1451.4 standards defines an architectural model for interfacing smart transducers for sensors & actuators. This standard allows analogue transducers to communicate their identification and calibration data in a digital format. A digital format is called the TEDS (transducer electronic data sheet). However, the standard template TEDS of IEEE 1451.4 do not supports sensors to use in electronic tongue system, such as arrayed-potentiometric and voltametric sensors. In this paper, a solution to standardize sensors for E-Tongue (electronic tongue) and electronic tongue systems is presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.32-32
• /
• 2010

A epoxy/multilayered silicate nanocomposite was prepared by a new AC electric application method and micro silica particle was poured into the nanocomposite in order to prepare epoxy/micro-and-nano- mixed composites (EMNC). Electric insulation breakdown strength was measured in a sphere-sphere electrode system designed for the prevention of edge breakdown and the data were estimated by Weibull plot. As the exfoliated silicate nano-plates were homogeniously dispersed in the micro silica particles, the insulation property was higherd.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.958-964
• /
• 2015

This paper implements a model of a double excited three-degree-of-freedom motor (3-DOF) coupled with a PI current controller for position control. The rotational trends of the rotor according to the applied steps are identified using a motion equation. The simulation model is a complete electrical and mechanical model of a 3-DOF motor, which mainly consists of mechanical torque equations, a nonlinear equivalent magnetic circuit, and a PI current controller. This machine is tested using the manufactured control board using the same conditions as in the simulation, where the experimental results also verify the accuracy of the simulation results.