• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.1
• /
• pp.89-93
• /
• 2002

This paper introduces a vision-based on-line fabric inspection methodology of woven textile fabrics. Current procedure for determination of fabric defects in the textile industry is performed by human in the off-line stage. The advantage of the on-line inspection system is not only defect detection and identification, but also 벼ality improvement by a feedback control loop to adjust set-points. The proposed inspection system consists of hardware and software components. The hardware components consist of CCD array cameras, a frame grabber and appropriate illumination. The software routines capitalize upon vertical and horizontal scanning algorithms characteristic of a particular deflect. The signal to noise ratio (SNR) calculation based on the results of the wavelet transform is performed to measure any deflects. The defect declaration is carried out employing SNR and scanning methods. Test results from different types of defect and different style of fabric demonstrate the effectiveness of the proposed inspection system.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.691-701
• /
• 2019

To solve the problems in the contact charging of inspection robots, a wireless charging system for inspection robots and a control strategy are introduced in this paper. Circuit models of a wireless power system with a compound compensation circuit and a three-phase Class-D resonant inverter are set up based on circuit theory. An output voltage control method based on the equal spread regulation of the phase difference between adjacent phases and the parameter correction method in the primary compound compensation circuit are proposed. The dynamic characteristics of the key parameters varying with the secondary coil position are obtained to further investigate the adaptive location scheme during the access and exit processes of moving robots. Combining the output voltage control method and the adaptive location scheme, a transition control strategy for the standby and operation modes of the wireless charging systems for inspection robots is put forward to realize the system characteristics including the low standby power in the standby mode and the high receiving power in the operation mode. Finally, experiments are designed and conducted to verify the correctness of the theoretical research.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.812-816
• /
• 2015

Recently, various monitoring systems have been proposed to detect interaction performance between trains and infrastructure, as well as, various techniques to improve the accuracy and performance of such inspection equipment in high speeds. Especially, it is important to predict electric noise of high speed trains due to its effect on detection system accuracy. In this paper, we analyze various types of electrical noise in electric vehicles to improve the accuracy of the detection module of the inspection car. In detail, analysis of electric noise of high speed railway is performed as a function of speed based on field tests that were carried out by HEMU-430X (Highspeed Eletric Multiple Unit - 430 km/h eXperiment).

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.138-140
• /
• 2004

In this study, we develop a remocon inspection automatic system using machine vision technique. By our proposed inspection system, the inspection accuracy and processing time was considerably improved.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.14-20
• /
• 2009

The goal of image processing is to improve the visual appearance of images for human viewers. The histogram is an important tool which can be used as basic data of digital image processing. Therefore, to effectively manage a histogram in digital image processing is very important. Currently machine vision systems are used in many appearance inspection fields instead of inspection by human. However, the appearance inspection result by machine vision system is mainly influenced by illumination of workplace. In this paper, we propose a histogram transform method for improving accuracy of machine visual inspection. The enhancement effect of area feature is obtained by performing proposed histogram transformation in area that needs improvement The proposed algorithm is verified by appearance inspection of jig plate samples.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.425-427
• /
• 2006

In this paper, an automatic side-view inspection algorithm for LCD modules is proposed. Until now, most parts of inspection is performed by human inspectors, which means very high product costs. So inspection automation is the very hot issue in the LCD industries. However, it is not easy problem to replace the human by computer vision system. In the many inspections which are based on the human eyes, side-view inspection is most hard problem to solve. In this paper, an image morphing algorithm is developed, which will help to enable the automation of the side-view inspection process.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2049-2051
• /
• 2002

X-ray inspection of tires is now feasible and commercially available. The enabling technologies are economical yet powerful computing systems and high-resolution, high-dynamic range X-ray imaging systems customized for tire inspection. The key advantages of reduced inspection labor, highly consistent inspection and yield improvement are now realizable.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.370-378
• /
• 2004

An autonomous pipeline inspection gauge system has been developed for determining position, orientation, curvature, and deformations such as dents and wrinkles of operating pipelines by Korea Gas Company and Seoul National University. The most important part of several subsystems is the Strapdown Inertial Measurement Unit (SIMU), which is integrated with velocity and distance sensors, weld detection system, and digital recording device. The Geometry Pipeline Inspection Gauge (GeoPIG) is designed to operate continuously and autonomously for a week or longer in operating gas pipelines. In this paper, the design concepts, system integration, and data processing/analysis method for the PIG will be presented. Results from the recent experiment for a 58 kilometer gas pipeline will be discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.72-79
• /
• 2016

Uninterruptible power supplies are extensively used as backup power in various applications such as telecommunication systems, Internet data centers, hospitals, and military technologies. Some of these applications require a considerable number of batteries, and the maintenance of such batteries is critical for the reliability of a system. However, batteries are chemical energy storage devices that deteriorate over time and frequently inspecting their performance and suitability is difficult. A real-time remote battery inspection system that applies electrochemical impedance spectroscopy is proposed and implemented in this study. The proposed system consists of a small inspection circuit and software for control. The former is developed to monitor the impedance variation of the battery and to diagnose its state. The validity and feasibility of the proposed system is proven by experimental results.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3070-3072
• /
• 1999

We developed an automatic 3D inspection system. The system consists of two parts : one includes hardwares such as actuators, linear scales and a probe, etc. the other involves softwares for management and control of the system. Compared with existing 3D measurement systems, this system achieved automatically the inspection. This automatic inspection makes the system have some advantages to reduce a measurement time and to be easily used by operators.