• 제목/요약/키워드: Electrical IT Equipment

검색결과 1,192건 처리시간 0.026초

고순도 Ge 검출기의 전기적 노이즈 감소를 통한 감마선 에너지 스펙트럼의 분해능 향상에 관한 연구 (A Study on the Improvement of Gamma Ray Energy Spectrum Resolution through Electrical Noise Reduction of High Purity Ge Detector)

  • 이삼열
    • 한국방사선학회논문지
    • /
    • 제14권7호
    • /
    • pp.849-856
    • /
    • 2020
  • 감마선 에너지 스펙트럼 연구에서 에너지 분석을 통한 핵종 분석은 매우 중요하다. 감마선 에너지 측정에 일반적으로 사용되는 고순도 Ge 검출기는 높은 에너지 분해능과 상대적으로 높은 검출 효율 때문에 일반적으로 사용된다. 그러나 반도체 검출기는 높은 에너지 분해능을 유지하기 위해 주변 환경에서 발생하는 노이즈를 효과적으로 차단하지 않으면 원래의 성능을 유지하기 어렵고 고가의 장치의 효과를 얻지 못하는 문제점이 있. 따라서 본 연구에서는 검출기에서 발생하는 전기적 노이즈를 제거하기 위해 접지 루프 아이솔레이터 (NEXT-001HDGL)를 사용했다. 에너지 분해능 향상 효과를 테스트하기 위해 양성자 가속기 KOMAC에 새로 설치된 HPGe 검출 장치를 사용했다. 감마선 에너지 2614 keV의 경우 에너지 분해능이 (0.16 ± 0.02) %에서 (0.11 ± 0.01) %로 개선되었고, 감마선 에너지 662 keV의 경우 에너지 분해능이 (0.72 ± 0.07) %에서 0.27 ± 0.03 %로 향상되었다. 이 결과는 KOMAC (Korea Multi-Purpose Accelerator Complex)의 HPGe 검출 장비를 이용한 감마선 스펙트럼 연구에 매우 유용한 것으로 판단된다.

국내 인·허가 온열의료기기 기술 현황 조사 및 분석 (The Current State of Intended Equipment for Heating in Medical Use Based on Domestic Licensed Medical Devices)

  • 임수란;박정환;박지연;김송이
    • Korean Journal of Acupuncture
    • /
    • 제40권4호
    • /
    • pp.156-168
    • /
    • 2023
  • Objectives : This study aimed to determine the status of thermal stimulation devices approved in Korea for medical applications over the past 10 years, and based on this, to obtain insight for future thermal treatment in Korean medical institutions. Methods : We searched the item classification list entitled "Regulations on Medical Device Items and Rating by Item" from the Ministry of Food and Drug Safety Notice No. 2021-24, 2021 (Enforced March 19, 2021; www.mfds.go.kr) for individually licensed heaters using the terms "heat" and "heating". Results : We identified 17 items of thermal stimulation product group, of which 1,308 devices were licensed by February 4, 2022, and 53.2% of them (n=696) were devices with valid permits for distribution in Korea. Among the licensed devices, heating pad systems under/overlay (electric, home use) were approved the most, but combinational stimulator (for medical use, home use; Grade 2) accounted for the highest percentage among the current valid permission. Moxibustion apparatuses were licensed separately for electrical use and non-electrical use, and occupied a low percentage of the total devices. We analyzed 307 devices that were accompanied by technical documents and found that the heat sources were wires in 145 (47.2%), infrared rays in 44 (14.3%) and ultrasonic waves in 42 (13.7%) devices. Most (83.1%) devices were used for pain relief, while other applications included beauty, cancer treatment, maintenance of infant body temperature, and healing fractures. Conclusions : Thermal stimulation devices accounted for about 0.9% of all medical devices, and among them, combinational stimulators and heating pad systems under/overlay had the most valid permits. Thermal stimulation devices using heating wires and infrared rays were the most prevalent, and most were used to relieve pain. In order to develop a range of thermal stimulation devices that can be utilized in Korean medical institutions, it is imperative that they have potential applications beyond pain management, addressing various medical purposes. To achieve this, foundational research is necessary to effectively apply diverse heat sources based on medical objectives.

The Contribution of Innovation Activity to the Output Growth of Emerging Economies: The Case of Kazakhstan

  • Smagulova, Sholpan;Mukasheva, Saltanat
    • 유통과학연구
    • /
    • 제10권7호
    • /
    • pp.33-41
    • /
    • 2012
  • The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

  • PDF

PCBs 함유 고상폐기물의 분석방법 고찰 (Analytical method of PCBs-containing solid wastes)

  • 박진수;강영렬;송기봉;전태완;전진원;신선경;정광용
    • 분석과학
    • /
    • 제22권6호
    • /
    • pp.471-479
    • /
    • 2009
  • 본 연구에서는 PCBs 함유 고상폐기물의 효율적 관리를 위해 현행 폐기물 공정시험방법의 용출 시험방법을 고상폐기물 종류별 표면채취법, 부재시험방법, 세정시험방법 등의 함량시험방법과 비교검토하여 PCBs 함유 고상폐기물의 시험방법(안) 및 기준(안)을 마련하였다. 우리나라의 표면채취법에 의한 비함침성 고상폐기물의 규제기준은 미국 및 일본과 같은 수준으로 각 국의 액상폐기물인 절연유 기준과 표면채취법에 의한 처리기준의 수치적 관계를 이용하여 산출하는 것이 타당한 것으로 판단되어진다. 이에 PCBs 함유 고상폐기물 중 규소강판 등 표면채취가 가능한 평면형 비함침성 부재는 표면채취법으로 시료를 채취하여 함량분석법으로 분석하는 경우, 비함침성 고상폐기물의 규제기준(안)을 $0.4 {\mu}g/100cm^2$으로 설정하였다. 또한, 표면채취가 어려운 시료를 일정한 크기로 잘라 부재를 채취한 후 함량분석법으로 분석하는 경우에는 규제기준을 0.04 mg/kg을 제안하였다.

선박 기관실에서의 금속체 표면파 통신 활용 연구 (Experimental Study of Metal Surface Wave Communication for Engine room of Vessels)

  • 공진우;김학선
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2022년도 춘계학술대회
    • /
    • pp.108-109
    • /
    • 2022
  • 본 연구는 선박 내부의 기관실에서 금속체 표면파를 이용하여 통신할 때 기관 구동으로 발생하는 잡음 간섭에 대하여 실험을 통한 데이터를 수집, 분석하였다. 실험은 순톤수 265톤 예인 선박의 기관실의 임의의 7구역을 선정하여 기관 구동 전과 구동 중에 생기는 잡음 성분을 신호 분석기를 통해 측정하고 표면파 통신에 미치는 영향을 측정하였다. 잡음 성분의 분석을 토대로 실제의 통신망을 구성하여 금속 격벽으로 이루어진 구역에서의 표면파 통신의 특성을 확인하기 위하여 실제의 통신망은 3개의 금속 격벽 사이로 통신장비를 설치하여 무선통신과 비교 실험을 진행하여 그 차이점을 확인하였다. 그 결과 표면파 통신의 경우에는 격벽 3개의 환경에서 기관의 구동 전후에 송수신 rate는 기관 구동 전과 구동 중인 상태에서 유의미한 차이가 없었으나 무선을 사용하는 Wi-Fi의 경우 구동 중인 상태에서 현저한 성능 저하를 나타냄을 확인하였다. 실험 데이터를 분석한 결과 기관 구동으로 인한 잡음은 무선통신에는 영향을 주지만 표면파 통신에 영향을 주지 않음을 확인하였다. 따라서 선박 내의 전자파 잡음이 많은 구역에서도 선박의 금속 구조물을 이용하여 표면파 통신 시스템을 구성하였을 때 무선통신을 대체할 수 있고 나아가 선박 내 밀폐 공간 및 기관실에서의 표면파 통신의 적용이 가능할 것으로 생각한다.

  • PDF

차세대 웨어러블 디바이스를 위한 높은 기계적/전기적 특성을 갖는 CNT-Ni-Fabric 유연기판 (CNT-Ni-Fabric Flexible Substrate with High Mechanical and Electrical Properties for Next-generation Wearable Devices)

  • 김형구;노호균;차안나;이민정;하준석
    • 마이크로전자및패키징학회지
    • /
    • 제27권2호
    • /
    • pp.39-44
    • /
    • 2020
  • 최근 웨어러블 장치에 적용하기 위한 유연성 기판에 대한 연구가 활발히 진행되고 있다. 특히, 유연성 기판 중 의복에 웨어러블 장치를 적용하기 위한 전도성 섬유기판에 대한 연구가 진행되고 있다. 본 연구에서는, 면섬유 기판 표면에 CNT와 Pd복합 용액을 스프레이 법을 이용하여 형성하였고, 무전해 도금법을 이용하여 금속층을 도금하였다. 도금된 섬유기판의 형상을 분석하기 위하여 SEM 장비를 이용하였고, CNT를 증착한 섬유기판의 표면에 Ni 레이어가 형성된 것을 확인하였다. EDS 분석을 통하여 섬유기판의 표면에 형성된 물질이 Ni임을 알 수 있었다. 전기적 특성을 확인하기 위하여 4-point probe로 무전해 도금을 진행한 섬유기판의 표면저항 및 저항 분포를 확인하기 위한 맵핑을 진행하였다. 무전해 도금의 진행 시간이 길어질수록 전도성이 향상되었음을 확인할 수 있었고, 표면 위치 별 저항의 분포가 균일함을 알 수 있었다. 인장력, 굽힘, 뒤틀림 시험을 통하여 기계적 스트레스로 인한 저항변화를 측정하였다. 그 결과 도금 시간이 길어질수록 유연성 기판의 저항변화가 점점 사라지는 것을 확인하였다. UTM(Universal testing machine)을 이용하여 도금시간 변화에 대한 무전해 도금 기판의 기계적 특성 향상 여부에 대하여 분석하였다. 인장강도는 무전해 도금을 2 시간 동안 진행한 전도성 섬유기판의 경우, 면섬유 기판보다 약 16 MPa 증가하였다. 이러한 결과들을 토대로 Ni-CNT-Fabric 유연기판은 의류 일체형 전도성 기판으로 이용되기에 충분함을 확인하였고, 이러한 연구 결과는 유연기판, 웨어러블 디바이스뿐만 아니라 유연성이 필요한 배터리, 촉매, 태양전지 등에 적용되어 발전에 기여할 수 있을 것으로 기대한다.

해상 매립 지역 산업 플랜트 건설 시 감전 재해 예방을 위한 안전 접지에 관한 연구 (A Study on the Safety Grounding for Prevention of Electric Shock Hazard in Construction of Industrial Plant in Maritime Landfill Area)

  • Kim, Hong-Yong;Jang, Ung-Burm
    • 한국재난정보학회 논문집
    • /
    • 제13권3호
    • /
    • pp.305-312
    • /
    • 2017
  • 우리사회는 고도화, 첨단화, 정보화 산업들이 지속적으로 성장을 거듭하여 현재는 4차 산업 혁명의 시대에 살고 있다. 산업이 발달함에 따라 사용자의 부하도 다양하게 급증하였고 이는 에너지 부족 현상으로 심화되어 추가적인 에너지 시설의 건설이 요구되고 있는 실정이다. 이에 해안 지역을 중심으로 에너지 플랜트 건설공사가 활발히 진행되고 있다. 특히, 발전소 가스 석유화학 플랜트 등의 건설 시 국토가 부족한 우리나라의 실정을 고려하여 타 지역의 토양으로 해안을 매립하고 그 지반에 플랜트 시설을 건축하는 방식으로 시행되고 있다. 현재의 국내 접지 설계는 전기설비설계기술기준에 근거한 접지저항만을 용도에 맞게 결정하는 설계와 시공이 이루어지고 있다. 하지만 이렇게 검증되지 않은 매립된 토양에 건립한 플랜트 시설에 뇌격전류 및 이상전류 유입 시 대지 전위상승으로 인한 설비 운용자나 사용자가 감전재해 위험에 심각하게 노출 되게 된다. 따라서 플랜트 시설의 부하 특성에 최적화된 접지시스템이 요구되고 있어, 본 논문에서는 매립된 토양의 대지고유저항을 분석하고 KS C IEC 61936-1 규격을 적용한 컴퓨터 프로그램(CDEGS)을 활용하여 감전재해를 일으키는 접촉전압과 보폭전압을 해석하여 플랜트 설비에 최적화된 접지설계를 제안하고자 한다.

Atmospheric Plasma Spray코팅을 이용한 Yttrium계 소재의 내플라즈마성 및 세정 공정에 관한 연구 (A Study on Plasma Corrosion Resistance and Cleaning Process of Yttrium-based Materials using Atmospheric Plasma Spray Coating)

  • 권혁성;김민중;소종호;신재수;정진욱;맹선정;윤주영
    • 반도체디스플레이기술학회지
    • /
    • 제21권3호
    • /
    • pp.74-79
    • /
    • 2022
  • In this study, the plasma corrosion resistance and the change in the number of contamination particles generated using the plasma etching process and cleaning process of coating parts for semiconductor plasma etching equipment were investigated. As the coating method, atmospheric plasma spray (APS) was used, and the powder materials were Y2O3 and Y3Al5O12 (YAG). There was a clear difference in the densities of the coatings due to the difference in solubility due to the melting point of the powdered material. As a plasma environment, a mixed gas of CF4, O2, and Ar was used, and the etching process was performed at 200 W for 60 min. After the plasma etching process, a fluorinated film was formed on the surface, and it was confirmed that the plasma resistance was lowered and contaminant particles were generated. We performed a surface cleaning process using piranha solution(H2SO4(3):H2O2(1)) to remove the defect-causing surface fluorinated film. APS-Y2O3 and APS-YAG coatings commonly increased the number of defects (pores, cracks) on the coating surface by plasma etching and cleaning processes. As a result, it was confirmed that the generation of contamination particles increased and the breakdown voltage decreased. In particular, in the case of APS-YAG under the same cleaning process conditions, some of the fluorinated film remained and surface defects increased, which accelerated the increase in the number of contamination particles after cleaning. These results suggest that contaminating particles and the breakdown voltage that causes defects in semiconductor devices can be controlled through the optimization of the APS coating process and cleaning process.

Pulse Oximeter를 이용한 치수생활력측정 (PULSE OXIMETER AS A DIAGNOSTIC TEST OF PULP VITALITY)

  • 구본경;이제호;이종갑
    • 대한소아치과학회지
    • /
    • 제27권1호
    • /
    • pp.103-107
    • /
    • 2000
  • 치수 생활력 검사시 전통적인 방법으로 전기치수검사나 온도변화검사 등이 있다. EPT와 ice test 즉, 전기치수검사와 온도변화검사는 치아의 신경학적 반응에 의해 치아의 실활여부를 판단하는 방법으로 환자가 아동일때는 정확한 반응을 얻기가 어렵고, 환자의 주관적 반응을 판단해야 하므로 객관적이지 못하고, 소아 환자에게 좋지 못한 자극을 주어 행동 조절의 문제를 일으키며, 거짓 양성반응과 거짓 음성반응이 나을 수 있다는 등의 한계가 있다. 최근에는 전통적인 방법의 한계를 극복하려는 시도에서 혈관의 보전성을 평가하는 방법인 laser doppler flowmetry와 pulse oximeter를 이용하는 방법이 소개되고 있다. Pulse oximeter의 원리는 두 가지 종류의 파장의 빛을 귀, 손가락등 생체의 말단에 투과시켜 발산된 빛과 감지된 빛간의 두 파장의 흡수비로 산소 포화 정도를 알아내는 것으로서 이에 착안하여 또 하나의 생체 말단인 치아에 이를 적용하여 치아의 실활 여부를 판단하는 것이다. 이 보고에서는 치수 생활력 검사시 pulse oximeter의 사용 가능성에대해 검증하고 이의 임상적용에 대해 기초적 자료를 제공하고자 함을 목적으로 했는데 생활치 에서는 평균 96.3%의 산소 포화도를 실활치에서는 평균 0.0%의 산소 포화도를 얻어냄으로서 pulse oximeter가 치아의 실활여부 판단에 있어 유용한 진단도구로서의 가치가 있다는 것이 밝혀졌다.

  • PDF

$1980{\sim}2004$년 동안의 증시부양정책 및 증시규제정책의 실효성 (Effectiveness of Securities Market Plans, $1980{\sim}2004$)

  • 이재하;한덕희
    • 재무관리연구
    • /
    • 제23권2호
    • /
    • pp.143-170
    • /
    • 2006
  • 본 연구는 $1980{\sim}2004$년 동안 실시된 증시부양정책 및 증시규제정책의 실효성을 검증하기 위하여 단순수익률 분석, 사건연구 및 BFL검정을 통하여 증시정책 발표일 전후의 주가행태 및 주식수익률 변동성을 분석하였으며 연구의 결과는 다음과 같다. 첫째, 침체국면에 있는 증시를 부양하기 위한 증시부양정책과 과열국면에 있는 증시를 안정시키기 위한 증시규제정책의 실효성을 시장전체, 기업규모별, 업종별로 분석한 결과, 증시부양정책은 KOSPI, 대형주, 금융업, 제조업의 주가가 유의하게 상승하여 증시부양정책의 효과가 상당히 있는 것으로 나타났고 증시규제정책의 경우도 주가의 상승세가 멈추고 주가가 하락하여 증시규제정책의 효과가 있는 것으로 나타났다. 둘째, 증시정책이 시장전체에 미치는 영향에 더하여 기업규모별, 업종별로 추가적인 영향이 있는지를 분석한 결과 증시부양정책의 경우 대형주만 추가적 실효성이 있었고 증시규제정책의 경우 소형주와 전기 전자업, 유통업, 제조업이 추가적인 반응을 보였다. 셋째, BFL 검정결과 비교구간별로 증시정책 전후의 변동성이 동일한 것으로 나타남에 따라 주가를 부양하거나 진정시키기 위한 증시정책이 변동성에는 영향을 주지 않고 주식수익률에만 영향을 미치는 것으로 나타났다. 결론적으로 $1980{\sim}2004$년 동안 우리나라 증시정책이 주식시장에 대해 실효성이 어느 정도 있는 것으로 보이고 두 정책 모두 주식시장 변동성에는 달리 영향을 주지 않은 것으로 보인다.

  • PDF