• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2181-2186
• /
• 2014

Generally, the motor inside vehicle is exposed to highly ambient temperature and large vibration according to repeatedly starting and stopping for very short time. So, in this paper, the rotor shape design was performed to improve demagnetization endurance by considering the starting current of the Brushless DC (BLDC) Motor through the Finite Element Method(FEM). As a result, the partial irreversible demagnetization was occurred by starting current at the end of Permanent Magnets of the basic model. To solve this problem, the flux barrier design was performed and the flux on the rotor core was limited. Accordingly, demagnetization endurance and operating characteristics were improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.17-20
• /
• 2004

This paper is presented for the development of the brushless DC(BLDC) motor for the spindle motor of hard disk drives. To design the spindle motors for HDD, it is very important to consider the reduction of vibration and noises. To design the each parts and investigate the assemble of a motor, we need to calculate the press force and size variation according to the press force. If we design the each parts without the consideration of the size variation, we can not get good result of assemble and performance with exact size of parts. In this paper, we get the computer simulation results to verify optimal size and assemble.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.282-284
• /
• 1992

In this paper, we deal with design method of two-degree-of-freedom control system which desired property of robustness and tracking can be achieved simultaneously, Controller is designed by means of model matching method and H$\infty$ weighted sensitivity minimization design method. Satisfactory result of design example is obtained by simulation.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.37-42
• /
• 2013

This paper deals with Wound Rotor Synchronous Motor (WRSM) purposely designed for Integrated Starter and Generator (ISG) installed in 42V automotive electrical system. Not only design objective and specifications of WRSM, but its adaptive design to minimize torque ripple and back-EMF Total Harmonics Distortion (THD) are considered. Furthermore, design characteristics of designed prototype have been investigated numerically in terms of torque, back EMF, loss, and efficiency, which are verified by performance comparison with Interior Permanent Magnet Synchronous Machine based on Finite Element Analysis (FEA).

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1544-1550
• /
• 2014

In this paper, an adaptive optimization strategy utilizing Kriging model and genetic algorithm is proposed for the optimal design of electromagnetic devices. The ordinary Kriging assisted by the spherical covariance model is used to construct surrogate models. In order to improve the computational efficiency, the adaptive uniform sampling strategy is applied to generate sampling points in design space. Through several iterations and gradual refinement process, the global optimal point can be found by genetic algorithm. The proposed algorithm is validated by application to the optimal design of a switched reluctance motor, where the stator pole face and shape of pole shoe attached to the lateral face of the rotor pole are optimized to reduce the torque ripple.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.49-56
• /
• 2013

In this paper, for constrained optimization problem, one multi-objective optimization algorithm that ensures both performance robustness and constraint feasibility is proposed when uncertainties are involved in design variables. In the proposed algorithm, the gradient index of objective function assisted by design sensitivity with the help of finite element method is applied to evaluate robustness; the reliability calculated by the sensitivity-assisted Monte Carlo simulation method is used to assess the feasibility of constraint function. As a demonstration, the performance and numerical efficiency of the proposed method is investigated through application to the optimal design of TEAM problem 22--a superconducting magnetic energy storage system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.977-980
• /
• 1993

The technique to design high performance small motors has been based on experimental data, which results from lots of cost, experience and time in manufacturing. Recently, as high-performance computer appears, many engineers use numerical methods to design and analyze electric machine. Since, the step motor which has very small air gap(0.02-0.05mm) is different from other electric machine in its structure. The shape of rotor teeth and stator teeth influence seriously on the torque characteristics. And it is operated over magnetic saturation point. Therefore, the design of step motor needs to solve nonlinear problem and to calculate magnetic field precisely. In this paper, we solve nonlinear problem by employing Finite Element Method and obtain torque-displacement characteristics for the design of step motor. We also manufacture VR step motor according to the obtained results, and measure some torque characteristics. Through comparing calculated results with experimental results, it is verified that FEM is very useful to design step motor, and the motor designed by our technique is improved in its step accuracy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.541-542
• /
• 2007

The paper also introduces a new Distribution Class ground lead disconnector design that not only extends the claimable detonation range well below the 20 amps specified in industry standards, but is very durable when exposed to severe arrester durability tests. Finally. this paper shows how this next generation disconnector interacts with the connected arrester to improve the overvoltage withstand capability of the arrester assembly. The interaction of the disconnector grading capacitor with the series-connected arrester metal oxide disc elements actually improves the arrester assembly temporary overvoltage withstand capability, making the design less vulnerable to TOV failures. Since the vast majority of distribution class arresters are sold domestically with ground lead disconnectors, this design improvement in the disconnector to improve detonation reliability also translates into a significantly improved distribution class arrester design.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권2호
• /
• pp.27-30
• /
• 2007

The electrical insulation design and withstanding test of mini-model coils for 600 kJ class conduction cooled high temperature superconducting magnetic energy storage (HTS SMES) have been studied in this paper. The high voltage is generated to both ends of magnet of HTS SMES by quench or energy discharge. Therefore, the insulation design of the high voltage needs for commercialization, stability, reliability and so on. In this study, we analyzed the insulation composition of a HTS SMES, and investigated about the insulation characteristics of the materials such as Kapton, AIN and vacuum in cryogenic temperature. Base on these results, the insulation design for 600 kJ conduction cooled HTS SMES was performed. The mini-model was manufactured by the insulation design, and the insulation test was carried out using the mini-model.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.490-495
• /
• 2006

In this research, the design procedure and the design method of a single-phase line-start permanent magnet motor (LSPM) are proposed. In the design procedure, the permanent magnet is designed first and the windings and capacitors are designed later. As well, the points of design of each design parameter are explained. In the design of the single-phase LSPM, the equivalent circuit method is combined with the finite element method (FEM) because it has a shorter analysis time than FEM. The 400 watts single-phase LSPM is designed and manufactured. The characteristics of the manufactured single-phase LSPM are analyzed and experimented. From the analysis result and the experiment result, it is verified that the design procedure and the design method of the single-phase LSPM is valid.